MP4 Players ANYKA chip flashing

[gopalhot]

If this looks like your player, well i have founded. a solution

I extracted the firmware using nothing but my hands.
well lets go to repair your player.

VERY IMPORTANT: some features, like camera, radio will be or not disabled, TRY WHIT THE FIRMWARES PROVIDED FOR OPTIMAL RESULTS,
but remember its better than nothing.

this is what you need in order to repair, to extract see the note below:

* USB cable (named "USB Line" too).
* full charge batery of the player (minimum 10 mins. conected to the power supply )
* Download this firmware.
OR THIS THANKS to LONTU for provifde. (best font, CAMERA, NES games enabled).
and be prepared to do it.

let´s start!
Notice: first your player must be "turn OFF".
OK.

1. Enter the "BIOS"

Firsts Hold MENU and connect the USB cable to the computer and the player.

then release MENU and press "PLAY" quickly.

If you do it well you should see this.

ok then press "REWIND"(left <<|) and "MENU" and "|>>"(right).



you should see this

(NOTE: some versions should see "Pres MENU to format, pres other key to use USB disk, or , not format"


in any case you should format!

Be prepare to lose everything in the player.

OK, if you failed,repeat all procedures, we need this (see image), calm down and everything will be OK, this MP4 player is very related to a computer itself, for that reason its very secure upgrade firmware.




OK Windows will detect it, but one unit will have 16 Mb of storage space, well, copy the following files of the firmware:

AKresData.bin (controllers)
Magic.bin (O.S. itself)
other files are optional.

then Release the player in secure form, restart it, and if you´re lucky, your player will be alive again!

ENJOY!


/// ************************************************** *///
download

file 2
and any problem
[email protected]
+8801717004797

[alamsarvar]

thanks for nice posting

[..::AdnanRaj::..]

thank u verry much
sir if u have knowledge about hang and only light on solution for camera mp4
mp3 players waiting solution
thanks in advance

[coldGin]

Thank you it's a very usefull info.

hope to always have supporton this and firmwares to upload...

[loyunk]

thanks bro......................

[coldGin]

Reference for restore firmware of MP4 ANYKA Chip


MP4 iPOD Clone ANYKA Chip.

(iPod Video like Model )



If this looks like your player, well i have founded. a solution

I extracted the firmware using nothing but my hands.
well lets go to repair your player.

VERY IMPORTANT: some features, like camera, radio will be or not disabled, TRY WHIT THE FIRMWARES PROVIDED FOR OPTIMAL RESULTS,
but remember its better than nothing.

this is what you need in order to repair, to extract see the note below:

* USB cable (named "USB Line" too).
* full charge batery of the player (minimum 10 mins. conected to the power supply )
* Download this firmware.
OR THIS THANKS to LONTU for provifde. (best font, CAMERA, NES games enabled).
and be prepared to do it.

let´s start!
Notice: first your player must be "turn OFF".

OK.

1. Enter the "BIOS"

Firsts Hold MENU and connect the USB cable to the computer and the player.

then release MENU and press "PLAY" quickly.

If you do it well you should see this.



ok then press "REWIND"(left <<|) and "MENU" and "|>>"(right).

you should see this



(NOTE: some versions should see "Pres MENU to format, pres other key to use USB disk, or , not format"

in any case you should format!



Be prepare to lose everything in the player.

OK, if you failed,repeat all procedures, we need this (see image), calm down and everything will be OK, this MP4 player is very related to a computer itself, for that reason its very secure upgrade firmware.



OK Windows will detect it, but one unit will have 16 Mb of storage space, well, copy the following files of the firmware:

AKresData.bin (controllers)
Magic.bin (O.S. itself)
other files are optional.

then Release the player in secure form, restart it, and if you´re lucky, your player will be alive again!

ENJOY!

================================================== =======

New Model nGage like


CONFIRMED WORKS!

first you will need
* Fimwares for try compatibles whit this model
One
Two
Three (hight experimental)

* Battery charged its not needed for this model connect the USB cable and press UP, then jump to the step 5.
* USB cable
* Be very prepared for all.
Please use the reference images.
figure 1



figure 2


Ok try this
(Use the Images to reference)

1 Press UP and POWER ... wait a little.

2 Release UP, and POWER

3 Press DOWN (The screen maybe blink, be careful but don´t worry if the player restart, repeat the step 1)

4 Connect the USB Cable

5 press UP and the player will be Formatted automatically in FAT32.

6 Copy the new firmware. (try with all the firmwares.)

7 press RESET

8 Turn on and Hold the POWER button for 3 Seconds


FINAL NOTE:If you have a working player, please upload your fimware, we need it, for more compatibility

for extract the firmware, repeat the steps but DON´T FORMAT or your player will die, then if you do it well, copy the files mentioned and upload it!


thanks to the source from (www.mympxplayer.org)

edited for some pics missing.....

PLEASE UPload firmwares... it's for US

[kaosar_ataur]

My Dear Brother(Everybody), I have exactly the same player.After pressing the power button it turn on & show "loading". After this nothing happen. If I press the "Esc" button & connect it with pc by usb cable it shows new hardware found & want the driver file. I dont have it, so I cant connect it finally. Please help me to repair my player. I will be so greatfull to you.

[kaosar_ataur]

If anybody have the user manual & cd driver of MP4 Players ANYKA chip, please upload these here.

[kaosar_ataur]

Originally Posted by shamshad

thank u verry much
sir if u have knowledge about hang and only light on solution for camera mp4
mp3 players waiting solution
thanks in advance

My dear brother Shamshad, did you repair your Mp4 as instruction posted by brother gopalhot? If yes, please instruct me to repair my mp4.

[BADRODZ]

thank very very thank