vivo x21 does not enter 9008 mode pattern unlock - GSM-Forum

luizwcell · 05-31-2018, 20:40

I connect the USB cable holding volume up and down and goes into fastboot mode and not in 9008 mode
If anyone has a tip, I'm grateful.

308981113 · 06-01-2018, 02:42

Please lower the mobile version of the card brush package and enter 9008 mode to unlock it

luizwcell · 06-01-2018, 15:26

Quote:

Originally Posted by 308981113

Please lower the mobile version of the card brush package and enter 9008 mode to unlock it

I did not understand the procedure, I'm sorry, where low, I downloaded the room, I downloaded the tools to flash the system but all input in mode 9008

CHANDARAKK · 06-02-2018, 01:09

Quote:

Originally Posted by luizwcell

I did not understand the procedure, I'm sorry, where low, I downloaded the room, I downloaded the tools to flash the system but all input in mode 9008

try testpoint method i hope it work

2111002640 · 06-03-2018, 14:49

use testpoint bro................

luizwcell · 06-03-2018, 22:28

I opened the device, I have a photo of the board but it was not possible to post an image because there were 10 posts, I could not identify the test point, no, who can request photos from the board

kinryo · 06-04-2018, 03:19

Quote:

Originally Posted by luizwcell

I opened the device, I have a photo of the board but it was not possible to post an image because there were 10 posts, I could not identify the test point, no, who can request photos from the board

Use any image upload site..there got many online free picture upload..after upload u will get d code..and post

luizwcell · 06-08-2018, 02:54

I can climb the image on the site, just can't put here because says that I have limitations posts to put links

luizwcell · 06-08-2018, 03:06

I can not find the test point on the board in any way, if anyone knows how to reinstall the room via sideload it also helps

luizwcell · 06-08-2018, 19:15

I was able to do recognize as Qualcomm HS-USB Diagnostics 900E, not time I give the command accuse Open Boot file fail, make sure you have select it !!!

DYNET · 06-08-2018, 20:15

Hello did you try VIVO V9 Pinout I think that both have same pinout you can send pm me your image link

luizwcell · 06-08-2018, 21:54

Quote:

Originally Posted by DYNET

Hello did you try VIVO V9 Pinout I think that both have same pinout you can send pm me your image link

I tried to send you an image by PM but it was not, it has exceeded your private message quota, compared to an image of the V9 and the boards have different layout

.::ARD::. · 06-09-2018, 01:17

Quote:

Originally Posted by luizwcell

I opened the device, I have a photo of the board but it was not possible to post an image because there were 10 posts, I could not identify the test point, no, who can request photos from the board

luizwcell · 06-09-2018, 01:51

Correct door !!! 9008 ok, I put the model x21 (x21A) and appears Open Boot file fail, make you have select it !! Can you tell me what's wrong?

.::ARD::. · 06-09-2018, 03:15

You need voot file to set !!! Use firehose file!!!set it

05-31-2018, 20:40	#1 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	vivo x21 does not enter 9008 mode pattern unlock I connect the USB cable holding volume up and down and goes into fastboot mode and not in 9008 mode If anyone has a tip, I'm grateful.

06-01-2018, 02:42	#2 (permalink)
308981113 No Life Poster Join Date: Mar 2010 Posts: 676 Member: 1274135 Status: Offline Thanks Meter: 157	Please lower the mobile version of the card brush package and enter 9008 mode to unlock it

06-03-2018, 14:49	#5 (permalink)
2111002640 Freak Poster Join Date: Nov 2015 Location: Việt Nam Posts: 473 Member: 2487960 Status: Offline Thanks Meter: 260	use testpoint bro................

06-03-2018, 22:28	#6 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	I opened the device, I have a photo of the board but it was not possible to post an image because there were 10 posts, I could not identify the test point, no, who can request photos from the board

06-08-2018, 02:54	#8 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	I can climb the image on the site, just can't put here because says that I have limitations posts to put links

06-08-2018, 03:06	#9 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	I can not find the test point on the board in any way, if anyone knows how to reinstall the room via sideload it also helps

06-08-2018, 19:15	#10 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	I was able to do recognize as Qualcomm HS-USB Diagnostics 900E, not time I give the command accuse Open Boot file fail, make sure you have select it !!!

06-08-2018, 20:15	#11 (permalink)
DYNET No Life Poster Join Date: Jul 2006 Location: CHINA Age: 34 Posts: 2,735 Member: 320363 Status: Offline Sonork: 100.1578853 Thanks Meter: 3,938	Hello did you try VIVO V9 Pinout I think that both have same pinout you can send pm me your image link

06-09-2018, 01:51	#14 (permalink)
luizwcell Junior Member Join Date: Jan 2017 Posts: 11 Member: 2675500 Status: Offline Thanks Meter: 0	Correct door !!! 9008 ok, I put the model x21 (x21A) and appears Open Boot file fail, make you have select it !! Can you tell me what's wrong?

06-09-2018, 03:15	#15 (permalink)
.::ARD::. Product Supporter Join Date: Dec 2011 Location: Indonesia / Guangzhou Age: 38 Posts: 5,036 Member: 1705891 Status: Offline Sonork: 100.1604564 Thanks Meter: 8,139	You need voot file to set !!! Use firehose file!!!set it