Vodafone v710 how to unlock and user code - GSM-Forum

chiragp · 10-19-2008, 07:46

HERE R THE STEPS U CAN UNLCOK AND REMOVE USER CODE

CABLE SCHEMATIC

for unlock V710 is clip must be ver 3.6 and do this steps
1- connect phone to clip with wrong sim card inside
2- power on the phone
3- wait until phone keybad start have light
4- then press and release fast the unlock button
5- phone will freez for 1 sec then start work normal and ask code
6- enter 7777777777777777 ( 16 digit number 7 )
7- phone will ask u restart and will be unlocked
8- if phone restart after step 4 then remove battary from phone and return again try frm step 1

for read user code from v710
1-connect clip in normal mode to computer
2- open the upgrade software
3- press connect , and program will say clip connected and active read user code button
4- chose v710 model
5- connect phone to clip and switch phone on
6- once phone keybad have light then press read user code
7- program will display for u the user code

regards

Nonoyxp · 10-19-2008, 08:44

hehe...hope they will not copy..!!copying is same as stealing....just like pirated cd's...

maplegsm · 10-19-2008, 11:32

where is V710 cable schematic

BR

MapleGsm(umer)

Carlazos · 10-19-2008, 18:02

work with same cable first clip?

NADEEM GONDAL · 10-20-2008, 08:38

Quote:

Originally Posted by Carlazos

work with same cable first clip?

u can do but it would need little bit changes.

MrDevil · 10-20-2008, 10:29

And Vodafone V710 Unlocked with Success

Self Made Cable Lg Connector and A 10pin Rj45

Good work .

Thanks

chiragp · 10-20-2008, 10:32

@mr
always make post with full details with pic

keep it up

c_ahmad79 · 10-23-2008, 18:54

i have problem with user code
i got this phone for unlock but there is password active
here is the log and screenshopt of the software
Searching clip...
Clip connected...
Reading log...
Factory usercode: 0000
Log readed...
but mobile not accept the code
error contrasena tlfno
can any one explain me wot is this earror

kin88 · 10-23-2008, 19:15

i have make cable experient 10 years , i make a v710 cable sure correct , but no luck , anytime error , please master follow it

MrDevil · 10-23-2008, 22:01

Quote:

Originally Posted by chiragp

@mr
always make post with full details with pic

keep it up

I have problem with my camera but i should do Screen capture ,
Anyway i'll do for sure next time.

Thanks bro,
Witing some more World First

Take care

adebam · 10-23-2008, 22:15

i don't know if someone has successfully unlocked this phone( v710),cos i made the cable accordinglly with cable schematic given by chiragp, but failed to power on with this schemstic,i believe if someone has unlocked this phone, there must be some changes he made to the cable against the schematic given. i used a 10 pin rj45 cable from my old champion box, and a 24pin lg cable and follow the schematic relegiously, but phone failed to power on when the cable is connected to the box. if any one has a solution to this or an observation, kindly let us know here. thanks
Adebam

MrDevil · 10-23-2008, 23:14

Quote:

Originally Posted by adebam

i don't know if someone has successfully unlocked this phone( v710),cos i made the cable accordinglly with cable schematic given by chiragp, but failed to power on with this schemstic,i believe if someone has unlocked this phone, there must be some changes he made to the cable against the schematic given. i used a 10 pin rj45 cable from my old champion box, and a 24pin lg cable and follow the schematic relegiously, but phone failed to power on when the cable is connected to the box. if any one has a solution to this or an observation, kindly let us know here. thanks
Adebam

chiragp · 10-24-2008, 07:01

Quote:

Originally Posted by adebam

i don't know if someone has successfully unlocked this phone( v710),cos i made the cable accordinglly with cable schematic given by chiragp, but failed to power on with this schemstic,i believe if someone has unlocked this phone, there must be some changes he made to the cable against the schematic given. I used a 10 pin rj45 cable from my old champion box, and a 24pin lg cable and follow the schematic relegiously, but phone failed to power on when the cable is connected to the box. If any one has a solution to this or an observation, kindly let us know here. Thanks
adebam

v710 cable ready in stock with all reseller try to contact

dont damage ur phone with r&d

b,r

MrDevil · 10-24-2008, 08:19

Is that difficult ?
that doesnt need 10 years in this field Just sharp eyes

NADEEM GONDAL · 10-24-2008, 10:16

Quote:

Originally Posted by MrDevil

Is that difficult ?
that doesnt need 10 years in this field Just sharp eyes

i think no sharp eyes.just normal eyes and sharp mind.

10-19-2008, 07:46	#1 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	Vodafone v710 how to unlock and user code HERE R THE STEPS U CAN UNLCOK AND REMOVE USER CODE CABLE SCHEMATIC for unlock V710 is clip must be ver 3.6 and do this steps 1- connect phone to clip with wrong sim card inside 2- power on the phone 3- wait until phone keybad start have light 4- then press and release fast the unlock button 5- phone will freez for 1 sec then start work normal and ask code 6- enter 7777777777777777 ( 16 digit number 7 ) 7- phone will ask u restart and will be unlocked 8- if phone restart after step 4 then remove battary from phone and return again try frm step 1 for read user code from v710 1-connect clip in normal mode to computer 2- open the upgrade software 3- press connect , and program will say clip connected and active read user code button 4- chose v710 model 5- connect phone to clip and switch phone on 6- once phone keybad have light then press read user code 7- program will display for u the user code regards Last edited by Vodafone_Star; 10-20-2008 at 05:33.

10-23-2008, 19:15	#9 (permalink)
kin88 Freak Poster Join Date: Jan 2004 Location: hong kong Age: 56 Posts: 400 Member: 51463 Status: Offline Sonork: 100.1596671 Thanks Meter: 29	cry cry i have make cable experient 10 years , i make a v710 cable sure correct , but no luck , anytime error , please master follow it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Text tribe GRL mobile of VOdafone Network How to Unlock >> [USER REQUEST]	Babyunlocker	PolarBox 3	5	01-03-2010 02:53
vodafone 902 how to unlock & user code reset??????	nakshatra	Various	0	08-02-2009 20:33
Nokia 6620 ..How to unlock a user code ?	Dany	Nokia Digital Core Technology 4 ( DCT-4 )	6	10-07-2005 05:35
How to unlock Eclipse USER CODE ?	PSG	Mitsubishi	1	07-16-2003 10:10
Does anyone know how to unlock the user-code for all siemens phones?	xpmobile	x1x to x45/x50	1	01-08-2002 07:49

10-19-2008, 08:44	#2 (permalink)
Nonoyxp No Life Poster Join Date: Apr 2005 Location: X-Sim Philippines Posts: 3,591 Member: 141973 Status: Offline Sonork: 100.1579084 Thanks Meter: 4,002	hehe...hope they will not copy..!!copying is same as stealing....just like pirated cd's...

10-19-2008, 11:32	#3 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	where is V710 cable schematic BR MapleGsm(umer)

10-19-2008, 18:02	#4 (permalink)
Carlazos Freak Poster Join Date: Dec 2003 Location: Spain Age: 41 Posts: 244 Member: 46247 Status: Offline Thanks Meter: 8	work with same cable first clip?

10-20-2008, 10:29	#6 (permalink)
MrDevil No Life Poster Join Date: Mar 2008 Posts: 733 Member: 732994 Status: Offline Thanks Meter: 81	And Vodafone V710 Unlocked with Success Self Made Cable Lg Connector and A 10pin Rj45 Good work . Thanks

10-20-2008, 10:32	#7 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	@mr always make post with full details with pic keep it up

10-23-2008, 22:15	#11 (permalink)
adebam No Life Poster Join Date: Sep 2005 Location: Nigeria, Oyo state Age: 48 Posts: 643 Member: 180091 Status: Offline Thanks Meter: 62	i don't know if someone has successfully unlocked this phone( v710),cos i made the cable accordinglly with cable schematic given by chiragp, but failed to power on with this schemstic,i believe if someone has unlocked this phone, there must be some changes he made to the cable against the schematic given. i used a 10 pin rj45 cable from my old champion box, and a 24pin lg cable and follow the schematic relegiously, but phone failed to power on when the cable is connected to the box. if any one has a solution to this or an observation, kindly let us know here. thanks Adebam

10-24-2008, 08:19	#14 (permalink)
MrDevil No Life Poster Join Date: Mar 2008 Posts: 733 Member: 732994 Status: Offline Thanks Meter: 81	Is that difficult ? that doesnt need 10 years in this field Just sharp eyes