xiaomi redmi note 2 acccount not unlock

[podeevvector]

In MRT_FB_Tool -> Advanced Tool -> Fastboot readInfo:

Let the Mobile into Fastboot Mode
Connect your Mobile phone to computer with usb
Let Mobile Phone into Fastboot Mode
Connect your phone to computer By usb
Install Fastboot drivers
connecting mobile phone....
< waiting for device >
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
ext4
(bootloader) partition-size:cache: 25800000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: 80000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:tee2: 9c0000
:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
tition-type:logo: raw data
(bootloader) partition-sizeara: 80000
(bootloader) partition-typeara: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: ext4
(bootloader) partition-size:recovery: 8000000
oader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:lk: 400000
(bootloader) partition-type:lk: raw data
000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-sizerotect2: a00000
(bootloader) partition-typerotect2: ext4
(bootloader) partition-sizerotect1: a00000
(bootloader) partition-typerotect1: ext4
tion-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-sizeroinfo: 300000
(bootloader) partition-typeroinfo: raw data
(bootloader) partition-sizereloader: 40000
data
(bootloader) off-mode-charge: 1
(bootloader) warranty: no
(bootloader) unlocked: yes
(bootloader) secure: no
(bootloader) kernel: lk
(bootloader) product: hermes
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.031s
All is done....

SaveImg - óäîáíûé õîñòèíã êàðòèíîê áåç ëèøíåé ðåêëàìû!

Then Unlock_tool -> Unlock (Without Bl Lock):

Connecting Mobile Phone...
Erase userdata...
Erase MI Phone Account data...
Rebooting Mobile Phone!!!
All is Done!!!

SaveImg - óäîáíûé õîñòèíã êàðòèíîê áåç ëèøíåé ðåêëàìû!

Phone reboot and show message:

SaveImg - óäîáíûé õîñòèíã êàðòèíîê áåç ëèøíåé ðåêëàìû!

[podeevvector]

Read info Mtk special tool v1.000033 with tick redmi only

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM111
>>> Device driver identification:
MediaTek PreLoader USB VCOM (Android)
>>> Mobile Has Connect...
CPU_NAME: MT6795
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
The Flash Hardware Info:016G72
>>> Downloading Boot2 To Mobile Phone...Success
=====================Flash Type(eMMC)==============
Flash Size: 0x00000003AB400000 -> 15028M
Flash ID: 0x1101003031364737
Flash Name: Toshiba_Unknow
Flash symbol: 016G72
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM33
>>> Device driver identification:
DA USB VCOM Port
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>> Analysis of mobile phone data...
>>>>Reading Mobile Version Info...

[.::ARD::.]

Use mrt new version 1.33

[unitra]

Also not working at Note 2. Always success, but phone still locked.

Отправлено с моего PRO 5 через Tapatalk