two psp (2004 & 2006) bricked need solution!!

[llcoolr]

i' made a pandora battery like this way and when i insert it the psp auto start (green led on) wich mean that the batt is ok



now i used Rain's SImple MMS Maker by Rainmotorsports

Starting Format
Format Complete
Starting IPL Injection
IPL Injected
Creating Folders
Folders Created
Extracting Despertar del Cementerio v7
Finished Extraction
Reading 4.01 EBOOT
Writing 401.PBP
401.pbp Copied

Finished Making MMS

but it's not working !!!!!!!!!!!

[samibapy]

hello,
Did u check ur mb before bricked ?
Is it was ta-088v3
Did u try with different memory stick ?

[llcoolr]

now i made magic stck and pandora and i have tested it on an other Fat Psp and its working but in this two units nothig happend

when i place normal battery and power it only green led is tuning on and thats all and not turning off (no blinkig) also no recovery menu possible

how it's possible to revive it

[llcoolr]

i dissassemble ths first one and here it is uploaded and i think it's v2 or v1 not v3
and according to this diagram it's hackable but HOW?

[llcoolr]

here is the second one

[samibapy]

I am relatively certain that this is a v3. Normally on a V3, you will see no reaction to a pandora .
Try pandora on it. If it works, and boots, it's fixable, if it doesn't it dead to the world.
If u still think u are running a v1 or v2, if this is the case, make sure you have installed DC7 on your stick, since it uses the newer kernel for creating the CFW. OR (most likely this one) you just need to press the screen button after you boot it up. Remember to hold the L trigger or whatever the boot key is, (a lot of the slims seem to load the service mode up slower, so you just have to hold the button for a while), then press the brightness key. If nothing happens, press X anyway. The orange light on the left side will start to blink like it's being written. Give those a try, and tell me what happens.

[samibapy]

Originally Posted by samibapy

I am relatively certain that this is a v3. Normally on a V3, you will see no reaction to a pandora .
Try pandora on it. If it works, and boots, it's fixable, if it doesn't it dead to the world.
If u still think u are running a v1 or v2, if this is the case, make sure you have installed DC7 on your stick, since it uses the newer kernel for creating the CFW. OR (most likely this one) you just need to press the screen button after you boot it up. Remember to hold the L trigger or whatever the boot key is, (a lot of the slims seem to load the service mode up slower, so you just have to hold the button for a while), then press the brightness key. If nothing happens, press X anyway. The orange light on the left side will start to blink like it's being written. Give those a try, and tell me what happens.

Remember this is my knowledge
But I m not the king

[zakiyyboss]

Originally Posted by llcoolr

here is the second one

Where you able to SOLVE your PROBLEM !!!!

[llcoolr]

no psp bricked............

i think no solution...

[seifhatem]

I bricked my PSP 3004 when i used CFW enabler
Sent it to sony service here in Egypt
They sai that it was problem while manufacturing and not from me and got a new one xD