02.12.2009 Phoenix Service Software - 2009.34.10.40495 - GSM-Forum

gulka · 12-04-2009, 19:01

Phoenix Service Software - 2009.34.10.40495
02.12.2009

This Phoenix Service Software installation package includes following SW
components:

- Phoenix Service Software 2009.34.10.40495
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver
version 6.85.15.0)
- Flash Update Package 09.044.022
- FLS-x Dongle Driver v 2.09.28
- FPS-11 version 5.10.0

Error corrections & changes:

- Corrections & changes to DCT-4 IMEI / ESN rebuild procedure
- Please note that depending on what has been replaced, JBV-1 needs
power supply from different sources.
- This is required, because depending on the case JBV-1 needs to set
phone in different operating modes
- Supply power to JBV-1 Docking station from FPS-10 or FPS-21 Flash
Prommer output or external power supply depending on what components
were replaced, see table above.
- Connect phone and scan product, read phone information to check
communication with phone
- Open “Tools” – “IMEI / ESN Rebuild DCT-4” - Menu
- Provide Tucson Password and PIN code which have been delivered to you
by email. Please note that characters are case sensitive
- Select “UEM Replaced” if needed, see table above.
- Please note that SW update must be done separately, it can not be
combined with this procedure

Known errors & limitations:

- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time

DOWNLOAD LINK

gulka · 12-05-2009, 06:05

Additional link:

rapidshare link

rana_jee · 12-05-2009, 08:48

dear gulka i need this file
"MT170_PCB01_GPRS_MT6225_S00.SRT_0716_v02.bin"

and its located in ns1.gsmforum.su in your post i can not read russian languge plz
would you like to help me giving any other downloadable link to this the link to your that post is
http://ns1.gsmforum.su/showthread.php?t=35688

rana_jee · 12-05-2009, 08:49

and plz also the attached image of pcb there in your post thanx in advance

ahmedksal · 12-09-2009, 16:40

Hi,
did anyone test this version. For me, latest version is not working with genie. Thanks and have a nice day.

Bph&co · 12-09-2009, 18:57

Quote:

Originally Posted by ahmedksal

Hi,
did anyone test this version. For me, latest version is not working with genie. Thanks and have a nice day.

Hi,

Maybe this is the reason, from original post

Code:

- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore

BR, Alex
B-phreaks

ahmedksal · 12-10-2009, 16:14

@Bph&co
HI,
SO WE HAVE REACHED THE END OF THE LINE, JUST RECEIVED MY BOX A WEEK AGO, THOUGHT THAT WE WILL CONTINUE USING IT WITH LATEST PHOENIX SOFTWARE. UNLESS TEAM COMES WITH A STANDALONE FLASHER, THEN I WILL HAVE TO SAY THAT THIS PRODUCT HAS BECOME LIKE PRODIGY AND FEDERAL ONE. HOPE THAT YOU DONT LET US DOWN. HAVE A NICE DAY.

Bph&co · 12-10-2009, 16:45

Quote:

Originally Posted by ahmedksal

@Bph&co
THIS PRODUCT HAS BECOME LIKE PRODIGY AND FEDERAL ONE..

Hi,

You mean that Prodigy don't support phones that Nokia will release in 2014 ?
Yeah sorry for that, i think was quite ok for phones in 2002-2004 when was
still on sale.

For F1, details are blurry now, but as far as i can remember the manufacturer
couldn't reach sales target to justify development - he sold maybe 800 pieces
for 1-2 years.

Products come and go as market demand changes and technology need upgrading,
I suppose you are not using Nokia 5110, it was quite cool in 1998, but still....

BR, Alex

Amir-SkillZ · 12-10-2009, 17:02

Quote:

Originally Posted by Bph&co

Hi,

You mean that Prodigy don't support phones that Nokia will release in 2014 ?
Yeah sorry for that, i think was quite ok for phones in 2002-2004 when was
still on sale.

For F1, details are blurry now, but as far as i can remember the manufacturer
couldn't reach sales target to justify development - he sold maybe 800 pieces
for 1-2 years.

Products come and go as market demand changes and technology need upgrading,
I suppose you are not using Nokia 5110, it was quite cool in 1998, but still....

BR, Alex

U DAMN RITE ....
We have to change with Life Else he Make U !

fypoi · 12-10-2009, 22:43

Quote:

Originally Posted by ahmedksal

Hi,
did anyone test this version. For me, latest version is not working with genie. Thanks and have a nice day.

i confirm bro not work for me too, only error now i uninstall it and instal old version

br

Burebista · 12-10-2009, 23:51

I'll try this latest version with pkd1 emulator and post results if it's working.Several times I used phoenix with fls5 emulator from this clip and all the time I'm using it via pkd1 from mt because it stays all the time conected on usb port.

roniri · 12-11-2009, 00:49

I have fps10 with pkd1 dongle,but installation is not successfull. After install connectivity driver the producere stoped and phonenix software is not installed. What is wrong?

senkron24 · 12-11-2009, 16:58

Quote:

Originally Posted by roniri

I have fps10 with pkd1 dongle,but installation is not successfull. After install connectivity driver the producere stoped and phonenix software is not installed. What is wrong?

i have exackt same problme

it cannot installed with pkd1 fps10

dongel error

ahmedksal · 12-11-2009, 17:19

Hi,
yeh always sarcasm from team when they lack behind. My greatest blunder was buying this product. So i will keep advicing my friends not to touch this product anymore. What is the use of a box when you only use it for unlock. Have a nice day.

gulka · 12-11-2009, 19:08

Quote:

Originally Posted by senkron24

i have exackt same problme

it cannot installed with pkd1 fps10

dongel error

Established and operated without problems -PKD1

12-04-2009, 19:01	#1 (permalink)
gulka No Life Poster Join Date: May 2006 Location: Mountains Posts: 531 Member: 276322 Status: Offline Thanks Meter: 293	02.12.2009 Phoenix Service Software - 2009.34.10.40495 Phoenix Service Software - 2009.34.10.40495 02.12.2009 This Phoenix Service Software installation package includes following SW components: - Phoenix Service Software 2009.34.10.40495 - DK2 Dongle Driver v 7.14.0.25 - Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver version 6.85.15.0) - Flash Update Package 09.044.022 - FLS-x Dongle Driver v 2.09.28 - FPS-11 version 5.10.0 Error corrections & changes: - Corrections & changes to DCT-4 IMEI / ESN rebuild procedure - Please note that depending on what has been replaced, JBV-1 needs power supply from different sources. - This is required, because depending on the case JBV-1 needs to set phone in different operating modes - Supply power to JBV-1 Docking station from FPS-10 or FPS-21 Flash Prommer output or external power supply depending on what components were replaced, see table above. - Connect phone and scan product, read phone information to check communication with phone - Open “Tools” – “IMEI / ESN Rebuild DCT-4” - Menu - Provide Tucson Password and PIN code which have been delivered to you by email. Please note that characters are case sensitive - Select “UEM Replaced” if needed, see table above. - Please note that SW update must be done separately, it can not be combined with this procedure Known errors & limitations: - Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept. - Flashing with Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore - If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8. - Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time DOWNLOAD LINK

12-09-2009, 16:40	#5 (permalink)
ahmedksal No Life Poster Join Date: Jul 2003 Location: LEBANON Posts: 2,756 Member: 33690 Status: Offline Thanks Meter: 3,398	Hello Hi, did anyone test this version. For me, latest version is not working with genie. Thanks and have a nice day.

12-10-2009, 16:14	#7 (permalink)
ahmedksal No Life Poster Join Date: Jul 2003 Location: LEBANON Posts: 2,756 Member: 33690 Status: Offline Thanks Meter: 3,398	Hello @Bph&co HI, SO WE HAVE REACHED THE END OF THE LINE, JUST RECEIVED MY BOX A WEEK AGO, THOUGHT THAT WE WILL CONTINUE USING IT WITH LATEST PHOENIX SOFTWARE. UNLESS TEAM COMES WITH A STANDALONE FLASHER, THEN I WILL HAVE TO SAY THAT THIS PRODUCT HAS BECOME LIKE PRODIGY AND FEDERAL ONE. HOPE THAT YOU DONT LET US DOWN. HAVE A NICE DAY.

12-11-2009, 17:19	#14 (permalink)
ahmedksal No Life Poster Join Date: Jul 2003 Location: LEBANON Posts: 2,756 Member: 33690 Status: Offline Thanks Meter: 3,398	Hello Hi, yeh always sarcasm from team when they lack behind. My greatest blunder was buying this product. So i will keep advicing my friends not to touch this product anymore. What is the use of a box when you only use it for unlock. Have a nice day.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
27.10.2009 - Phoenix Service Software - 2009.34.7.40015	mm-gsm	MT-BOX	0	10-27-2009 20:25
Released : Phoenix Service Software - 2009.34.6.39750	Reza99	MT-BOX	4	10-16-2009 17:48
Phoenix Service Software 2009.34.6.39750 Cracked	amras555	Nokia Base Band 5 ( BB-5 )	0	10-13-2009 09:50
Phoenix Service Software 2009.34.6.39750	gulka	Genie Universal	4	10-02-2009 07:58

12-05-2009, 06:05	#2 (permalink)
gulka No Life Poster Join Date: May 2006 Location: Mountains Posts: 531 Member: 276322 Status: Offline Thanks Meter: 293	Additional link: rapidshare link

12-05-2009, 08:48	#3 (permalink)
rana_jee Freak Poster Join Date: Jun 2006 Location: PAKISTAN Posts: 223 Member: 290794 Status: Offline Thanks Meter: 31	dear gulka i need this file "MT170_PCB01_GPRS_MT6225_S00.SRT_0716_v02.bin" and its located in ns1.gsmforum.su in your post i can not read russian languge plz would you like to help me giving any other downloadable link to this the link to your that post is http://ns1.gsmforum.su/showthread.php?t=35688

12-05-2009, 08:49	#4 (permalink)
rana_jee Freak Poster Join Date: Jun 2006 Location: PAKISTAN Posts: 223 Member: 290794 Status: Offline Thanks Meter: 31	and plz also the attached image of pcb there in your post thanx in advance

12-10-2009, 23:51	#11 (permalink)
Burebista No Life Poster Join Date: Feb 2006 Location: In a point from Universe! Age: 40 Posts: 1,633 Member: 235325 Status: Offline Sonork: 100.1593552 Thanks Meter: 523	I'll try this latest version with pkd1 emulator and post results if it's working.Several times I used phoenix with fls5 emulator from this clip and all the time I'm using it via pkd1 from mt because it stays all the time conected on usb port.

12-11-2009, 00:49	#12 (permalink)
roniri No Life Poster Join Date: Sep 2001 Location: Hungary, Pécs Age: 48 Posts: 1,240 Member: 6142 Status: Offline Sonork: i dont use it Thanks Meter: 47	I have fps10 with pkd1 dongle,but installation is not successfull. After install connectivity driver the producere stoped and phonenix software is not installed. What is wrong?