Meizu M3 mini M98 cant flash with MRT
 

hi, phone dead by wrong flash with SPFT. now no any flash tool start process it.
MRT 1.78 starting operation good but then freeze

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM65
>>> Device driver identification:
MTK USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x00000002A3E00000 -> 10814M
Flash ID: 0x150100513832334D
Flash Name: Samsung_Unknow
Flash symbol: Q823MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM66
>>> Device driver identification:
MediaTek DA USB VCOM Port
>>>>Flashing preloader Block data to Moblile Phone...
Start: 0x0000000000 Size: 0x000002B830
>>>>Flashing recovery Block data to Moblile Phone...
Start: 0x0000008000 Size: 0x0000BAC650
>>>>Flashing custom Block data to Moblile Phone...
Start: 0x0001588000 Size: 0x000DBEA2D4

here is stop and slowly flashing
very slow. full process can take 5-6 hours. but after it phone still dead.
i think is bug and mrt not flash. becouse i disconnected phone in half but % still continiue count )
who can make succes report flashing Meizu M3 ?

Try again bro maybe file is big