problem taking yesim out of Iphone 3g - GSM-Forum

Hitec Wireless · 09-10-2008, 02:42

Just got yesim pkg from suplyer , programmed and put in to Iphone 3g , it works , my customer iphone from Rogers , but my problem is taking it out , i had to dissasemble the phone to take sim and yesim out , that is pain in the batt , the little chip on yesim stack and i had to take phone a part , then ones it was out i looked under microscope and few contact where demaged , so i needed to resolder it , why its happening ? its very hard for end user if they changing sims from phone to phone .

Hitec

mrfixit · 09-10-2008, 02:47

put yessim inside iphone and connect it with thin wires, then customer can change his sim without problems and never damage yessim or 3g.

Hitec Wireless · 09-10-2008, 02:51

Thin wires ??????????????? explaine yourself
i attached yesim to sim card by suppled double sided tape , but taking it out it always sticks with chip component it the sim holder .

Hitec

mrfixit · 09-10-2008, 02:53

reload page and see previous post, good luck. not my idea but believe its good.

Hitec Wireless · 09-10-2008, 02:56

That is wikked solution , ok will try, so do i solder wires to sim contacts in the sim holder ?

Hitec

mrfixit · 09-10-2008, 02:59

here another member posted this link:
http://iphone4.tw/blog/2008/08/28/437/#more-437

Yessim Support · 09-11-2008, 17:02

You can also try this :

http://www.gsmhackers.net/vb_board/showthread.php?t=195

09-10-2008, 02:42	#1 (permalink)
Hitec Wireless No Life Poster Join Date: Apr 2006 Location: Canada, Toronto Age: 56 Posts: 503 Member: 268951 Status: Offline Thanks Meter: 46	problem taking yesim out of Iphone 3g Just got yesim pkg from suplyer , programmed and put in to Iphone 3g , it works , my customer iphone from Rogers , but my problem is taking it out , i had to dissasemble the phone to take sim and yesim out , that is pain in the batt , the little chip on yesim stack and i had to take phone a part , then ones it was out i looked under microscope and few contact where demaged , so i needed to resolder it , why its happening ? its very hard for end user if they changing sims from phone to phone . Hitec

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Version Of Iphone 3G Is Possible To Unlock???	Sonu Jawed	iPhone 2 / iPhone 3G / iPhone 3GS	2	10-23-2008 23:05
Why all XXX-SIM Signal out on iPHONE 3G	Ja\/\/aD	iPhone 2 / iPhone 3G / iPhone 3GS	3	08-31-2008 20:36
Looking for card reader of Iphone 3G	rudyab	iPhone 2 / iPhone 3G / iPhone 3GS	0	07-28-2008 14:56
E550 how to take it out of blank mode?!	goran124	Ultima Box Light	0	09-14-2007 12:12
Problem T500 is out-of-work, but telephone shows the indicator of charge without char	sima80	VLSI, Conexant, Skyworks and Old Models	2	07-29-2003 09:16

09-10-2008, 02:47	#2 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	put yessim inside iphone and connect it with thin wires, then customer can change his sim without problems and never damage yessim or 3g.

09-10-2008, 02:51	#3 (permalink)
Hitec Wireless No Life Poster Join Date: Apr 2006 Location: Canada, Toronto Age: 56 Posts: 503 Member: 268951 Status: Offline Thanks Meter: 46	Thin wires ??????????????? explaine yourself i attached yesim to sim card by suppled double sided tape , but taking it out it always sticks with chip component it the sim holder . Hitec

09-10-2008, 02:53	#4 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	reload page and see previous post, good luck. not my idea but believe its good.

09-10-2008, 02:56	#5 (permalink)
Hitec Wireless No Life Poster Join Date: Apr 2006 Location: Canada, Toronto Age: 56 Posts: 503 Member: 268951 Status: Offline Thanks Meter: 46	That is wikked solution , ok will try, so do i solder wires to sim contacts in the sim holder ? Hitec

09-10-2008, 02:59	#6 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	here another member posted this link: http://iphone4.tw/blog/2008/08/28/437/#more-437

09-11-2008, 17:02	#7 (permalink)
Yessim Support Freak Poster Join Date: Jun 2008 Posts: 340 Member: 799206 Status: Offline Sonork: 100.67372 Thanks Meter: 276	You can also try this : http://www.gsmhackers.net/vb_board/showthread.php?t=195