100% solution for hang blackberry - GSM-Forum

trust4eve83 · 06-16-2012, 12:47

blackberry red bilinking and hang on blackberry logo solution

blinking red light solution for all blackberry
new and tried on 100s off bb modules success on all
1. download blackberry master control program and install it
2. download CFP_3.9.0.175.exe keep on desktop
3. open master control program and click on setting wheel on left hand side and
in enable protected control type BrickBerry same as it is here
4. right click on alien face cfp button at left hand side.
5. below in cfp option (rim command-line program (cfp) executable ) select the cfp which you copied on desktop.
6. connect your bb without battery on top command-line interface (CLI)
select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your bb install a battery and wait for few minutes let the phone do its job.
let the bb master control be open..........

now the trick is to load os
1. In bb master control on right hand side below right click on apploader
it will loader/nojvm connect your phone follow the instruction thats it you have done the job..

DONLOAD LINK ::: BLACKBERRY_HANG.rar

MOHSIN FROM SOUTH AFRICA

DONT FORGET TO THANX

R.Nasir.Ali · 06-16-2012, 14:36

Quote:

Originally Posted by trust4eve83

blackberry red bilinking and hang on blackberry logo solution

blinking red light solution for all blackberry
new and tried on 100s off bb modules success on all
1. download blackberry master control program and install it
2. download CFP_3.9.0.175.exe keep on desktop
3. open master control program and click on setting wheel on left hand side and
in enable protected control type BrickBerry same as it is here
4. right click on alien face cfp button at left hand side.
5. below in cfp option (rim command-line program (cfp) executable ) select the cfp which you copied on desktop.
6. connect your bb without battery on top command-line interface (CLI)
select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your bb install a battery and wait for few minutes let the phone do its job.
let the bb master control be open..........

now the trick is to load os
1. In bb master control on right hand side below right click on apploader
it will loader/nojvm connect your phone follow the instruction thats it you have done the job..

DONLOAD LINK ::: BLACKBERRY_HANG.rar

MOHSIN FROM SOUTH AFRICA

DONT FORGET TO THANX

this is my solution mohsin its not good to say others hard work my work

regards
nasir naqsbandi

R.Nasir.Ali · 06-16-2012, 14:47

Originally it is posted on many post by nasir before this man

he copied and pasted here

i think he is expert on copy past and get the credits

regards

nasir

tejaram · 06-16-2012, 15:16

Quote:

Originally Posted by trust4eve83

blackberry red bilinking and hang on blackberry logo solution

blinking red light solution for all blackberry
new and tried on 100s off bb modules success on all
1. download blackberry master control program and install it
2. download CFP_3.9.0.175.exe keep on desktop
3. open master control program and click on setting wheel on left hand side and
in enable protected control type BrickBerry same as it is here
4. right click on alien face cfp button at left hand side.
5. below in cfp option (rim command-line program (cfp) executable ) select the cfp which you copied on desktop.
6. connect your bb without battery on top command-line interface (CLI)
select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your bb install a battery and wait for few minutes let the phone do its job.
let the bb master control be open..........

now the trick is to load os
1. In bb master control on right hand side below right click on apploader
it will loader/nojvm connect your phone follow the instruction thats it you have done the job..

DONLOAD LINK ::: BLACKBERRY_HANG.rar

MOHSIN FROM SOUTH AFRICA

DONT FORGET TO THANX

bor good solution

wbr

tejaram

medellin_2010 · 06-16-2012, 15:17

Quote:

Originally Posted by rnasirali

this is my solution mohsin its not good to say others hard work my work

regards
nasir naqsbandi

does this solution is for all blackberry ????

R.Nasir.Ali · 06-16-2012, 15:21

brother mohsin

if above mention doesn't solve your problem then you have to follow this steps

you have missed to copy some more things some line here are those

if gives you error again go to step 6 select nuke and then wipe after this if says error dont cancel the procedure just disconnect the phone remove the battery re insert and wait untill the phone finish then connect the phone and press retry

R.Nasir.Ali · 06-16-2012, 15:23

Quote:

Originally Posted by medellin_2010

does this solution is for all blackberry ????

yes it is if you have any problem please contact me

thanks regards

nasir

Cell-Manager · 06-16-2012, 19:24

This does not work, please video, for those who do not understand English perfectly

psytr0nic · 06-16-2012, 21:01

Quote:

Originally Posted by rnasirali

this is my solution mohsin its not good to say others hard work my work

regards
nasir naqsbandi

Quote:

Originally Posted by rnasirali

Originally it is posted on many post by nasir before this man

he copied and pasted here

i think he is expert on copy past and get the credits

regards

nasir

Quote:

Originally Posted by medellin_2010

does this solution is for all blackberry ????

Quote:

Originally Posted by rnasirali

brother mohsin

if above mention doesn't solve your problem then you have to follow this steps

you have missed to copy some more things some line here are those

if gives you error again go to step 6 select nuke and then wipe after this if says error dont cancel the procedure just disconnect the phone remove the battery re insert and wait untill the phone finish then connect the phone and press retry

Quote:

Originally Posted by rnasirali

yes it is if you have any problem please contact me

thanks regards

nasir

show where you posted I will verify copyright ..

Shopno jaker · 06-16-2012, 22:54

thnxx nice post..........

Cell-Manager · 06-17-2012, 04:40

FAKE FAKE FAKE

Tested in 2 Blackberry 9900, this does not work

tbash · 06-17-2012, 05:45

link not working , it gives error in page pleaase repost working link

mayang · 06-17-2012, 06:04

keep it up bro we the *** blees you

R.Nasir.Ali · 06-17-2012, 14:05

Quote:

Originally Posted by Cell-Manager

FAKE FAKE FAKE

Tested in 2 Blackberry 9900, this does not work

what problem do u have share with me i wil try to help

thanks

R.Nasir.Ali · 06-17-2012, 14:07

Quote:

Originally Posted by tbash

link not working , it gives error in page pleaase repost working link

try this link

BLACKBERRY_red_blinking_hangsolution by nasir.rar

06-16-2012, 12:47	#1 (permalink)
trust4eve83 No Life Poster Join Date: Mar 2010 Location: south africa Age: 30 Posts: 519 Member: 1269056 Status: Offline Thanks: 404 Thanked 971 Times in 222 Posts	100% solution for hang blackberry *blackberry red bilinking and hang on blackberry logo solution* *blinking red light solution for all blackberry* *new and tried on 100s off bb modules success on all* 1. download blackberry master control program and install it 2. download CFP_3.9.0.175.exe keep on desktop 3. open master control program and click on setting wheel on left hand side and in enable protected control type BrickBerry same as it is here 4. right click on alien face cfp button at left hand side. 5. below in cfp option (rim command-line program (cfp) executable ) select the cfp which you copied on desktop. 6. connect your bb without battery on top command-line interface (CLI) select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your bb install a battery and wait for few minutes let the phone do its job. let the bb master control be open.......... *now the trick is to load os* 1. In bb master control on right hand side below right click on apploader it will loader/nojvm connect your phone follow the instruction thats it you have done the job.. *DONLOAD LINK ::: BLACKBERRY_HANG.rar* *MOHSIN FROM SOUTH AFRICA* *DONT FORGET TO THANX*

06-16-2012, 14:47	#3 (permalink)
R.Nasir.Ali No Life Poster Join Date: Oct 2009 Location: banglore Posts: 575 Member: 1141761 Status: Offline Sonork: 100.1618159 Thanks: 27 Thanked 340 Times in 135 Posts	This solution is copied from r nasir ali and pasted here Originally it is posted on many post by nasir before this man he copied and pasted here i think he is expert on copy past and get the credits regards nasir

06-16-2012, 15:21	#6 (permalink)
R.Nasir.Ali No Life Poster Join Date: Oct 2009 Location: banglore Posts: 575 Member: 1141761 Status: Offline Sonork: 100.1618159 Thanks: 27 Thanked 340 Times in 135 Posts	the solution is not complete bro brother mohsin if above mention doesn't solve your problem then you have to follow this steps you have missed to copy some more things some line here are those if gives you error again go to step 6 select nuke and then wipe after this if says error dont cancel the procedure just disconnect the phone remove the battery re insert and wait untill the phone finish then connect the phone and press retry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	26	09-25-2012 02:41
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	07-18-2012 07:57
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	11-17-2011 17:08
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware-Repair Area	1	12-27-2006 10:20
Operator-Logo for 5110	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	06-25-1999 15:50

06-16-2012, 19:24	#8 (permalink)
Cell-Manager Freak Poster Join Date: Feb 2005 Location: Ecuador Age: 43 Posts: 162 Member: 120932 Status: Offline Thanks: 175 Thanked 19 Times in 14 Posts	This does not work, please video, for those who do not understand English perfectly

06-16-2012, 22:54	#10 (permalink)
Shopno jaker Banned Join Date: Mar 2012 Location: BANGLADESH Posts: 239 Member: 1728755 Status: Offline Sonork: 100.1613242 Thanks: 249 Thanked 318 Times in 99 Posts	thnxx nice post..........

06-17-2012, 04:40	#11 (permalink)
Cell-Manager Freak Poster Join Date: Feb 2005 Location: Ecuador Age: 43 Posts: 162 Member: 120932 Status: Offline Thanks: 175 Thanked 19 Times in 14 Posts	FAKE FAKE FAKE Tested in 2 Blackberry 9900, this does not work

06-17-2012, 05:45	#12 (permalink)
tbash Freak Poster Join Date: Jul 2004 Posts: 475 Member: 71751 Status: Offline Thanks: 0 Thanked 4 Times in 4 Posts	link not working , it gives error in page pleaase repost working link

06-17-2012, 06:04	#13 (permalink)
mayang Junior Member Join Date: May 2008 Posts: 34 Member: 775346 Status: Offline Thanks: 3 Thanked 8 Times in 6 Posts	keep it up bro we the *** blees you