BlackBerry 9000

[lucky121]

hi every one i have facing this problem i change the battery and also use full 100% charge battery but still problem any body have any idea thnx

[Celfixx-Dubai]

@lucky121

I suggest you first do a NUKE then a WIPE with CFP.exe (you can find this on the forum here as well), then install the OS via bootrom method.

Full autoloaders/quick installers you can find here

Regards,

Celfixx Dubai

[lucky121]

my brother my problem is not solve just blinking now blackberry logo come and restart

[Celfixx-Dubai]

@lucky121

What was the state of the device previously?

1: Was it only red light blinking?
2: Did it show LOGO "before" you tried NUKE and WIPE and then full OS via bootrom?

You can also now try to do the update via Desktop manager, remember that you can in the first phase have it connected without battery, when second phase commence (reconnecting to JVM) you insert battery, and it should be fully charged as well.

See if that helps.

Regards,

Celfixx Dubai

[Celfixx-Dubai]

@lucky121

You can try out out the script I've made here and let me know if that might solve your issue.

Regards,

Celfixx Dubai

[lucky121]

Originally Posted by Celfixx-Dubai

@lucky121

What was the state of the device previously?

1: Was it only red light blinking?
2: Did it show LOGO "before" you tried NUKE and WIPE and then full OS via bootrom?

You can also now try to do the update via Desktop manager, remember that you can in the first phase have it connected without battery, when second phase commence (reconnecting to JVM) you insert battery, and it should be fully charged as well.

See if that helps.

Regards,

Celfixx Dubai

yess brother blackberry logo come then restart and blinking

[lucky121]

brother in middle usb not regconize ...

[cal_guy]

How is it blinking? There are blinking error codes. Post you code here. For example like 10111

[R.Nasir.Ali]

blinking red light solution for all blackberry

1. download blackberry master control program and install it
2. download CFP_3.9.0.175.exe keep on desktop
3. open master control program and click on setting wheel on left hand side and
in enable protected control type BrickBerry same as it is here
4. right click on alien face cfp button at left hand side.
5. below in cfp option (rim command-line program (cfp) executable ) select the cfp which you copied on desktop.
6. connect your bb without battery on top command-line interface (CLI)
select wipe tick mark the empty box next to execute and press execute it will take 10 to 12 minutes after it finish disconnect your bb install a battery and wait for few minutes let the phone do its job.
let the bb master control be open..........



now the trick is to load os

1. In bb master control on right hand side below right click on apploader
it will loader/nojvm connect your phone follow the instruction thats it you have done the job..

please write me if you have any doubt or error

thanks

nasir


first you do this all later while loading when it says apploading error dont press cancel just disconnect bb phone remove the battery and re insert the battery wait few secound when phone is finish connect your phone and press retry
again if it says some error then go to step 6 and select nuke then again wipe

and load you will be done

regards

nasir