Repair RED BLINK , EFS CORRUPT on QUALCOM , BB OS 7.0 n 7.1

[gitamilana]

Originally Posted by jointaccess

Mr wawan tato
please guide step by step on how to do in English language

9900 red light and imei was fixed, the 9900 is working ok, but when i select 3g network it will show only edge in capital letter like this,,,,EDGE,,,

please help to solve this problem.

maybe you must write on correct NV ..
Forward Message

use nvtool, use read command to make nv file according to your vsm brand and write to your device

[jointaccess]

Mr gitamilana
please can you help me with the nvtool and guide me on how to read command to make nv file according to my vsm brand and write to my device,
i don't know how to it.

Thanks.

[gitamilana]

USE THIS NV_TOOL

first plug your good device check highest blackberry com port at computer device manager click connect, after conected click read wait until finished then write that file to your error device

[nessyb]

Originally Posted by winston876

hi guys i have a bb 9900 tmobile . it was loading 75% however i fixed it,now its not picking up any signal whatsoever am in jamaica and my operator is digicel. need some help please. i only see sos on the signal bar

You need to unlock the phone maybe it was network locked or check to see if the imei has not corrupted during tge flashing proccess...if failed maybe check its hardware prob

[jointaccess]

Mr gitamilana please i took a reading from a working 9900 and write back on the 9900 that has EDGE, but still same, any other way?
see log below

Reading NV-items, in range of: 00000 (0x0000) - 65535 (0xFFFF)
Done.

Writing NV-items from a file:
Unsuccessfully written NV-items:
00000 (0x0000) - Read only item
00001 (0x0001) - Read only item
00005 (0x0005) - SPC (6 digits) is required
00020 (0x0014) - SPC (6 digits) is required
00021 (0x0015) - SPC (6 digits) is required
00024 (0x0018) - SPC (6 digits) is required
00032 (0x0020) - SPC (6 digits) is required
00033 (0x0021) - SPC (6 digits) is required
00034 (0x0022) - SPC (6 digits) is required
00035 (0x0023) - SPC (6 digits) is required
00036 (0x0024) - SPC (6 digits) is required
00037 (0x0025) - SPC (6 digits) is required
00039 (0x0027) - SPC (6 digits) is required
00176 (0x00B0) - SPC (6 digits) is required
00177 (0x00B1) - SPC (6 digits) is required
00178 (0x00B2) - SPC (6 digits) is required
00209 (0x00D1) - SPC (6 digits) is required
00215 (0x00D7) - SPC (6 digits) is required
00259 (0x0103) - SPC (6 digits) is required
00550 (0x0226) - Command failed
00855 (0x0357) - SPC (6 digits) is required
05597 (0x15DD) - Read only item
Done.

[gitamilana]

Is your source file from the same TYPE AND brand? Tmobile to tmobile etc

[sundeep21]

Hi all, i need support for my blackberry bold 9900, it has a unique problem, it works perfectly fine until it is in offline mode but as soon as i turn off the offline mode it starts restarting. please help as i have tried reloading the software but got no success.

please help!!

thanks

[mark_unlocker]

could this work on blackberry 9650 ?
please help! !
thanks in advanced

[jointaccess]

Thanks greatly Mr gitamilana for your prompt reply.
please my the blackberry 9900 I took the reading is unbranded and the one that has problem is unbranded too. it displays Blackberry original, while booting only

[mark_unlocker]

could this work on blackberry 9650 corrupt imei?
please help! !
thanks in advanced

[hector bermudez]

Hello i need good backup NVM 9900 my phone is from ATYT

[gitamilana]

Originally Posted by jointaccess

thanks greatly mr gitamilana for your prompt reply.
Please my the blackberry 9900 i took the reading is unbranded and the one that has problem is unbranded too. It displays blackberry original, while booting only

i think your device is rim prototype, if your mentioned before, only dongle can solve your problem, just click rebuild qcfs, but since your write file from another device, iam not sure anymore

[ansari123]

i accidentally press red blink button and my bb 9900 IMIE won't show while i use this code *#06#


i can't on Mobile Network plz help me

my phone was working fine before use this

[way2unlock]

@ ansari123

use this software

phone need switch on connect & repair

Share Free Imei

[jolucaex]

Originally Posted by jointaccess

Mr gitamilana please i took a reading from a working 9900 and write back on the 9900 that has EDGE, but still same, any other way?
see log below

Reading NV-items, in range of: 00000 (0x0000) - 65535 (0xFFFF)
Done.

Writing NV-items from a file:
Unsuccessfully written NV-items:
00000 (0x0000) - Read only item
00001 (0x0001) - Read only item
00005 (0x0005) - SPC (6 digits) is required
00020 (0x0014) - SPC (6 digits) is required
00021 (0x0015) - SPC (6 digits) is required
00024 (0x0018) - SPC (6 digits) is required
00032 (0x0020) - SPC (6 digits) is required
00033 (0x0021) - SPC (6 digits) is required
00034 (0x0022) - SPC (6 digits) is required
00035 (0x0023) - SPC (6 digits) is required
00036 (0x0024) - SPC (6 digits) is required
00037 (0x0025) - SPC (6 digits) is required
00039 (0x0027) - SPC (6 digits) is required
00176 (0x00B0) - SPC (6 digits) is required
00177 (0x00B1) - SPC (6 digits) is required
00178 (0x00B2) - SPC (6 digits) is required
00209 (0x00D1) - SPC (6 digits) is required
00215 (0x00D7) - SPC (6 digits) is required
00259 (0x0103) - SPC (6 digits) is required
00550 (0x0226) - Command failed
00855 (0x0357) - SPC (6 digits) is required
05597 (0x15DD) - Read only item
Done.

conect in normal mode or factory os mode (nal) ????? i9 have tow 9810 in sos