flash chip spansion S29WS256R_T not supported

[mantok]

product supporter please support this chip

[FasGsm]

ok v will try to add in next update.

[duniacell]

Originally Posted by FasGsm

ok v will try to add in next update.

i'm waiting sir.....

[mantok]

Originally Posted by FasGsm

ok v will try to add in next update.

i hope there is a little fast support next time sir

another product supporter were working fast too

[mantok]

here is the log


Connecting...
Hardware version:8A05
CPU Type: 6225
CPUID :030D0700
Boot downloading complete!
Flash I01007E002600030AEA0000000000
Flash Siz0x2000000
Flash reading complete!
The data has been saved in C:\CPF\CPF_BOX_II\Data\TINNO25_08A_GEMINI_PCB01_GP RS_MT6225_S00.E506A_MP_SP18_65NM_TELKOM, size: 32 M.
Waiting for phone's response,press the Power on the phone...
Connecting...
Hardware version:8A05
CPU Type: 6225
CPUID :030D0700
Boot downloading complete!
Flash I01007E002600030AEA0000000000
Flash Siz0x2000000
Format address:1C00000-2000000
Format area:400000
Flash formating...
>>wrong code 501

[FasGsm]

Originally Posted by mantok

here is the log


Connecting...
Hardware version:8A05
CPU Type: 6225
CPUID :030D0700
Boot downloading complete!
Flash I01007E002600030AEA0000000000
Flash Siz0x2000000
Flash reading complete!
The data has been saved in C:\CPF\CPF_BOX_II\Data\TINNO25_08A_GEMINI_PCB01_GP RS_MT6225_S00.E506A_MP_SP18_65NM_TELKOM, size: 32 M.
Waiting for phone's response,press the Power on the phone...
Connecting...
Hardware version:8A05
CPU Type: 6225
CPUID :030D0700
Boot downloading complete!
Flash I01007E002600030AEA0000000000
Flash Siz0x2000000
Format address:1C00000-2000000
Format area:400000
Flash formating...
>>wrong code 501

if u can read file then flash chip is supported no problem in supporting that chip.did u try with both mtk tool?

[mantok]

never try before , what is the latest of mtk tool ??

would u give me the link that i can download, so i can post here again the log if it success

[mantok]

i found another problem here , cpf can't find pinout of this phone micxon s900

it used mtk chip 6225 , i used another tool , it working well

[mantok]

here is fw name

D105_DCTC_S900C_LATIN_PCB01_GPRS_MT6225_S00.SDT_R_ D105_DCTC_S900C_SAM_LT_V1_02


Timer: _2010_6_30_14_25_54>> [MTK] Open COM38 success!
Timer: _2010_6_30_14_25_54>> Press ON/OFF key please...
Timer: _2010_6_30_14_26_9>> Target's hw_ver :0x8A05
Timer: _2010_6_30_14_26_9>> Target's hw_code :0x6225
Timer: _2010_6_30_14_26_9>> Target's sw_ver :0x8A00
Timer: _2010_6_30_14_26_10>> Get correct bootloader for target...
Timer: _2010_6_30_14_26_10>> MTK_AllInOne_DA_v3.0952.00.00
Timer: _2010_6_30_14_26_10>> DA--->3 is selected!
Timer: _2010_6_30_14_26_10>> You can release ON/OFF key!
Timer: _2010_6_30_14_26_10>> [DA] loading bootloader 1...
Success!Timer: _2010_6_30_14_26_16>> [DA] loading bootloader 2...
Success!Timer: _2010_6_30_14_26_22>> [BROM] start to test UART link...
Timer: _2010_6_30_14_26_22>> [DA] Check NOR flash IC...
Timer: _2010_6_30_14_26_22>> [DA] Check NAND flash IC...
Fail!Timer: _2010_6_30_14_26_23>> Waiting the bootloader initilize...
Timer: _2010_6_30_14_26_24>> [COM] Success to set baudrate!
Timer: _2010_6_30_14_26_24>> [DA] Bootloader running now,OK
Timer: _2010_6_30_14_26_24>> [DA] Auto Format Info:
Timer: _2010_6_30_14_26_24>> [DA] StartBaseAddr[0x1C00000] size[0x400000]
Timer: _2010_6_30_14_26_24>> [DA] Start to read Target flash
Timer: _2010_6_30_14_26_24>> Nor backup to105_DCTC_S900C_LATIN_PCB01_GPRS_MT6225_S00.SDT _R_D105_DCTC_S900C_SAM_LT_V1_02.bin
Timer: _2010_6_30_14_26_24>> Start [0x00000000]size[0x02000000]
Timer: _2010_6_30_14_35_30>> Read full flash file complete!
Timer: _2010_6_30_14_35_30>> [MTK] Close COM38 success!