Softbank 820P succesfully unlocked - GSM-Forum

freakyass · 08-31-2009, 18:47

use mode 3 and use usim aka 128kb cards only.

incoming call : ok
outgoing call : ok
incoming sms : ok
outgoing sms : ok
camera : not ok.

but i got a little trick, maybe it can help you.because i dont have here softbank cards still active well i can suggest you my opinion for making workin camera.
1. first read out MSISDN from softbank active cards ( mean that softbak sim that still got active network.)
2. make provisioning with this softbank cards in your till update your provisioning.
3. do not turn off your phone, pull out the battery and insert your 128kb cards togrther with rebel sim mode 3, but before you do that, make sure that you had write same MSISDN at your 128kb card with softbank active cards.
and power it on not more than 10 sec and i hope u can use your camera because the provisioning mode still workin at your phone.
4. i hope it works, and if someone here had tested it, please gimme result, regards.

n_bennyhk · 09-07-2009, 09:05

Quote:

Originally Posted by freakyass

use mode 3 and use usim aka 128kb cards only.

incoming call : ok
outgoing call : ok
incoming sms : ok
outgoing sms : ok
camera : not ok.

but i got a little trick, maybe it can help you.because i dont have here softbank cards still active well i can suggest you my opinion for making workin camera.
1. first read out MSISDN from softbank active cards ( mean that softbak sim that still got active network.)
2. make provisioning with this softbank cards in your till update your provisioning.
3. do not turn off your phone, pull out the battery and insert your 128kb cards togrther with rebel sim mode 3, but before you do that, make sure that you had write same MSISDN at your 128kb card with softbank active cards.
and power it on not more than 10 sec and i hope u can use your camera because the provisioning mode still workin at your phone.
4. i hope it works, and if someone here had tested it, please gimme result, regards.

Multimedia will work if rebelsim can let MSISDN set to Blank no matter what simcard in put inside with rebelsim on softbank phones?
As if can we will be able to unlock media like camera video for Softbank phones.
Hope theres a new firmware update soon. .....
Rebel Team why not look at the TMSI thing you can think of something to make the signal stay rite? That will be good for all who lost signal after few days

freakyass · 09-07-2009, 09:48

Quote:

Originally Posted by n_bennyhk

Multimedia will work if rebelsim can let MSISDN set to Blank no matter what simcard in put inside with rebelsim on softbank phones?
As if can we will be able to unlock media like camera video for Softbank phones.
Hope theres a new firmware update soon. .....
Rebel Team why not look at the TMSI thing you can think of something to make the signal stay rite? That will be good for all who lost signal after few days

as far as i know provisioning need gprs connection. so if you cant provisioning your phone you cant used multi media . ive been test for different softbank simcard, as long as sim got network, provisioning was ok and multi media can used well, but if simcard doesnt got signal, multi media is lock. hope they find how to bypass methode so we can used multi media for this phone. regards

n_bennyhk · 09-07-2009, 13:21

MSISDN needed for the softbank phones to read, if u key in in the simcard , u delete the MSISDN on softbank phone, the phone will be lock again.
Panasonic phones will be slightly different from sharp phones
i tested 923sh, 932sh 933sh, 934sh,936sh all ok if we run gprs with the hypersim and blank MSISDN .

Call in out ok under 2g
SMS in out ok under 2g
Call out ok under 3g, incoming fail reported phone off
SMS out ok under 3g, SMS in fail

Team please look into TMSI , cos it will help us in loss signal. Hope the team will notice this , its been tested by other cards it works and also 3g iincoming also solve from other card.(xxxx card)

08-31-2009, 18:47	#1 (permalink)
freakyass No Life Poster Join Date: Jun 2005 Location: insane in da mad brain Age: 35 Posts: 547 Member: 154522 Status: Offline Thanks: 9 Thanked 48 Times in 33 Posts	Softbank 820P succesfully unlocked use mode 3 and use usim aka 128kb cards only. incoming call : ok outgoing call : ok incoming sms : ok outgoing sms : ok camera : not ok. but i got a little trick, maybe it can help you.because i dont have here softbank cards still active well i can suggest you my opinion for making workin camera. 1. first read out MSISDN from softbank active cards ( mean that softbak sim that still got active network.) 2. make provisioning with this softbank cards in your till update your provisioning. 3. do not turn off your phone, pull out the battery and insert your 128kb cards togrther with rebel sim mode 3, but before you do that, make sure that you had write same MSISDN at your 128kb card with softbank active cards. and power it on not more than 10 sec and i hope u can use your camera because the provisioning mode still workin at your phone. 4. i hope it works, and if someone here had tested it, please gimme result, regards.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
730SC softbank samsung succesfully unlock	lilong_lee	UST Pro II	7	10-03-2009 05:10
SOFTBANK 904T succesfully unlock	freakyass	Rebel SIM Card	3	09-04-2009 16:31
Softbank 820p to unlock-is it support?	zonetrichur	UST Pro II	2	07-17-2009 11:29
softbank 820p	firstpharaon	Panasonic	1	04-16-2008 05:57
softbank 820p	firstpharaon	Panasonic	3	03-12-2008 20:33

09-07-2009, 13:21	#4 (permalink)
n_bennyhk Insane Poster Join Date: Apr 2004 Posts: 89 Member: 63782 Status: Offline Thanks: 0 Thanked 5 Times in 4 Posts	MSISDN needed for the softbank phones to read, if u key in in the simcard , u delete the MSISDN on softbank phone, the phone will be lock again. Panasonic phones will be slightly different from sharp phones i tested 923sh, 932sh 933sh, 934sh,936sh all ok if we run gprs with the hypersim and blank MSISDN . Call in out ok under 2g SMS in out ok under 2g Call out ok under 3g, incoming fail reported phone off SMS out ok under 3g, SMS in fail Team please look into TMSI , cos it will help us in loss signal. Hope the team will notice this , its been tested by other cards it works and also 3g iincoming also solve from other card.(xxxx card)