ERROR: Cannot detect phone on FBUS interface - GSM-Forum

mobilemods · 11-06-2008, 13:09

Hi

Wonder if anybody can help i have the bb5 box with the king update and i bought the new cables
But when i try to connect phone all i get is .

Connecting to BB5 Box ...
Searching for phone ...
ERROR: Cannot detect phone on FBUS interface

Any help Would be great

greenpoint · 11-06-2008, 13:50

U must change cable ! I have 3 pieces cables for each model. I recommend universal cables FBUS. B.R

mobilemods · 11-06-2008, 14:50

Where do i get these cables from

HYPERCELL · 11-06-2008, 17:57

The same problem, i have the cables from nbox and the bb5 cable and don't connect with my bb5box anyone, i tried with another cables and the problem persist, please help us

boucettay · 11-06-2008, 20:28

Quote:

Originally Posted by mobilemods

Hi

Wonder if anybody can help i have the bb5 box with the king update and i bought the new cables
But when i try to connect phone all i get is .

Connecting to BB5 Box ...
Searching for phone ...
ERROR: Cannot detect phone on FBUS interface

Any help Would be great

did u try other phones, perhaps is ur phone, try to clean connector

from your log it seems that u r connecting fbus cable in bb5box...if it s the case, box will never detect phone
give more details of connection how u do, cable<----->box<----->phone

BR

delchoni · 11-06-2008, 20:32

dear brothers first if you need bb5king soft detected ufs or jaf interfeice then use corect work fbus cable need phone in local mode

after this now unlock youhr phone

hitibiti · 11-06-2008, 20:49

what about this problem :

CHK log :

Quote:

Searching for JAF box ...
JAF box detected
JAF box ATmega firmware version: 1B0
Initialize JAF box ...
JAF box JAFBOX_BB5_FLASH_bb5challenge ...

ASIC ID: 000000010000022600010006010C192101001101
HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Operation time: 00:02.
Successfully done.
Thread phone exit.

when i try to do unlock:

Quote:

JAF box ATmega firmware version: 1B0
Searching for phone ...
ERROR: Cannot detect phone on FBUS interface
Operation time: 00:08.
Done with error(s).
Thread phone exit.

i use V 1.01

hitibiti · 11-06-2008, 21:04

Quote:

Originally Posted by [c]Cinek

What phone model is it ?

And try too read info by jaf SW is it working ?

Nokia 6131 RM115
V3.72

with jaf yes work well

arturo79 · 11-06-2008, 23:14

mabe sw is too slow, why don't u trai to make it at least v5.60, or higher ?

m_naeem · 11-06-2008, 23:24

Quote:

Originally Posted by mobilemods

Hi

Wonder if anybody can help i have the bb5 box with the king update and i bought the new cables
But when i try to connect phone all i get is .

Connecting to BB5 Box ...
Searching for phone ...
ERROR: Cannot detect phone on FBUS interface

Any help Would be great

i also have same problem with 6280 and n80..

imd · 11-07-2008, 01:42

i have same problem i tried 3 differnet model phones 3 different cable no Cannot detect phone on FBUS interface still no joy witth bb5 box for unlock without tp and help with issue

asson · 11-25-2008, 09:40

Same problem with mine too, UFS box. tried with 2 phones.
Any soulution?

enzawigroup · 11-25-2008, 09:51

Quote:

Originally Posted by asson

Same problem with mine too, UFS box. tried with 2 phones.
Any soulution?

before u do anything with cinek

- U must Connect Phone with Fbus Cable
- Open JAF soft on the BB5 tab
- Don't Select flash files and hit flash
- if it can make PM & RPL backup then go for Cinek
- if JAF Can't make PM or RPL backup then 1st CHECK ur Fbus Cable and Modify it.

10k value Resister on BSI is Best value for almost all BB5.

Happy Unlocking

asson · 11-25-2008, 10:21

And I do have a Universal fbus cable.

asson · 11-25-2008, 10:31

Quote:

Originally Posted by enzawigroup

before u do anything with cinek

- U must Connect Phone with Fbus Cable
- Open JAF soft on the BB5 tab
- Don't Select flash files and hit flash
- if it can make PM & RPL backup then go for Cinek
- if JAF Can't make PM or RPL backup then 1st CHECK ur Fbus Cable and Modify it.

10k value Resister on BSI is Best value for almost all BB5.

Happy Unlocking

I don't have the JAF box.

11-06-2008, 13:09	#1 (permalink)
mobilemods Junior Member Join Date: Jul 2007 Posts: 21 Member: 554512 Status: Offline Thanks: 3 Thanked 0 Times in 0 Posts	ERROR: Cannot detect phone on FBUS interface Hi Wonder if anybody can help i have the bb5 box with the king update and i bought the new cables But when i try to connect phone all i get is . Connecting to BB5 Box ... Searching for phone ... ERROR: Cannot detect phone on FBUS interface Any help Would be great

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6280 ?ERROR: Cannot detect phone on FBUS interface	AjeeB	BB5BOX	5	11-20-2007 09:31
ERROR: Cannot detect phone on FBUS interface	gsm_connections	BB5BOX	11	10-24-2007 21:04
ERROR: Cannot detect phone on FBUS interface	dexter3x	BB5BOX	7	10-23-2007 09:31
5200-ERROR: Cannot detect phone on FBUS interface	neluturap	BB5BOX	5	10-11-2007 19:59
ERROR: Cannot detect phone on FBUS interface	bd electronics	BB5BOX	2	10-09-2007 21:14

11-06-2008, 13:50	#2 (permalink)
greenpoint Junior Member Join Date: Oct 2008 Location: Northern Poland Posts: 17 Member: 878270 Status: Offline Thanks: 0 Thanked 2 Times in 3 Posts	U must change cable ! I have 3 pieces cables for each model. I recommend universal cables FBUS. B.R

11-06-2008, 14:50	#3 (permalink)
mobilemods Junior Member Join Date: Jul 2007 Posts: 21 Member: 554512 Status: Offline Thanks: 3 Thanked 0 Times in 0 Posts	Where do i get these cables from

11-06-2008, 17:57	#4 (permalink)
HYPERCELL Junior Member Join Date: Apr 2008 Posts: 5 Member: 747263 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	The same problem, i have the cables from nbox and the bb5 cable and don't connect with my bb5box anyone, i tried with another cables and the problem persist, please help us

11-06-2008, 20:32	#6 (permalink)
delchoni No Life Poster Join Date: Mar 2006 Location: Bulgaria Asenovgrad Age: 31 Posts: 3,136 Member: 239176 Status: Offline Sonork: 100.1602815 Thanks: 2,098 Thanked 856 Times in 425 Posts	dear brothers first if you need bb5king soft detected ufs or jaf interfeice then use corect work fbus cable need phone in local mode after this now unlock youhr phone

11-06-2008, 23:14	#9 (permalink)
arturo79 Freak Poster Join Date: Aug 2007 Posts: 311 Member: 567925 Status: Offline Thanks: 97 Thanked 15 Times in 11 Posts	mabe sw is too slow, why don't u trai to make it at least v5.60, or higher ?

11-07-2008, 01:42	#11 (permalink)
imd Freak Poster Join Date: Jan 2006 Posts: 100 Member: 226909 Status: Offline Thanks: 14 Thanked 4 Times in 4 Posts	i have same problem i tried 3 differnet model phones 3 different cable no Cannot detect phone on FBUS interface still no joy witth bb5 box for unlock without tp and help with issue

11-25-2008, 09:40	#12 (permalink)
asson Freak Poster Join Date: Aug 2008 Posts: 341 Member: 846872 Status: Offline Thanks: 200 Thanked 107 Times in 41 Posts	Same problem with mine too, UFS box. tried with 2 phones. Any soulution?

11-25-2008, 10:21	#14 (permalink)
asson Freak Poster Join Date: Aug 2008 Posts: 341 Member: 846872 Status: Offline Thanks: 200 Thanked 107 Times in 41 Posts	And I do have a Universal fbus cable.