Why 8320 can't be upgrade? - GSM-Forum

gartbox · 01-18-2009, 06:06

Hi all,
I have a curve 8320 with firmware 4.2 that can't be upgrade to 4.5 firmware, (always nuked when I'm tryng to upgrade).
Need your help how to forcing this one.

Reason: doctogo can't run on 4.2

Thanks for advance.

jakoy · 01-18-2009, 06:11

try use anything you want sir...

gartbox · 01-18-2009, 11:27

Thanks, but I have been trying with many firmware 4.5 (with no vendor.xml), still fail., device just can be upload with 4.2 firmware., In other curve 8320..there is no problem for upgrading.

BCcommunication · 01-18-2009, 13:47

flash without bettery search forum 8310 proces same 8320

BCcommunication · 01-18-2009, 13:57

http://forum.gsmhosting.com/vbb/show...lackberry+8310

BCcommunication · 01-18-2009, 13:58

its tested 100000000000%

gartbox · 01-19-2009, 05:29

I have been tried with some metode/trick as your recommended links.
still got "Catastrophic assertion failure" show on my screen.

shohag · 01-19-2009, 05:38

delete vendor.xml file first then try again.............
work 100% bro..................

jap_line · 01-19-2009, 06:18

use apploader inside

program files/common files/research in motion/apploader

connect your blackberry to pc without battery
and when it say usb_unknown quickly press next
and wait until your blackberry finish restoring/updating OS..

tested by me many times for nuked/bricked blackberry..

because in this method,
connecting to bootrom and java will be bypassed..

rg

gartbox · 01-20-2009, 02:01

many thanks for quick respons,

- vendor.xml deleted.
- mfi full erase.
- use loader /nojvm command tried with and without battery , standard DM upgrade etc.
- tried with more than 1 pc/notebook
- 99% upgrading firmware without problem (I have done with many & type bb)
but I still got a problem with this one, as note item works normally when use firmware 4.2 , firmware 4.5 can't do.
several guys says to me, there are some type/item yg can not be upgrade, is that issue right?

m3x · 01-20-2009, 23:35

hi there gartbox
I have the same issue with u...
got 8320 curve with OS 4.2.2.181 and need to upgrade to 4.5++ with no luck!
since the first time I tried to upgrade, it stops on device initialization
then the bb just showing blank screen and LED keeps on and off every 3-5 secs
then I finally downgrade it back to 4.2.2 and it works like a charm (so glad that I didnt brick my bb)
then I found out on Status screen shows IT Policy Enabled when typed BUYR
but when I checked the General Security settings, there's no IT Policy there

I have been trying many and many methods outthere but none have fixed my problem...
I'm suspecting that this IT Policy enabled mode is preventing me to upgrade to 4.5
I've tried the policy.bin solution etc but no luck (since JLwiping can be used only for 4.3++)

Do you have the same issue here?
Hope anyone can help us on this...
thanks!

gartbox · 01-22-2009, 00:08

yes, same condition .. IT policy enabled ..

rudyab · 02-04-2009, 19:45

I've got this problem also.
This is the hardest problem that I have ever seen.
Till now.. no solution yet.

xenusean · 04-20-2009, 15:58

Hi guys,

I have same problem.
"Catastrophic assertion failure" --> then "Unable to reconnect to the device during a multi-stage load operation."
`-------> using without batt method

Still don't have any solution?

Please anyone help us

hellocommunicat · 06-30-2009, 04:36

any solution yet, have the same 'catastrophic assertion problem'

01-18-2009, 06:06	#1 (permalink)
gartbox Junior Member Join Date: Apr 2007 Posts: 13 Member: 488229 Status: Offline Thanks Meter: 0	Why 8320 can't be upgrade? Hi all, I have a curve 8320 with firmware 4.2 that can't be upgrade to 4.5 firmware, (always nuked when I'm tryng to upgrade). Need your help how to forcing this one. Reason: doctogo can't run on 4.2 Thanks for advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
so..iphone with 2.2.1 can't be upgrade to 3.0 to unlock anymore?	Cake	iPhone 2 / iPhone 3G / iPhone 3GS	9	09-15-2009 07:02
ERROR - Bad data in dongle, this dongle can't be upgraded!	nonu_don	Easy-Unlocker	1	12-05-2008 11:54
ERROR - Bad data in dongle, this dongle can't be upgraded!	trycktill	Easy-Unlocker	0	12-03-2008 04:34
why THx can't be flashed ????	chavrotti	VygisToolbox	1	09-28-2005 19:45

01-18-2009, 06:11	#2 (permalink)
jakoy No Life Poster Join Date: Aug 2002 Location: Island Garden City Of Samal,Ph Posts: 1,971 Member: 14852 Status: Offline Sonork: 100.1608716 Thanks Meter: 503	try use anything you want sir...

01-18-2009, 11:27	#3 (permalink)
gartbox Junior Member Join Date: Apr 2007 Posts: 13 Member: 488229 Status: Offline Thanks Meter: 0	Thanks, but I have been trying with many firmware 4.5 (with no vendor.xml), still fail., device just can be upload with 4.2 firmware., In other curve 8320..there is no problem for upgrading.

01-18-2009, 13:47	#4 (permalink)
BCcommunication No Life Poster Join Date: Aug 2004 Location: Pakistan < Karachi Age: 41 Posts: 1,000 Member: 76456 Status: Offline Sonork: 100.1678368 Thanks Meter: 60	flash without bettery search forum 8310 proces same 8320

01-18-2009, 13:57	#5 (permalink)
BCcommunication No Life Poster Join Date: Aug 2004 Location: Pakistan < Karachi Age: 41 Posts: 1,000 Member: 76456 Status: Offline Sonork: 100.1678368 Thanks Meter: 60	http://forum.gsmhosting.com/vbb/show...lackberry+8310

01-18-2009, 13:58	#6 (permalink)
BCcommunication No Life Poster Join Date: Aug 2004 Location: Pakistan < Karachi Age: 41 Posts: 1,000 Member: 76456 Status: Offline Sonork: 100.1678368 Thanks Meter: 60	its tested 100000000000%

01-19-2009, 05:29	#7 (permalink)
gartbox Junior Member Join Date: Apr 2007 Posts: 13 Member: 488229 Status: Offline Thanks Meter: 0	I have been tried with some metode/trick as your recommended links. still got "Catastrophic assertion failure" show on my screen.

01-19-2009, 05:38	#8 (permalink)
shohag No Life Poster Join Date: May 2005 Location: CellcomEngineering Age: 42 Posts: 1,335 Member: 147116 Status: Offline Sonork: 100.1578260 Thanks Meter: 316	delete vendor.xml file first then try again............. work 100% bro..................

01-19-2009, 06:18	#9 (permalink)
jap_line No Life Poster Join Date: Apr 2008 Location: Philippines Age: 36 Posts: 577 Member: 758106 Status: Offline Sonork: jap_line Thanks Meter: 412	use apploader inside program files/common files/research in motion/apploader connect your blackberry to pc without battery and when it say usb_unknown quickly press next and wait until your blackberry finish restoring/updating OS.. tested by me many times for nuked/bricked blackberry.. because in this method, connecting to bootrom and java will be bypassed.. rg

01-20-2009, 02:01	#10 (permalink)
gartbox Junior Member Join Date: Apr 2007 Posts: 13 Member: 488229 Status: Offline Thanks Meter: 0	many thanks for quick respons, - vendor.xml deleted. - mfi full erase. - use loader /nojvm command tried with and without battery , standard DM upgrade etc. - tried with more than 1 pc/notebook - 99% upgrading firmware without problem (I have done with many & type bb) but I still got a problem with this one, as note item works normally when use firmware 4.2 , firmware 4.5 can't do. several guys says to me, there are some type/item yg can not be upgrade, is that issue right?

01-20-2009, 23:35	#11 (permalink)
m3x Junior Member Join Date: Jan 2009 Posts: 1 Member: 947476 Status: Offline Thanks Meter: 1	hi there gartbox I have the same issue with u... got 8320 curve with OS 4.2.2.181 and need to upgrade to 4.5++ with no luck! since the first time I tried to upgrade, it stops on device initialization then the bb just showing blank screen and LED keeps on and off every 3-5 secs then I finally downgrade it back to 4.2.2 and it works like a charm (so glad that I didnt brick my bb) then I found out on Status screen shows IT Policy Enabled when typed BUYR but when I checked the General Security settings, there's no IT Policy there I have been trying many and many methods outthere but none have fixed my problem... I'm suspecting that this IT Policy enabled mode is preventing me to upgrade to 4.5 I've tried the policy.bin solution etc but no luck (since JLwiping can be used only for 4.3++) Do you have the same issue here? Hope anyone can help us on this... thanks!

01-22-2009, 00:08	#12 (permalink)
gartbox Junior Member Join Date: Apr 2007 Posts: 13 Member: 488229 Status: Offline Thanks Meter: 0	yes, same condition .. IT policy enabled ..

02-04-2009, 19:45	#13 (permalink)
rudyab Freak Poster Join Date: Sep 2004 Age: 54 Posts: 129 Member: 81291 Status: Offline Thanks Meter: 4	I've got this problem also. This is the hardest problem that I have ever seen. Till now.. no solution yet.

04-20-2009, 15:58	#14 (permalink)
xenusean Junior Member Join Date: Mar 2009 Posts: 5 Member: 997749 Status: Offline Thanks Meter: 0	Hi guys, I have same problem. "Catastrophic assertion failure" --> then "Unable to reconnect to the device during a multi-stage load operation." `-------> using without batt method Still don't have any solution? Please anyone help us

06-30-2009, 04:36	#15 (permalink)
hellocommunicat Major Poster Join Date: Jul 2008 Location: trinidad Posts: 46 Member: 826446 Status: Offline Thanks Meter: 0	any solution yet, have the same 'catastrophic assertion problem'