Meizu m5s - Page 2 - GSM-Forum

-=XAKER=- · 09-06-2018, 10:50

m5s empty folder,no firmware

-=XAKER=- · 09-06-2018, 11:07

CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
The Flash Hardware Info:GE6BMB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter... After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

2.58 not fix problem,CPU 6753V, but mrt say 6735

-=XAKER=- · 09-06-2018, 12:38

solution: open mrt folder C:\mrt_2.58_lastupdate\date\mtk\mz_init and replace m5s file with edit file.Download full flash M5S_Flyme_5.2.13.1G(mtk6753)and replace preloader_M1612.bin with my file.Open mrt software,m5s,write flash, and open scatt file.Write flash and phone power on

-=XAKER=- · 09-06-2018, 12:54

https://yadi.sk/d/w0QWe_tekANR_A

Olbar · 10-02-2018, 09:44

The same case.

Quote:

>>> Downloading Boot1 To Mobile Phone...Success
The Flash Hardware Info:JHAG4a
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter... After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

And nothing happens. Where can i find correct DA and preloader for new flash type?

renren · 10-16-2018, 13:38

Quote:

Originally Posted by -=XAKER=-

solution: open mrt folder C:\mrt_2.58_lastupdate\date\mtk\mz_init and replace m5s file with edit file.Download full flash M5S_Flyme_5.2.13.1G(mtk6753)and replace preloader_M1612.bin with my file.Open mrt software,m5s,write flash, and open scatt file.Write flash and phone power on

Code:

>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
    The Flash Hardware Info:GE6BMB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x00000003A3E00000 -> 14910M
    Flash     ID: 0x150100474536424D
    Flash   Name: Samsung_Unknow
    Flash symbol: GE6BMB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM9
>>> Device driver identification: 
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>> Analysis of mobile phone data...
>>>>Reading Mobile Org Info....
Success
>>>>Moving Mobile Info...

GOOD!!

rajeshda69 · 10-18-2018, 02:50

Quote:

Originally Posted by aseke

Can't flash meizu m5s . I think problem in your server. Please fix it .
Allready wrothttp://forum.gsmhosting.com/vbb/f492/mrt-key-mrt-dongle-new-update-2-52-qualcomm-vivo-oppo-xiaomi-release-2420373/index3.html#post13182840e here

Flash With Sp Flash Tool

alex5757 · 10-21-2018, 16:20

same problem with this phone.
Lies 4 bricks ((
FT firmware is not suitable

maxhomyak · 10-22-2018, 19:39

I have the same problem

mahmoodameen · 10-22-2018, 21:59

Wait for the blood from the team mrt

p4ndahp3 · 10-23-2018, 08:48

I have the firmware but I have not flashed yet.
If you want to try to pm me to receive the link

david191 · 04-01-2019, 13:11

Quote:

Originally Posted by -=XAKER=-

solution: open mrt folder C:\mrt_2.58_lastupdate\date\mtk\mz_init and replace m5s file with edit file.Download full flash M5S_Flyme_5.2.13.1G(mtk6753)and replace preloader_M1612.bin with my file.Open mrt software,m5s,write flash, and open scatt file.Write flash and phone power on

hi i have same problem,link not working, i need this edited file.can anyone share this file?

09-06-2018, 10:50	#16 (permalink)
-=XAKER=- Insane Poster Join Date: May 2007 Location: Ukraine Posts: 62 Member: 501106 Status: Offline Thanks Meter: 26	m5s empty folder,no firmware

09-06-2018, 11:07	#17 (permalink)
-=XAKER=- Insane Poster Join Date: May 2007 Location: Ukraine Posts: 62 Member: 501106 Status: Offline Thanks Meter: 26	CPU_NAME: MT6735 >>> Reading Mobile Hardware Info...Success HW_Inf: 8A00 SW_Inf: CA00 >>> Initialization Mobile ... >>> Sending Auth File To Mobile...Success >>>>Trying Connect to Service verification data... Success >>> Downloading Boot1 To Mobile Phone...Success The Flash Hardware Info:GE6BMB >>> Downloading Boot2 To Mobile Phone... >>> Initializationing Mobile Hardware Parameter... After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!! 2.58 not fix problem,CPU 6753V, but mrt say 6735

09-06-2018, 12:38	#18 (permalink)
-=XAKER=- Insane Poster Join Date: May 2007 Location: Ukraine Posts: 62 Member: 501106 Status: Offline Thanks Meter: 26	solution: open mrt folder C:\mrt_2.58_lastupdate\date\mtk\mz_init and replace m5s file with edit file.Download full flash M5S_Flyme_5.2.13.1G(mtk6753)and replace preloader_M1612.bin with my file.Open mrt software,m5s,write flash, and open scatt file.Write flash and phone power on

09-06-2018, 12:54	#19 (permalink)
-=XAKER=- Insane Poster Join Date: May 2007 Location: Ukraine Posts: 62 Member: 501106 Status: Offline Thanks Meter: 26	https://yadi.sk/d/w0QWe_tekANR_A

10-21-2018, 16:20	#23 (permalink)
alex5757 Junior Member Join Date: Sep 2018 Posts: 1 Member: 2863843 Status: Offline Thanks Meter: 0	same problem with this phone. Lies 4 bricks (( FT firmware is not suitable

10-22-2018, 19:39	#24 (permalink)
maxhomyak Crazy Poster Join Date: Nov 2010 Location: Ukraine Posts: 52 Member: 1452910 Status: Offline Thanks Meter: 11	I have the same problem

10-22-2018, 21:59	#25 (permalink)
mahmoodameen Freak Poster Join Date: Dec 2013 Location: turkey Posts: 128 Member: 2079655 Status: Offline Thanks Meter: 15	Wait for the blood from the team mrt

10-23-2018, 08:48	#26 (permalink)
p4ndahp3 Insane Poster Join Date: Mar 2017 Posts: 60 Member: 2697457 Status: Offline Thanks Meter: 14	I have the firmware but I have not flashed yet. If you want to try to pm me to receive the link