Help -my box lose testmode ??? - Phone does not power on - GSM-Forum

M_ALEX · 10-16-2008, 14:37

Hello

my noox box lose possiblity power phone in test mode ....???
for make unlock I must connect external power (+BSI conected)

but conector Vcc & GND show 4,5V...
and when I try connect N73 with externalpower phone only start 1s. vibra
cant show test mode and impossible unlock this.

how repair this ??? Please help ?

Regards

M_ALEX

**NoooX-Box** · 10-16-2008, 15:15

Do you use a USB Hub?
Use only direct PC USB port!

Disassembly complete phone and use only PCB without camera and LC display.
Connect +, BSI, ground and popport cable to phone and simulate power on with a tweezer.

NoooX-Team

M_ALEX · 10-16-2008, 18:49

I have box connected always directly with USB 2.0 controler PCI VIA (VT-6212)
working good 1 month after this time cant run any phones in test mode but when I use external power phone enter in test mode and possible still unlock.
only any N73 cant enter in test or lokal mode... for unlocking this model I use Dejan box as power box ;-)....
but I want repair my box, be again work when be new.

please send me scheme or diagram block box with part responsiblity about power phone .

A waiting your sunnest information

Regards

M_ALEX

**NoooX-Box** · 10-20-2008, 23:41

You have problems with N73?
Or with all phones?

NoooX-Team

M_ALEX · 10-21-2008, 09:18

I have problems with all phones. but N73 completly cant possible put in local mode. for others phones I must use external power together with cables from box.

M_ALEX

**NoooX-Box** · 10-21-2008, 13:52

Try to resolder phone connector on PCB.

If it does not help you can contact me via sonork for more instructions.

NoooX-Team

M_ALEX · 10-23-2008, 15:06

Hello

I open this box and check..... and find two burned resistors R7, R8.
Please tell me what are their values ?

east51 · 10-23-2008, 16:02

hello,
"I open this box and check..... and find two burned resistors R7, R8.
Please tell me what are their values "

i have same problem i posted today

http://rapidshare.de/files/40742435/noox.BMP.html
http://rapidshare.de/files/40742432/nooox.JPG.html

please give support

east51

**koksi** · 10-23-2008, 17:01

both have 1 OHM

change them and box should work

(and look that you dont short cables again)

M_ALEX · 10-23-2008, 17:10

exactly.... I have this!!!

Thank You ;-) ...he is work as fuse.

east51 · 10-23-2008, 18:40

problem solved by changing R7 and R8

http://rapidshare.de/files/40743741/new_R7_R8.BMP.html

thx for quick support

**NoooX-Box** · 10-23-2008, 19:54

Ok, here is the picture for the solution.

NoooX-Team

10-16-2008, 14:37	#1 (permalink)
M_ALEX Freak Poster Join Date: Nov 2002 Location: Poland Age: 56 Posts: 144 Member: 17920 Status: Offline Thanks Meter: 10	Help -my box lose testmode ??? - Phone does not power on Hello my noox box lose possiblity power phone in test mode ....??? for make unlock I must connect external power (+BSI conected) but conector Vcc & GND show 4,5V... and when I try connect N73 with externalpower phone only start 1s. vibra cant show test mode and impossible unlock this. how repair this ??? Please help ? Regards M_ALEX

10-16-2008, 15:15	#2 (permalink)
NoooX-Box Product Manager Join Date: Aug 2008 Location: inside ProASIC3 Posts: 366 Member: 833635 Status: Offline Sonork: 100.1578967 Thanks Meter: 604	Do you use a USB Hub? Use only direct PC USB port! Disassembly complete phone and use only PCB without camera and LC display. Connect +, BSI, ground and popport cable to phone and simulate power on with a tweezer. NoooX-Team Last edited by NoooX-Box; 10-16-2008 at 15:40.

10-23-2008, 17:01	#9 (permalink)
koksi Product Manager Join Date: Jan 2003 Posts: 411 Member: 19575 Status: Offline Thanks Meter: 134	both have 1 OHM change them and box should work (and look that you dont short cables again) Last edited by NoooX-Box; 10-23-2008 at 19:51.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my lg-km710 does not power on after locked	rasheed88	LG Hardware Repair	0	01-17-2010 03:41
6131 Does not power on on battry but it works perfect while I connect UFS Cabel	.:.GSM-ANGEL.:.	Nokia Base Band 5 ( BB-5 )	1	10-25-2007 12:24
i connect the DC supply but phone does not power on	kaholukkk	UID - Box	2	10-06-2007 15:38
Siemens SL45 does not power on.	sat	Siemens Hardware Repair Area	0	01-09-2002 08:15

10-16-2008, 18:49	#3 (permalink)
M_ALEX Freak Poster Join Date: Nov 2002 Location: Poland Age: 56 Posts: 144 Member: 17920 Status: Offline Thanks Meter: 10	I have box connected always directly with USB 2.0 controler PCI VIA (VT-6212) working good 1 month after this time cant run any phones in test mode but when I use external power phone enter in test mode and possible still unlock. only any N73 cant enter in test or lokal mode... for unlocking this model I use Dejan box as power box ;-).... but I want repair my box, be again work when be new. please send me scheme or diagram block box with part responsiblity about power phone . A waiting your sunnest information Regards M_ALEX

10-20-2008, 23:41	#4 (permalink)
NoooX-Box Product Manager Join Date: Aug 2008 Location: inside ProASIC3 Posts: 366 Member: 833635 Status: Offline Sonork: 100.1578967 Thanks Meter: 604	You have problems with N73? Or with all phones? NoooX-Team

10-21-2008, 09:18	#5 (permalink)
M_ALEX Freak Poster Join Date: Nov 2002 Location: Poland Age: 56 Posts: 144 Member: 17920 Status: Offline Thanks Meter: 10	I have problems with all phones. but N73 completly cant possible put in local mode. for others phones I must use external power together with cables from box. M_ALEX

10-21-2008, 13:52	#6 (permalink)
NoooX-Box Product Manager Join Date: Aug 2008 Location: inside ProASIC3 Posts: 366 Member: 833635 Status: Offline Sonork: 100.1578967 Thanks Meter: 604	Try to resolder phone connector on PCB. If it does not help you can contact me via sonork for more instructions. NoooX-Team

10-23-2008, 15:06	#7 (permalink)
M_ALEX Freak Poster Join Date: Nov 2002 Location: Poland Age: 56 Posts: 144 Member: 17920 Status: Offline Thanks Meter: 10	Hello I open this box and check..... and find two burned resistors R7, R8. Please tell me what are their values ?

10-23-2008, 16:02	#8 (permalink)
east51 Freak Poster Join Date: Oct 2004 Age: 44 Posts: 99 Member: 88552 Status: Offline Thanks Meter: 13	hello, "I open this box and check..... and find two burned resistors R7, R8. Please tell me what are their values " i have same problem i posted today http://rapidshare.de/files/40742435/noox.BMP.html http://rapidshare.de/files/40742432/nooox.JPG.html please give support east51

10-23-2008, 18:40	#11 (permalink)
east51 Freak Poster Join Date: Oct 2004 Age: 44 Posts: 99 Member: 88552 Status: Offline Thanks Meter: 13	problem solved by changing R7 and R8 http://rapidshare.de/files/40743741/new_R7_R8.BMP.html thx for quick support

10-23-2008, 19:54	#12 (permalink)
NoooX-Box Product Manager Join Date: Aug 2008 Location: inside ProASIC3 Posts: 366 Member: 833635 Status: Offline Sonork: 100.1578967 Thanks Meter: 604	Ok, here is the picture for the solution. NoooX-Team