How to unlock my 2760 ? - GSM-Forum

Berni_JUHU · 02-11-2010, 11:17

Can you please tell me how to unlock my 2760 !?
I only use the Genie-Box and always get an error !
Do i need the PC GenieSuite synced while unlocking ?
Thx,
B.

paabu12 · 02-11-2010, 18:37

Run Clip in USB Mode, connect to PC, execute the DCT4Plus Installer.

After Installation run the Script standalone from "Menu-Programs-Script-4Plus.smx"
Make sure phone is in Test mode
(Connect the cable to phone from Genie adapter, run 4Plus.smx and push the power key on the phone till the phone vibrates and Test mode will show)

Repeat this till you get the phone in Test mode or else you will always get error!

Berni_JUHU · 02-17-2010, 09:41

Thx for your help, but it doesn´t work ...
always get an error - but the phone gets the "test mode" - sadly no success ...
any other idea ?

powerplay83 · 02-17-2010, 11:34

you have to set the resistor to NC on Genie Cable adapter..

Berni_JUHU · 02-17-2010, 13:33

Phone power on .... done
Checking phone .... error

Any idea what i´m doing wrong !?

4plus.smx SW-Version is 0.3 ( newest one )

powerplay83 · 02-17-2010, 19:53

maybe BAD Cable....

use good quality cable.

Berni_JUHU · 02-18-2010, 09:59

cannot be the cable - it´s the same with another one ( 2630 )
So all cables must be worse, if you´re right - i don´t think so.
Almost all BB5 are unproblematic to unlock !!

It´s only a Problem with any DCT4Plus device ...

Thx

powerplay83 · 02-18-2010, 19:58

i can help you online via teamviewer if u want contact me on PM..

SJS · 02-18-2010, 22:22

Have the same problem with Dct4 plus. Clip show me: unlock done, but phone still locked. Tested in 1680, 2760 and 2630. What can it be? Clip working fine in BB5 ntp unlocker, and clip is up to date!

02-11-2010, 11:17	#1 (permalink)
Berni_JUHU Junior Member Join Date: Apr 2006 Posts: 13 Member: 255038 Status: Offline Thanks Meter: 0	How to unlock my 2760 ? Can you please tell me how to unlock my 2760 !? I only use the Genie-Box and always get an error ! Do i need the PC GenieSuite synced while unlocking ? Thx, B.

02-17-2010, 09:41	#3 (permalink)
Berni_JUHU Junior Member Join Date: Apr 2006 Posts: 13 Member: 255038 Status: Offline Thanks Meter: 0	error again Thx for your help, but it doesn´t work ... always get an error - but the phone gets the "test mode" - sadly no success ... any other idea ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to unlock Nokia 2760	lnw	Nokia Digital Core Technology 4 ( DCT-4 )	10	12-29-2009 14:31
How to unlock Nokia 2760 & 2630	brijmehta1	MT-BOX	9	05-27-2008 09:57
how to unlock nokia 2760 with mt box	toutou_gsm	MT-BOX	0	03-16-2008 20:31
How to unlock my Nokia 3210 with an FBUS cable?	nex	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	15	08-31-2001 11:45

02-11-2010, 18:37	#2 (permalink)
paabu12 Freak Poster Join Date: Oct 2007 Location: Washington, DC USA Posts: 208 Member: 605364 Status: Offline Thanks Meter: 36	Run Clip in USB Mode, connect to PC, execute the DCT4Plus Installer. After Installation run the Script standalone from "Menu-Programs-Script-4Plus.smx" Make sure phone is in Test mode (Connect the cable to phone from Genie adapter, run 4Plus.smx and push the power key on the phone till the phone vibrates and Test mode will show) Repeat this till you get the phone in Test mode or else you will always get error!

02-17-2010, 11:34	#4 (permalink)
powerplay83 No Life Poster Join Date: Apr 2008 Location: Germany Posts: 1,455 Member: 753732 Status: Offline Thanks Meter: 252	you have to set the resistor to NC on Genie Cable adapter..

02-17-2010, 13:33	#5 (permalink)
Berni_JUHU Junior Member Join Date: Apr 2006 Posts: 13 Member: 255038 Status: Offline Thanks Meter: 0	Phone power on .... done Checking phone .... error Any idea what i´m doing wrong !? 4plus.smx SW-Version is 0.3 ( newest one )

02-17-2010, 19:53	#6 (permalink)
powerplay83 No Life Poster Join Date: Apr 2008 Location: Germany Posts: 1,455 Member: 753732 Status: Offline Thanks Meter: 252	maybe BAD Cable.... use good quality cable.

02-18-2010, 09:59	#7 (permalink)
Berni_JUHU Junior Member Join Date: Apr 2006 Posts: 13 Member: 255038 Status: Offline Thanks Meter: 0	cannot be the cable - it´s the same with another one ( 2630 ) So all cables must be worse, if you´re right - i don´t think so. Almost all BB5 are unproblematic to unlock !! It´s only a Problem with any DCT4Plus device ... Thx

02-18-2010, 19:58	#8 (permalink)
powerplay83 No Life Poster Join Date: Apr 2008 Location: Germany Posts: 1,455 Member: 753732 Status: Offline Thanks Meter: 252	i can help you online via teamviewer if u want contact me on PM..

02-18-2010, 22:22	#9 (permalink)
SJS No Life Poster Join Date: Aug 2002 Location: Austria-Velden Age: 29 Posts: 860 Member: 14684 Status: Offline Thanks Meter: 60	Have the same problem with Dct4 plus. Clip show me: unlock done, but phone still locked. Tested in 1680, 2760 and 2630. What can it be? Clip working fine in BB5 ntp unlocker, and clip is up to date!