World First - Oppo f5 a30 tp method unlock MRT team ( f5 f5 yuth a83) - Page 9 - GSM-Forum

jayfox_111 · 12-12-2018, 12:08

oppo f5 youth password and frp any solution via mrt....always preloader n device..??

jayfox_111 · 12-12-2018, 12:36

Quote:

Originally Posted by DYNET

OPPO F5 A30 TP METHOD UNLOCK MRT TEAM ) F5 F5 YUTH A83)

HOW TO DO ?

DISASSEMBLE PHONE OPEN SCREW WARRNTY MAY BE VOID OPEN STICKER FOIL PROTECTED ON CPU AND RAM FIND RESISTOR ACCORDING PHOTO SHORT IT WITH GND CONNECT CABLE AND WAIT MTK PORT APPEAR START OPERATION BATTERY CONNECTED NEED

NOTE THIS IS NOT UPDATE THIS JUST SHARED TRICKS IN THIS NOTHING WORLD 1ST AND LAST

A83 TEST POINT

good pm sir pls.. guide or ii can see any idea via testpoint this model...this solution is workng sir and supported cph1725 new patch?

rbg25 · 12-12-2018, 12:52

a83 new security done thanks MRT team..........

anakbatam · 12-12-2018, 17:05

DYNET · 12-13-2018, 13:25

Disconnect tp after mtk port appear don't hold tp to gnd in full prepossess

JHUNpanabO · 12-15-2018, 13:10

tested on Oppo F5 CPH1723 EX_11.A30_181017

Aamir_Zia · 12-17-2018, 15:48

Oppo F5 CPH1727 TP is different ... it has different board Layout

rkdigitalhub · 12-18-2018, 12:05

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM47
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM6
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail

DYNET · 12-18-2018, 13:14

Quote:

Originally Posted by rkdigitalhub

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM47
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM6
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail

which model ??
DISCONNECT TP AFTER MTK PORT APPEAR DON'T HOLD TP TO GND IN FULL PREPOSSESS

regards
DYNET

Rajib sah · 12-18-2018, 15:20

Not work my phone oppo a83 map error

Rajib sah · 12-18-2018, 15:40

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM61
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM81
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail

grvmtl35 · 12-19-2018, 06:27

Quote:

Originally Posted by Rajib sah

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM61
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM81
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail

Remove Shorted TP Imidiately after connecting phone to remove map error. 100% Tested..

adriano II · 12-19-2018, 17:03

A83 new security done
thx for mrt team

cellgsm · 12-20-2018, 05:19

Done F5 CPH1625 .Thanks support !

orangbaik · 12-20-2018, 08:08

Never sory because buoght MRT, it's trully money maker. Great Tool
Salam teknisi Ndeso Gann!!!

12-12-2018, 17:05	#124 (permalink)
anakbatam Insane Poster Join Date: Mar 2012 Location: indonesia Age: 37 Posts: 61 Member: 1731024 Status: Offline Thanks Meter: 13	F5 Youth CPH1725 new security fail

12-12-2018, 12:08	#121 (permalink)
jayfox_111 Junior Member Join Date: Aug 2010 Posts: 20 Member: 1378788 Status: Offline Thanks Meter: 2	oppo f5 youth password and frp any solution via mrt....always preloader n device..??

12-12-2018, 12:52	#123 (permalink)
rbg25 Freak Poster Join Date: Nov 2013 Location: philippines Posts: 121 Member: 2075721 Status: Offline Sonork: smile for ever.. Thanks Meter: 15	a83 new security done thanks MRT team..........

12-13-2018, 13:25	#125 (permalink)
DYNET No Life Poster Join Date: Jul 2006 Location: CHINA Age: 34 Posts: 2,735 Member: 320363 Status: Offline Sonork: 100.1578853 Thanks Meter: 3,938	Disconnect tp after mtk port appear don't hold tp to gnd in full prepossess

12-15-2018, 13:10	#126 (permalink)
JHUNpanabO Freak Poster Join Date: Apr 2006 Location: PH-unlocktoys Posts: 497 Member: 265729 Status: Offline Thanks Meter: 144	tested on Oppo F5 CPH1723 EX_11.A30_181017

12-17-2018, 15:48	#127 (permalink)
Aamir_Zia No Life Poster Join Date: Dec 2003 Location: Karachi Pakistan Age: 38 Posts: 6,770 Member: 47321 Status: Offline Sonork: 100.54032 Thanks Meter: 497	Oppo F5 CPH1727 TP is different ... it has different board Layout

12-18-2018, 12:05	#128 (permalink)
rkdigitalhub Junior Member Join Date: Jul 2012 Posts: 4 Member: 1787280 Status: Offline Thanks Meter: 0	Disconnect Mobile... Re-Put the Mobile Bettery... Then Connect your Phone to Computer again.... Please Make sure Mobile better has Power... >>> Searching Mobile Port... Get Mobile Port is: COM47 >>> Device driver identification: MediaTek USB Port >>> Mobile Has Connect... CPU_NAME: MT6763 >>> Reading Mobile Hardware Info...Success HW_Inf: 8A00 SW_Inf: CA01 >>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success >>> Downloading Boot1 To Mobile Phone...Success Mobile phone status:SYNC... Mobile phone status swtich to :brom...Success Make sure Mobile status has in :brom... Init Mobile BOOT2 ... =====================Flash Type(eMMC)============== Flash Size: 0x0000000000000000 -> 0M Flash ID: 0x0000000000000000 Flash Name: UNKNOWN_UNKNOWN Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port... Get Mobile Port is: COM6 >>> Device driver identification: MediaTek DA USB VCOM (Android) >>> Reading Mobile Map Data...Fail

12-18-2018, 15:20	#130 (permalink)
Rajib sah Junior Member Join Date: Jan 2016 Location: Dhaka Bangladesh Posts: 7 Member: 2521327 Status: Offline Thanks Meter: 1	Not work my phone oppo a83 map error

12-18-2018, 15:40	#131 (permalink)
Rajib sah Junior Member Join Date: Jan 2016 Location: Dhaka Bangladesh Posts: 7 Member: 2521327 Status: Offline Thanks Meter: 1	Disconnect Mobile... Re-Put the Mobile Bettery... Then Connect your Phone to Computer again.... Please Make sure Mobile better has Power... >>> Searching Mobile Port... Get Mobile Port is: COM61 >>> Device driver identification: MediaTek USB Port_V1632 >>> Mobile Has Connect... CPU_NAME: MT6763 >>> Reading Mobile Hardware Info...Success HW_Inf: 8A00 SW_Inf: CA01 >>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success >>> Downloading Boot1 To Mobile Phone...Success Mobile phone status:SYNC... Mobile phone status swtich to :brom...Success Make sure Mobile status has in :brom... Init Mobile BOOT2 ... =====================Flash Type(eMMC)============== Flash Size: 0x0000000000000000 -> 0M Flash ID: 0x0000000000000000 Flash Name: UNKNOWN_UNKNOWN Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port... Get Mobile Port is: COM81 >>> Device driver identification: MediaTek DA USB VCOM (Android) >>> Reading Mobile Map Data...Fail

12-20-2018, 05:19	#134 (permalink)
cellgsm Junior Member Join Date: Apr 2008 Posts: 29 Member: 759708 Status: Offline Sonork: hpt Thanks Meter: 7	Done F5 CPH1625 .Thanks support !

12-20-2018, 08:08	#135 (permalink)
orangbaik Junior Member Join Date: Aug 2015 Posts: 22 Member: 2447529 Status: Offline Thanks Meter: 4	Never sory because buoght MRT, it's trully money maker. Great Tool Salam teknisi Ndeso Gann!!!