New 2.4.71 Firmware - GSM-Forum

Yessim Support · 08-19-2008, 15:27

Kindly try this new firmware.

You will need to uplaod the firmware into the yessim first.

Then Select Mode ' Normal / Boost '
MCCMNC
Patch count like before even if the whole process is different... can use 30 in most of the phones

I will take around 1 min to finish the registering process.

For Iphone Kindly use Boost mode and PC1 You will have full features 3G all...just make sure 3G is enable Dataroaming is enables and Network search should be in Auto

This UPDATE in NEW and NEED be tested on all Phones... Kindly post feedback before we make official anoucement

juanbanco · 08-19-2008, 16:48

Thanks you solved my problems with this update. Keep good work up..

driadulevante · 08-19-2008, 23:48

I still have Network problem with Nokia (tested on N95 and 6280) and 2.4.7.1. No incoming call if phone is registered in 3G network. For Nokia I think 2.3 is still the best.

GFI · 08-20-2008, 05:06

I have been trying since u posted it but it just cant read the serial number of the card

I believe customers will be happier if we can just update the cards without the server and with a better programmer

GFI · 08-20-2008, 05:20

Server is offline when I am lucky to read the serial of the cards after many tries.

fretburner · 08-20-2008, 13:52

812SH Softbank restart problem using this firmware
Frimware version : Yessim firmware V:2.4 beta71 (c)
MCC-MNC : 001-01
Mode : Boost Mode.
IMSI Patch Count : 30

juanbanco · 08-20-2008, 22:24

I am using firmware 2.4.71 Iphone 3g locked to AT and T. Boost mode patch count 1 as suggested but, signal comes and goes almost to no service constantly. Can someone help?

also tried with 2.4.72 firmware and phone did not recognize Sim Card at all.

Support hands on this...

juanbanco · 08-21-2008, 00:02

Quote:

Originally Posted by juanbanco

I am using firmware 2.4.71 Iphone 3g locked to AT and T. Boost mode patch count 1 as suggested but, signal comes and goes almost to no service constantly. Can someone help?

also tried with 2.4.72 firmware and phone did not recognize Sim Card at all.

Support hands on this...

Also only outgoing calls incoming calls not supported.

fusarista · 08-21-2008, 03:51

this a joke ?

please this virus or what ?

juanbanco · 08-21-2008, 03:53

That file is a virus not an update client. do not open. Administrator delete his post and ban him.

derrytea · 08-21-2008, 04:19

yup this new firmware works like a charm on my huawei u526 using 32kb sim
but sometimes it doesnt work on the "received call" issue
i guess i should check about the operator signal...

Yessim Support · 08-21-2008, 05:56

Thx please try this new firmware as much as possible we want to release our final firmware with some surprised inside but must have all bugs fixed.

All firmware we release are working fine for us but many Operator available and phones this is why we need you to report feed back. Positive and Negative. We just want to give you the best product of the Market.

Br

GFI · 08-21-2008, 09:13

Is there problem with china isp or what as the server is alway display offline. Even if I use proxy of another country its still offline.

maplegsm · 08-22-2008, 09:04

new version is buggy i update yessim with New version 2.4.71 for Nokia 6500 RM-240 and face no network prblem i change it to boost mode but problem is same when i downgrade in 2.4.3 my problem solved

BR
MAPLE GSM(UMER)

Yessim Support · 08-25-2008, 16:29

When you are testing the New firmware the patch count are very important should start from 1.

Nokia should be fully fine with the new firmwares

08-19-2008, 15:27	#1 (permalink)
Yessim Support Freak Poster Join Date: Jun 2008 Posts: 340 Member: 799206 Status: Offline Sonork: 100.67372 Thanks Meter: 276	New 2.4.71 Firmware Kindly try this new firmware. You will need to uplaod the firmware into the yessim first. Then Select Mode ' Normal / Boost ' MCCMNC Patch count like before even if the whole process is different... can use 30 in most of the phones I will take around 1 min to finish the registering process. For Iphone Kindly use Boost mode and PC1 You will have full features 3G all...just make sure 3G is enable Dataroaming is enables and Network search should be in Auto This UPDATE in NEW and NEED be tested on all Phones... Kindly post feedback before we make official anoucement Last edited by Yessim Support; 08-20-2008 at 04:08.

08-19-2008, 16:48	#2 (permalink)
juanbanco Major Poster Join Date: Sep 2006 Posts: 49 Member: 353802 Status: Offline Thanks Meter: 4	Thanks you solved my problems with this update. Keep good work up..

08-19-2008, 23:48	#3 (permalink)
driadulevante Junior Member Join Date: Aug 2008 Posts: 14 Member: 828118 Status: Offline Thanks Meter: 0	I still have Network problem with Nokia (tested on N95 and 6280) and 2.4.7.1. No incoming call if phone is registered in 3G network. For Nokia I think 2.3 is still the best.

08-20-2008, 05:06	#4 (permalink)
GFI No Life Poster Join Date: Jun 2006 Location: Inside Blackberry Posts: 1,036 Member: 288462 Status: Offline Thanks Meter: 87	I have been trying since u posted it but it just cant read the serial number of the card I believe customers will be happier if we can just update the cards without the server and with a better programmer

08-20-2008, 05:20	#5 (permalink)
GFI No Life Poster Join Date: Jun 2006 Location: Inside Blackberry Posts: 1,036 Member: 288462 Status: Offline Thanks Meter: 87	Server is offline when I am lucky to read the serial of the cards after many tries.

08-20-2008, 13:52	#6 (permalink)
fretburner No Life Poster Join Date: Dec 2003 Location: philippines Posts: 624 Member: 45571 Status: Offline Thanks Meter: 45	812SH Softbank restart problem using this firmware Frimware version : Yessim firmware V:2.4 beta71 (c) MCC-MNC : 001-01 Mode : Boost Mode. IMSI Patch Count : 30

08-20-2008, 22:24	#7 (permalink)
juanbanco Major Poster Join Date: Sep 2006 Posts: 49 Member: 353802 Status: Offline Thanks Meter: 4	I am using firmware 2.4.71 Iphone 3g locked to AT and T. Boost mode patch count 1 as suggested but, signal comes and goes almost to no service constantly. Can someone help? also tried with 2.4.72 firmware and phone did not recognize Sim Card at all. Support hands on this...

08-21-2008, 03:51	#9 (permalink)
fusarista No Life Poster Join Date: Jan 2008 Posts: 518 Member: 682203 Status: Offline Thanks Meter: 111	this a joke ? please this virus or what ?

08-21-2008, 03:53	#10 (permalink)
juanbanco Major Poster Join Date: Sep 2006 Posts: 49 Member: 353802 Status: Offline Thanks Meter: 4	That file is a virus not an update client. do not open. Administrator delete his post and ban him.

08-21-2008, 04:19	#11 (permalink)
derrytea Freak Poster Join Date: Sep 2005 Location: quantity or quality? :) Posts: 292 Member: 179142 Status: Offline Thanks Meter: 42	yup this new firmware works like a charm on my huawei u526 using 32kb sim but sometimes it doesnt work on the "received call" issue i guess i should check about the operator signal...

08-21-2008, 05:56	#12 (permalink)
Yessim Support Freak Poster Join Date: Jun 2008 Posts: 340 Member: 799206 Status: Offline Sonork: 100.67372 Thanks Meter: 276	Thx please try this new firmware as much as possible we want to release our final firmware with some surprised inside but must have all bugs fixed. All firmware we release are working fine for us but many Operator available and phones this is why we need you to report feed back. Positive and Negative. We just want to give you the best product of the Market. Br

08-21-2008, 09:13	#13 (permalink)
GFI No Life Poster Join Date: Jun 2006 Location: Inside Blackberry Posts: 1,036 Member: 288462 Status: Offline Thanks Meter: 87	Is there problem with china isp or what as the server is alway display offline. Even if I use proxy of another country its still offline.

08-22-2008, 09:04	#14 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	new version is buggy i update yessim with New version 2.4.71 for Nokia 6500 RM-240 and face no network prblem i change it to boost mode but problem is same when i downgrade in 2.4.3 my problem solved BR MAPLE GSM(UMER)

08-25-2008, 16:29	#15 (permalink)
Yessim Support Freak Poster Join Date: Jun 2008 Posts: 340 Member: 799206 Status: Offline Sonork: 100.67372 Thanks Meter: 276	When you are testing the New firmware the patch count are very important should start from 1. Nokia should be fully fine with the new firmwares