GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > MRT - Mobile repair tool


 
 
LinkBack Thread Tools Display Modes
Old 06-21-2018, 12:59   #1 (permalink)
No Life Poster
 
maplegsm's Avatar
 
Join Date: Nov 2006
Location: Bulgaria/China
Age: 58
Posts: 4,312
Member: 391664
Status: Offline
Sonork: Python
Thanks Meter: 1,063
Meizu M3 Account Remove Problem


Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM17
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Connect to Service Fail,Please re-run the software and try again...
Fail
After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
 
Old 06-21-2018, 13:14   #2 (permalink)
No Life Poster
 
maplegsm's Avatar
 
Join Date: Nov 2006
Location: Bulgaria/China
Age: 58
Posts: 4,312
Member: 391664
Status: Offline
Sonork: Python
Thanks Meter: 1,063
Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM17
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003AB400000 -> 15028M
Flash ID: 0x90014A4841473461
Flash Name: Hynix_Unknow
Flash symbol: HAG4a2
>>> Swich Mobile to Hight Speed Re\Wr Port...


always stop here
how to solve the issue
 
Old 06-21-2018, 16:56   #3 (permalink)
No Life Poster
 
maplegsm's Avatar
 
Join Date: Nov 2006
Location: Bulgaria/China
Age: 58
Posts: 4,312
Member: 391664
Status: Offline
Sonork: Python
Thanks Meter: 1,063
Now Hang On Logo






Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM17
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003AB400000 -> 15028M
Flash ID: 0x90014A4841473461
Flash Name: Hynix_Unknow
Flash symbol: HAG4a2
>>> Reading Mobile Map Data...Success
>>>>Geting Mobile info data...
ADD(HEX):0x0023BC8000 Size(HEX):0x0000700000
>>>>Writeing Mobile info data...
This Phone Support CDMA
SN has Change to :BQ222DL7
SN has Change to :BQ222DL7
>>>>Formating Mobile USER Data...
ADD(HEX):0x00EB000000 Size(HEX):0x02BF3FBE00
Corresponding operation completed!!!
After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
 
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 12:01.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.13860 seconds with 8 queries

SEO by vBSEO