[Archive] TomTom v9 Firmware and Maps

[BuMobiles]

Here is a complete Section for TomTom v9 Firmware and Maps
I hope you find it all useful

Please say thank you by using the button

[BuMobiles]

New NC v9.000, junk free:

http://www.2shared.com/file/8367725/...C90001637.html

This is a cabinet file made by hand, instead of the original TT one which is not available yet (probably the link is deliberately/ridiculously concealed though it should be in the public domain).

It is fully supported by dsa.exe; the recommended mode is x40.

(It saddens me to note that the CF card is still not supported by the kernel though this was not the case in the past - up until v8.370/v8.417 included).

Originally posted by DSA

[BuMobiles]

Here is a few new poi's as of the 12th October 2009
Please say thank you by using the button

Full List
Early_Churches.ov2
English_Lakes_Hotels.ov2
Dog_Racing.ov2
English_Welsh_scottish_Castles.ov2
Diy_Stores__UK.ov2
Enjoy_England_Villages.ov2
De_Vere_Hotels.ov2
Esso_Stations.ov2
Dart.ov2
Fartkamera_SE_TomTom.ov2
Fartsboks_NO_TomTom.ov2
Fish_And_Chip_Shops.ov2
DANGEROUS_NARROW_ROAD_SECTIONS.ov2
Flitspaal_NL_TomTom.ov2
Florists.ov2
Currys_Sub__United_Kingdom.ov2
Focus.ov2
Crown_Courts.ov2
Formule1_Sub__United_Kingdom.ov2
Cricket_Grounds.ov2
Gloria_Jean_s_Coffees_UK.ov2
Cotton_Traders.ov2
Gloria_*****_Coffees_UK.ov2
Costa_Coffee.ov2
Good_Pub.ov2
Computer_Stores.ov2
Great_Pubs_London.ov2
Comfort_Inn.ov2
Grocery_Store.ov2
Comet_Sub__United_Kingdom.ov2
Halfords_Sub__United_Kingdom.ov2
Coffee.ov2
Halifax_Bank_Uk.ov2
Clydesdale_Bank_Uk.ov2
Harry_Ramsdens.ov2
Closed_Railway_Locations.ov2
Herbs_And_Spices.ov2
Cinemas.ov2
Hilton_UK_Hotels.ov2
Center_Parcs_Uk.ov2
Holiday_Inn_Express.ov2
Castles__UK.ov2
Homebase_Sub__United_Kingdom.ov2
B_And_Q_Sub__United_Kingdom.ov2
horseracing_courses.ov2
Caravan_Site.ov2
Iceland_Freezer_Stores_Uk.ov2
Caravan_Club_Sites.ov2
Industrial_estates.ov2
Caravan_Club_CL_sites.ov2
J_D_Wetherspoon.ov2
Caravan_and_camping_club_sites.ov2
Jet.ov2
Caravan_and_camping_club_CS_site.ov2
Shell_Petrol_Stations_Sub__Europe.ov2
Car_Repair.ov2
Weight_Limit_For_Truckers.ov2
Car_Parks_Uk_All__United_Kingdom.ov2
Width_Restriction_7.5.ov2
Car_Dealership.ov2
*****_Clubs_Orlando_Florida.ov2
All_UK_Heritage_Sites.ov2
Car_Boot_Sale.ov2
ANWB_fietsroutes.ov2
Canals.ov2
Attractions_and_Theme_Parks.ov2
Campsites.ov2
Camping_And_Caravanning_Club_Sites_Uk.ov2
Cash_Points_All__United_Kingdom.ov2
Camping_And_Caravan_Club_Certified_Sites_Uk.ov2
Golfcourses.ov2
Cafe_S.ov2
Premier_Inn.ov2
Cafe_Nero.ov2
T-Mobile_HotSpot_UK.ov2
BUS_STATIONS_UK.ov2
Walmart_Supercenters.ov2
6_M_Repeater.ov2
Bus_stations.ov2
15Ft_0In_Truck_Cab_Height.ov2
Builders_Merchant.ov2
70_Cm_Repeaters.ov2
Bridges.ov2
Abbey_Atm.ov2
Brewers_Fayre.ov2
ABSWMW.ov2
Bp_Petrol_Stations_Sub__United_Kingdom.ov2
*****_Club.ov2
BP_Petrol_Stations.ov2
American_Golf_Discount.ov2
Bp_Garages.ov2
Amn_Low_Bridge_100.ov2
Boot_Sales.ov2
Angling_And_Sports_Fishing.ov2
Blitzer_DE_TomTom.ov2
Appart_City.ov2
Blitzer_AT_TomTom.ov2
Argos_Uk_Stores.ov2
Barclays_UK.ov2
Asda_Sub__United_Kingdom.ov2
BandQ_Stores_UK.ov2
Autoglass.ov2
English_Heritage.ov2
Autovelox_IT_TomTom.ov2
B_And_Q.ov2
Blackspot.ov2

http://www.2shared.com/file/8392669/...ober_2009.html

Thanks
B.u Mobiles

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 12-10-09

http://www.2shared.com/file/8393843/..._12-10-09.html

Courtesy of The Maverick

Just a quick tip: the .ver files are not needed to enable the use of the speed cams Thanks to Tendriver.

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Canada, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden, UK & USA.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Keygen).
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PLEASE NOTE: These Camera Files are NOT like normal POI's, for more information on this and also to check to see if your camera's work, check this post: http://forum.gsmhosting.com/vbb/show...postcount=3348

PS. There are many new patching tools now to choose from that are very easy to use that you can find on this thread.

Enjoy & Please show your Appreciation!!!

Mo.

[SIRHOWIE]

Hi version 9 loads but i can not get it to activate with easytools I have used tomtoms clear_ flash as well still no activations ive tried all versions of uk 8.35 maps incase it was a version issue any ideas
Sir Howie

[msubedar]

Originally Posted by SIRHOWIE

Hi version 9 loads but i can not get it to activate with easytools I have used tomtoms clear_ flash as well still no activations ive tried all versions of uk 8.35 maps incase it was a version issue any ideas
Sir Howie

If you have not already, try putting in a Patched ttsystem file, should do the trick if all else has been done correctly.

Mo.

[mathiaskt]

Originally Posted by dsa8310

Link to dsa-all.12October09.zip:

http://www.2shared.com/file/8401756/...October09.html

New: an improved algorithm in the automatic memory savings area.

I strongly recommend to all to reinstall their NC (rerun dsa.exe taking care to redo the patching from scratch, that is to erase first the corresponding dsa_navcore.xxxx.zip old package - it's next to the source TT CAB file) and also erase the folder xxxx on their device main storage, where xxxx is equal to the NC version number, e.g. for NC v9.000, xxxx will be 9000 (no dot).

I installed NC9000 on my TT720 and it does not boot anymore. Since I installed on top of NC560, I am going to delete everything and resinstall again. Below is what I saw:

Processing NC9.000.1637.cab, please wait...

patching file etc/rc
Hunk #1 succeeded at 39 (offset 4 lines).
Hunk #2 succeeded at 58 (offset 4 lines).
Hunk #3 succeeded at 65 with fuzz 2 (offset 4 lines).
Hunk #4 succeeded at 324 (offset 8 lines).
Hunk #5 succeeded at 678 (offset 39 lines).
Hunk #6 succeeded at 724 with fuzz 2 (offset 46 lines).
Hunk #7 succeeded at 798 with fuzz 2 (offset 46 lines).
Hunk #8 FAILED at 806.
Hunk #9 succeeded at 829 (offset 51 lines).
1 out of 9 hunks FAILED -- saving rejects to file etc/rc.rej
Patching PNDNavigator...

-rw-r--r-- 1 mathiask mkpasswd 23M Oct 13 10:58 /cygdrive/e/TT stuffs/dsa_navcor
e.9000-CF.zip

Are you sure you want to install on drive F? yes

Installing on drive F, please wait.
Extracting NC9.000.1637.cab... done.
Unzipping dsa_navcore.9000-CF.zip... done.

Press Enter to continue...

Mathias,

[mathiaskt]

Originally Posted by mathiaskt

I installed NC9000 on my TT720 and it does not boot anymore. Since I installed on top of NC560, I am going to delete everything and resinstall again. Below is what I saw:

Processing NC9.000.1637.cab, please wait...

patching file etc/rc
Hunk #1 succeeded at 39 (offset 4 lines).
Hunk #2 succeeded at 58 (offset 4 lines).
Hunk #3 succeeded at 65 with fuzz 2 (offset 4 lines).
Hunk #4 succeeded at 324 (offset 8 lines).
Hunk #5 succeeded at 678 (offset 39 lines).
Hunk #6 succeeded at 724 with fuzz 2 (offset 46 lines).
Hunk #7 succeeded at 798 with fuzz 2 (offset 46 lines).
Hunk #8 FAILED at 806.
Hunk #9 succeeded at 829 (offset 51 lines).
1 out of 9 hunks FAILED -- saving rejects to file etc/rc.rej
Patching PNDNavigator...

-rw-r--r-- 1 mathiask mkpasswd 23M Oct 13 10:58 /cygdrive/e/TT stuffs/dsa_navcor
e.9000-CF.zip

Are you sure you want to install on drive F? yes

Installing on drive F, please wait.
Extracting NC9.000.1637.cab... done.
Unzipping dsa_navcore.9000-CF.zip... done.

Press Enter to continue...

Mathias,

I did wipe it down and reinstaled but getting the same thing. Will leave it for at least 30mins and see if it makes any change. below is what I see:

Processing NC9.000.1637.cab, please wait...

patching file etc/rc
Hunk #1 succeeded at 39 (offset 4 lines).
Hunk #2 succeeded at 58 (offset 4 lines).
Hunk #3 succeeded at 65 with fuzz 2 (offset 4 lines).
Hunk #4 succeeded at 324 (offset 8 lines).
Hunk #5 succeeded at 678 (offset 39 lines).
Hunk #6 succeeded at 724 with fuzz 2 (offset 46 lines).
Hunk #7 succeeded at 798 with fuzz 2 (offset 46 lines).
Hunk #8 FAILED at 806.
Hunk #9 succeeded at 829 (offset 51 lines).
1 out of 9 hunks FAILED -- saving rejects to file etc/rc.rej
Patching PNDNavigator...

-rw-r--r-- 1 local.mathiask mkpasswd 23M Oct 13 11:31 /cygdrive/e/TT stuffs/dsa_
navcore.9000-CF.zip

Are you sure you want to install on drive F? y
Please answer yes or no.

Are you sure you want to install on drive F? yes

Installing on drive F, please wait.
Extracting NC9.000.1637.cab... done.
Unzipping dsa_navcore.9000-CF.zip... done.

Press Enter to continue...

[calendrier]

please, can you tell me what tomtom 9
for I have found no information on it
thank you

[mathiaskt]

Originally Posted by dsa8310

@mathiaskt:

Actually, the CF option, even if selected, it won't produce any effects on a go 720 or on any device unless it has an HDD.
(but re-patch without it anyway - and for the future)

So, you might still be in trouble... bootloader trouble?!

I always use the CF option but will stop from now on. I did put back 8560 and it still does not work. The version I read is 5.5257 - should I change it to 5.5258 and run patch?

Mathias,

[mathiaskt]

Originally Posted by mathiaskt

I always use the CF option but will stop from now on. I did put back 8560 and it still does not work. The version I read is 5.5257 - should I change it to 5.5258 and run patch?

Mathias,

This is very strange. The file bootloaderversion.txt has 5.5229 but system has 5.5257

[dsa8310]

Originally Posted by mathiaskt

I always use the CF option but will stop from now on. I did put back 8560 and it still does not work. The version I read is 5.5257 - should I change it to 5.5258 and run patch?

Mathias,

NO, the version automatically displayed by dsa.exe is already increased by 1.
5.5257 is the next version to be used (NOT 5.5258, it's pointless to increase by 2 when 1 will suffice).

Follow the steps in the post above. Use the "system" file from cabinet v8.560 or even an earlier one, from cabinet v8.370.

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

==================
Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_Premium 3236
Safety_Cam_CZ_Premium 3237
Safety_Cam_DK_Premium 3238
Safety_Cam_ES_Premium 3239
Safety_Cam_FI_Premium 3240
Safety_Cam_HU_Premium 3242
Safety_Cam_IT_Premium 3244
Safety_Cam_NO_Premium 3247
Safety_Cam_PL_Premium 3248
Safety_Cam_SE_Premium 3249
Safety_Cam_PT_Premium 3251
Safety_Cam_NL_Premium 3631
Safety_Cam_FR_Premium 3632
Safety_Cam_DE_Premium 3633
Safety_Cam_UK_Premium 3634
Safety_Cam_NL_Premium 3720
Safety_Cam_FR_Premium 3721
Safety_Cam_DE_Premium 3722
Safety_Cam_AT_TomTom 3725
Safety_Cam_BE_TomTom 3726
Safety_Cam_DE_TomTom 3727
Safety_Cam_ES_TomTom 3728
Safety_Cam_FI_TomTom 3729
Safety_Cam_FR_TomTom 3730
Safety_Cam_UK_TomTom 3731
Safety_Cam_IT_TomTom 3732
Safety_Cam_NL_TomTom 3733
Safety_Cam_NO_TomTom 3734
Safety_Cam_PT_TomTom 3735
Safety_Cam_SE_TomTom 3736
Safety_Cam_PL_TomTom 3737
Safety_Cam_CZ_TomTom 3738
Safety_Cam_ZA_TomTom 3739
Safety_Cam_AU_TomTom 3740
Safety_Cam_BR_TomTom 3741
Safety_Cam_US_Canada_TomTom 3742
=========================

download:

http://rapidshare.com/files/292585134/13.10.09.rar

Ok, so which sets can you use with which maps? This should help some peoples who's geography lessons were over their heads. It is not exclusive and was done at a point when not all maps existed, so no apology is made for inaccuracies or incompleteness. If you object to my sense of humour, tough. It is me, pay for the cams yourself and stop winging if I upset you.

Blitzer_AT_TomTom = Safety_Cam_AT_TomTom = Austria
Radar_BE_TomTom = Safety_Cam_BE_TomTom = Belgium
Blitzer_DE_TomTom = Safety_Cam_DE_TomTom = Germany
Radar_ES_TomTom = Safety_Cam_ES_TomTom = Spain
Kamerat_FI_TomTom = Safety_Cam_FI_TomTom = Finland
Radar_FR_TomTom = Safety_Cam_FR_TomTom = France
Safety_Cam_UK_TomTom = Safety_Cam_UK_TomTom = UK
Autovelox_IT_TomTom = Safety_Cam_IT_TomTom = Italy (Italia)
Flitspaal_NL_TomTom = Safety_Cam_NL_TomTom = Holland (Netherlands)
Fartsboks_NO_TomTom = Safety_Cam_NO_TomTom = Norway
Radar_PT_TomTom = Safety_Cam_PT_TomTom = Portugal
Fartkamera_SE_TomTom = Safety_Cam_SE_TomTom = Sweden
Safety_Cam_PL_TomTom = Safety_Cam_PL_TomTom = Poland
Blitzer_CZ_TomTom = Safety_Cam_CZ_TomTom = Czech Republic
Safety_Cam_ZA_TomTom = Safety_Cam_ZA_TomTom = South Africa
Safety_Cam_AU_TomTom = Safety_Cam_AU_TomTom = Australia
Radar_BR_TomTom = Safety_Cam_BR_TomTom = Brazil
Safety_Cam_US_Canada_TomTom = Safety_Cam_US_Canada_TomTom = USA & Canada
Safety_Cam_NZ_TomTom = Safety_Cam_NZ_TomTom = New Zealand
Safety_Cam_NL_Premium = Safety_Cam_NL_Premium = Holland Premium
Safety_Cam_FR_Premium = Safety_Cam_FR_Premium = France Premium
Safety_Cam_DE_Premium = Safety_Cam_DE_Premium = Germany Premium
Safety_Cam_UK_Premium = Safety_Cam_UK_Premium = UK Premium



AT - DE_AT_CH, Central_and_Eastern_Europe, Western_Europe, Western_and_Central_Europe, DE_AT_CH and Eastern Europe, Europe, Central Europe
BE - Benelux, Western_Europe, Western_and_Central_Europe, Europe, Central Europe
DE - DE_AT_CH, Central_and_Eastern_Europe, Western_Europe, Western_and_Central_Europe, DE_AT_CH and Eastern Europe, Europe, Central Europe
ES - Spain, Iberia, Western_Europe, Western_and_Central_Europe, Europe
FI - Scandinavia, Western_Europe, Western_and_Central_Europe, Russia_Baltics_Finland, Europe
FR - France, Western_Europe, Western_and_Central_Europe, Southern_Europe, Europe, Central Europe
UK - United_Kingdom_and_Republic_of_Ireland, Western_Europe, Western_and_Central_Europe, Iberia, Europe
IT - Italy, Italia, Western_Europe, Western_and_Central_Europe, Southern_Europe, Central_and_Eastern_Europe, DE_AT_CH and Eastern Europe, Europe, Central Europe
NL - Benelux, Western_Europe, Western_and_Central_Europe, Europe, Central Europe
NO - Scandinavia, Western_Europe, Western_and_Central_Europe, Europe
PT - Iberia, Portugal, Western_Europe, Western_and_Central_Europe, Europe
SE - Scandinavia, Western_Europe, Western_and_Central_Europe, Europe
PL - Central_and_Eastern_Europe, Western_and_Central_Europe, DE_AT_CH and Eastern Europe, Eastern_Europe, Europe, Central Europe
CZ - Central_and_Eastern_Europe, Western_and_Central_Europe, DE_AT_CH and Eastern Europe, Eastern_Europe, Europe, Central Europe
ZA - Southern_Africa
AU - Australia
BR - Brazil
US_Canada - Northern_America, USA_and_Canada, US_-_Midwest_Region, US_-_Southeast_Region, US_-_Western_Region, USA_Canada_and_Mexico_P
NZ - New_Zealand

If the Premium files and standard ones are in the same directory, the premium ones will be deleted




=========================================
benbbs

KEYGEN

http://rapidshare.com/files/292585432/BENBBS_new_3.1f.rar

========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[dsa8310]

Link to dsa-all.13October09.zip:

http://www.2shared.com/file/8421364/...October09.html

New: a last touch to the memory saving algorithm that handles an unlikely case of storage shortage.

And, for convenience, in one place, my previously posted link to the new v9.000 NC cabinet file:

http://www.2shared.com/file/8367725/...C90001637.html

Together, the above links would set anyone to the road of v9 success!

[dsa8310]

@mathiaskt:

Judging from your info:

a) you had a working v8.560 nc of bl equal to 5.5229 on your external 8GB SD card.
b) you made a nc v9.000 installation on the 8GB card, but it does not boot; the new bl was flashed into the device.
c) however, the internal card (2GB) is still booting (the official nc) and there is a new bootloader 5.5256 on device.

If a+b+c are true, then the new bl 5.5256 (that came with nc v9.000) does not support 8GB cards.

Fortunately, you can go back to a bl supporting 8GB cards, with dsa.exe.
The recipe is in post #10.

(you may do an extra test first: back-up your internal card and install on it nc v9.000; it should boot from there)