8320 problems. - GSM-Forum

gpz900ra7 · 10-23-2010, 12:03

I'll post this here too in the hope that someone can help me.

Hi, hoping that someone can help me with a problem I am having with an 8320 Curve.

When I insert the battery, or connect with USB lead, the RED LED lights up continually, then after a short while starts to blink, 2 blinks, short pause, 2 blinks, pause, 2 blinks, short pause, and then it seems to do this for ever.

I have tried connecting using c:/ prompt, and nojvm apploader, but nothing shows up, not even "unknown USB" just the blinking of the LED.

Any help would be fantastic, and be well appreciated.

Many thanks in advance.

gpz900ra7.

DemnZ · 10-23-2010, 12:18

download and install flashfile for your model ( hope it is already exist)
Open C:\Program Files\Common Files\Research In Motion\AppLoader and run Loader.exe
Connect your BB without battery to PC
Click next in Loader
Check needed apps for download and run downloading
On the second step ( initialization ) put battery in BB
Wait for finish
Hope it will help , if not try to leave BB without battery for 24 hours and try again all steps

gpz900ra7 · 10-23-2010, 13:08

Hi, and thanks for your reply.

I have tried all of those options, but still nothing. I even left the battery out for over 72 hours, and still the same results.

gpz900ra7.

DemnZ · 10-23-2010, 15:27

Then it is hardware problem , try to rehot CPU and Flash , but u can kill the phone !

gpz900ra7 · 10-23-2010, 15:32

YOIKES, not keen on that idea, lol.

Might just use it for spares.

gpz900ra7.

10-23-2010, 12:03	#1 (permalink)
gpz900ra7 Freak Poster Join Date: Sep 2010 Posts: 175 Member: 1406087 Status: Offline Thanks Meter: 26	8320 problems. I'll post this here too in the hope that someone can help me. Hi, hoping that someone can help me with a problem I am having with an 8320 Curve. When I insert the battery, or connect with USB lead, the RED LED lights up continually, then after a short while starts to blink, 2 blinks, short pause, 2 blinks, pause, 2 blinks, short pause, and then it seems to do this for ever. I have tried connecting using c:/ prompt, and nojvm apploader, but nothing shows up, not even "unknown USB" just the blinking of the LED. Any help would be fantastic, and be well appreciated. Many thanks in advance. gpz900ra7.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

10-23-2010, 12:18	#2 (permalink)
DemnZ Freak Poster Join Date: Nov 2008 Location: Azerbaijan Age: 53 Posts: 298 Member: 897164 Status: Offline Thanks Meter: 101	download and install flashfile for your model ( hope it is already exist) Open C:\Program Files\Common Files\Research In Motion\AppLoader and run Loader.exe Connect your BB without battery to PC Click next in Loader Check needed apps for download and run downloading On the second step ( initialization ) put battery in BB Wait for finish Hope it will help , if not try to leave BB without battery for 24 hours and try again all steps

10-23-2010, 13:08	#3 (permalink)
gpz900ra7 Freak Poster Join Date: Sep 2010 Posts: 175 Member: 1406087 Status: Offline Thanks Meter: 26	Hi, and thanks for your reply. I have tried all of those options, but still nothing. I even left the battery out for over 72 hours, and still the same results. gpz900ra7.

10-23-2010, 15:27	#4 (permalink)
DemnZ Freak Poster Join Date: Nov 2008 Location: Azerbaijan Age: 53 Posts: 298 Member: 897164 Status: Offline Thanks Meter: 101	Then it is hardware problem , try to rehot CPU and Flash , but u can kill the phone !

10-23-2010, 15:32	#5 (permalink)
gpz900ra7 Freak Poster Join Date: Sep 2010 Posts: 175 Member: 1406087 Status: Offline Thanks Meter: 26	YOIKES, not keen on that idea, lol. Might just use it for spares. gpz900ra7.