:::Post here your problem....I will try to solve your problem in 24 hours:::

[hasbullahar]

Originally Posted by Darmack

thanks sir .........the software is asking for the device password not the password to open the software.....the installer can not continue despite that i put the device correct password please help thanks in advance

no need password friend u press ok then showing bb sak handset must must be open home screen

[hasbullahar]

Originally Posted by DemnZ

Hi , newaz1991
Do you have solution for no network on 9900 ? When network switched On , phone thinking some seconds and then turn it off again .

Thanks and regards

friend you will check the hand set is some short the bord no shorted you can ripair bb sak

[hasbullahar]

Originally Posted by newaz1991

BESt regards friends ..................
post here your all problem about your any Blackberry Models
In Sha Allah I will try to solve your problem in just 24 hours.............

hii friend i was ask you my 9900 no power solution but u not responced my post what happend now 3 days a go thank you

[Hornet2006]

Hi, All
I try load new VSM file to BB 9630, but I do not have solution.
First of all
1. Upload Factory OS from that post http://forum.gsmhosting.com/vbb/f489...odels-1677458/
2. Now I have a "no application linked" in phone.
3. I start MFI connect phone
4. I find MFI 2.0.1.3 press ctr+alt+shift+f12 and I can not press button Load VSM
When I press Connect USB MFI is close.
How can I load VSM file through MFI?
Were are I can find right Configuration.XML file for my BB 9630?
Please help me friend!!!

[elro0t]

I need to change my BB 9300 IMEI and PIN, how can i do it? Can u help me?

[nazeemlabs]

blackberry 9900 built in memmory repair error always showing before then i updated software 7.1.0. after the mobile blackberry loading screen 75% then stuck many times i tired nuke,wipe 507,ultra erase,erase all,reset factory ,downgrade software 7.0.0.540 ,etc..... but still same help me ihave 2 9900 bold have like this problem

[Hacker3gsm]

hye all ..

BB 9860 after repaire red plink phone not work with sim card...restart when put sim...
without sim when it see me aoutomatic update date and time and press ok phone do restart ...
plz help me
snx

BR

[hasbullahar]

Originally Posted by nazeemlabs

blackberry 9900 built in memmory repair error always showing before then i updated software 7.1.0. after the mobile blackberry loading screen 75% then stuck many times i tired nuke,wipe 507,ultra erase,erase all,reset factory ,downgrade software 7.0.0.540 ,etc..... but still same help me ihave 2 9900 bold have like this problem

dear friend first u erase bb cleaner then u will flash mfi file your screen is showing upload factory os in white back ground then u will flash factory os eny version its sure 100% working

[hasbullahar]

Originally Posted by Hacker3gsm

hye all ..

BB 9860 after repaire red plink phone not work with sim card...restart when put sim...
without sim when it see me aoutomatic update date and time and press ok phone do restart ...
plz help me
snx

BR

friend you can ripair this problem for bbsak hand set is open the home screen connect bb sak you do readcode then erase code

[topeak]

i need to use chinatelcom's sim card on verzion 9930,what should i do,unlock or debrand or both ?

Sent from my ZTE N880E using Tapatalk 4 Beta

[newaz1991]

Originally Posted by Hacker3gsm

hye all ..

BB 9860 after repaire red plink phone not work with sim card...restart when put sim...
without sim when it see me aoutomatic update date and time and press ok phone do restart ...
plz help me
snx

BR

try to reset with BB sack if not check your front keypad-mouse flex

[newaz1991]

Originally Posted by hasbullahar

hii friend i was ask you my 9900 no power solution but u not responced my post what happend now 3 days a go thank you

pls hit the power ic. i already tested same like this problem. and its now working well

[hasbullahar]

Originally Posted by newaz1991

pls hit the power ic. i already tested same like this problem. and its now working well

ok thank you friend its not common fault power iconly 5% is success

[newaz1991]

Originally Posted by topeak

i need to use chinatelcom's sim card on verzion 9930,what should i do,unlock or debrand or both ?

Sent from my ZTE N880E using Tapatalk 4 Beta

is your phone already unlocked ya not?
or if you put chaina telecoms sim whats showing in the display?

[abdallah47]

salaam i was wondering if u can help me with my bb 9300 curve when installing OS using app loader i get stuck at connecting to boot ROM can u help me plz