GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 09-11-2009, 04:18   #1 (permalink)
No Life Poster
 
karwos's Avatar
 
Join Date: Feb 2005
Location: Poland
Age: 28
Posts: 4,944
Member: 117496
Status: Offline
Sonork: 100.83919
Thanks Meter: 22,714
Angry 11-09-2009 Cyclone HOT - Asic 3168 - 7100,2323,2330,2720 -FREE UNLOCKING Ready!


Hi,
Bulk update 11-09-2009 for Cyclone Box is READY.

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.

Download link: http://rapidshare.com/files/27837846...te11092009.exe

How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:
Quote:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,97v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work
How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:

Quote:
Started Super DCT4 Activation at 03:45:20
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 4F67674F5428157448CEACEB547BC575
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Super DCT4 Activated Successfully! Credits Left: 950
Please, replug your box from USB now, and use Maintenance Function to upgrade it again.
After next upgrade, box will be activated for Super DCT4 Functions!
As message says, replug your box and re-upgrade it again. After re-upgrade your box is SUPER-DCT4-READY

Quote:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,98v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,96v PASSED
VBAT Voltage 4,93v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
For who Likes videos here the video about how to activate, once installed the last bulk update, the Super DCT4 (Thanks TopComGSM)
http://www.4shared.com/file/13185302...r_dct4_ok.html

And here is some unlocked phones...

Quote:
MCU Version V 06.31
MCU Date 24-03-09
Product RM-438
Manufacturer (c) Nokia
IMEI 356791022371169
Mastercode 725723337
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-438_V 06.31.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 841F1AFABBAFF9CCECE9143110
MSID-Plain: 2C40BAE9004D1547A8000000
FAID-Crypted: 49676CAD5E5871D32474F41B
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01C00000-0x01C1FFFF]
Erase taken 4.625s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 3.109s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature D8E30AAEFA78CD56
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553567910223711600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (C1B065BFEB7F7F6E4ADE043BDEF28AFF433AFCBE)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Quote:
MCU Version V 57.20
MCU Date 09-02-09
Product RM-298
Manufacturer (c) Nokia
IMEI 359560015082365
Mastercode 4711427143
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-298_V 57.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020881C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x0020881C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020881C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 84BF9D8E695715F78638B733B0
MSID-Plain: 2C40BAE90016370AA9000000
FAID-Crypted: A3DD17B2526DBD2FB3CDBAED
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x013E0000-0x013FFFFF]
Erasing NOR Region [0x01480000-0x0149FFFF]
Erasing NOR Region [0x016C0000-0x016DFFFF]
Erasing NOR Region [0x01C20000-0x01C3FFFF]
Erase taken 2.141s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 20.750s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 7969BC800C852B5B
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553595600150823600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (EA251E362B1C5BEC9D9128151B64D19173B31B78)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Quote:
MCU Version V 08.20
MCU Date 30-06-09
Product RM-512
Manufacturer (c) Nokia
IMEI 356911035333218
Mastercode 76526175
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-512_V 08.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 84049DEF3E46EBDCAFB36F38E6
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: A9E2206DCDF87F867EDCD4D9
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01CE0000-0x01CFFFFF]
Erase taken 3.359s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 36.94s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 9D213E0BB6FC7D27
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553569110353332100
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (9D991119D205D01F82D6144491ED7788675CB5B2)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Best Regards,
Cyclone Team.

(more to come )

Last edited by moulnisky; 09-11-2009 at 10:04.
 
The Following 258 Users Say Thank You to karwos For This Useful Post:
Show/Hide list of the thanked
Old 09-11-2009, 04:23   #2 (permalink)
Freak Poster
 
Join Date: May 2005
Posts: 307
Member: 145289
Status: Offline
Thanks Meter: 35
Keep on great job! What I can say more.. Just need to add some more models/versions Read your icq/sonork messeges

Last edited by hakkothebest; 09-11-2009 at 04:29.
 
The Following 3 Users Say Thank You to hakkothebest For This Useful Post:
Show/Hide list of the thanked
Old 09-11-2009, 04:30   #3 (permalink)
Freak Poster
 
sam3578's Avatar
 
Join Date: Jul 2007
Location: murtha
Posts: 406
Member: 540170
Status: Offline
Thanks Meter: 96
anyone who had it please upload to the other link...
 
Old 09-11-2009, 04:43   #4 (permalink)
Freak Poster
 
Join Date: Jul 2005
Posts: 361
Member: 158999
Status: Offline
Thanks Meter: 41
Quote:
Originally Posted by Cyclonebox View Post
Hi,
Bulk update 11-09-2009 for Cyclone Box is READY.

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.

Download link: http://rapidshare.com/files/27837846...te11092009.exe

How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:


How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:



As message says, replug your box and re-upgrade it again. After re-upgrade your box is SUPER-DCT4-READY



And here is some unlocked phones...







Best Regards,
Cyclone Team.

(more to come )
friend 2610 rh86 7.04a unlock???
 
The Following User Says Thank You to justincel For This Useful Post:
Old 09-11-2009, 04:46   #5 (permalink)
Freak Poster
 
pathfinder333's Avatar
 
Join Date: Jan 2009
Location: X-Sol
Posts: 348
Member: 954575
Status: Offline
Thanks Meter: 244
VERY GOOD UPDATE CYCLONE TEAM...

but the link is error...

can you check it?????
 
Old 09-11-2009, 04:48   #6 (permalink)
No Life Poster
 
Join Date: Aug 2007
Age: 36
Posts: 1,010
Member: 572549
Status: Offline
Thanks Meter: 172
thats a big bomb.. hope 2610b rh87 7.04a add next update.............
 
The Following 2 Users Say Thank You to T0T0 For This Useful Post:
Old 09-11-2009, 04:52   #7 (permalink)
No Life Poster
 
kungpaoski's Avatar
 
Join Date: Aug 2006
Location: Philippines
Posts: 688
Member: 329609
Status: Offline
Thanks Meter: 245
great update !!!!!!!


is this patch unlock or permanent unlock?

T
b.r.

Last edited by kungpaoski; 09-11-2009 at 05:00.
 
The Following User Says Thank You to kungpaoski For This Useful Post:
Old 09-11-2009, 04:53   #8 (permalink)
No Life Poster
 
toutou_gsm's Avatar
 
Join Date: Nov 2007
Location: inside nck
Posts: 3,886
Member: 628112
Status: Offline
Sonork: 100.1589052
Thanks Meter: 3,721
thanks cyclonebox team for the bomb update,first in the world standalone solution for 3168 based phones


many thanks

@siroya,

please need update for nokia 1661 dct4+

hope very soon

regards,

toutou_gsm
 
The Following 5 Users Say Thank You to toutou_gsm For This Useful Post:
Show/Hide list of the thanked
Old 09-11-2009, 05:06   #9 (permalink)
Freak Poster
 
sam3578's Avatar
 
Join Date: Jul 2007
Location: murtha
Posts: 406
Member: 540170
Status: Offline
Thanks Meter: 96
other link try this one CLICK ME
 
The Following 9 Users Say Thank You to sam3578 For This Useful Post:
Show/Hide list of the thanked
Old 09-11-2009, 05:08   #10 (permalink)
Freak Poster
 
Join Date: Apr 2007
Posts: 264
Member: 495352
Status: Offline
Sonork: 100.1589707
Thanks Meter: 70
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000XXX
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D1000XXX
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.99v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work

MY CREDITS WAS LOST 50
BUT DCT4 STILL NOT ACTIVATED, HELP SIR
RECONNECT BOX STILL SAME


Started credits checking procedure at 10:06:23 AM
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: C640739D8AE16BADE4C83F5B967A816A
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Credits: 71


Started credits checking procedure at 10:00:02AM
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: C640739D8AE16BADE4C83F5B967A816A
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Credits: 21

PLEASE RECHECKING ON SERVER
 
The Following User Says Thank You to G_TRON84 For This Useful Post:
Old 09-11-2009, 05:10   #11 (permalink)
No Life Poster
 
MARCO_LEI24's Avatar
 
Join Date: Jan 2007
Location: republic of china
Posts: 723
Member: 437292
Status: Offline
Sonork: 100.1583093
Thanks Meter: 270
nice update but why i cant uactivate my box

heres the error

Quote:
Started Super DCT4 Activation at 11:15:45 AM
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: E450F628AC26CC3C7EE0221BCF6D5019
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Cyclone Server Send Command Error -> Code: 500, Box is already activated for Super DCT4!

Failed to Activate Super DCT4 -> Server transaction failed
 
The Following User Says Thank You to MARCO_LEI24 For This Useful Post:
Old 09-11-2009, 05:14   #12 (permalink)
No Life Poster
 
Join Date: Aug 2007
Age: 36
Posts: 1,010
Member: 572549
Status: Offline
Thanks Meter: 172
Quote:
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 63897BA0AF0B172F40036AB45506B611
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Cyclone Server Send Command Error -> Code: 500, Box is already activated for Super DCT4!

Failed to Activate Super DCT4 -> Server transaction failed
me too can't activate, Its server busy?
 
Old 09-11-2009, 05:15   #13 (permalink)
No Life Poster
 
toutou_gsm's Avatar
 
Join Date: Nov 2007
Location: inside nck
Posts: 3,886
Member: 628112
Status: Offline
Sonork: 100.1589052
Thanks Meter: 3,721
Quote:
Originally Posted by MARCO_LEI24 View Post
nice update but why i cant uactivate my box

heres the error
very simple,already activated for super dct4 also must upgarde to latest version




regards,
 
The Following 2 Users Say Thank You to toutou_gsm For This Useful Post:
Old 09-11-2009, 05:17   #14 (permalink)
No Life Poster
 
SiRoYa's Avatar
 
Join Date: Oct 2002
Age: 34
Posts: 8,377
Member: 16107
Status: Offline
Sonork: 100.58402
Thanks Meter: 26,419
AFTER ACTIVATION
YOU NEED TO UPDATE YOUR BOX FIRMWARE to 1.07
 
The Following 18 Users Say Thank You to SiRoYa For This Useful Post:
Show/Hide list of the thanked
Old 09-11-2009, 05:17   #15 (permalink)
No Life Poster
 
windman8's Avatar
 
Join Date: Oct 2007
Location: CYCLONE IS THE BEST TOOL FOR N
Posts: 797
Member: 614801
Status: Offline
Thanks Meter: 133
sir siroya pls give another link sir,give error to me
 
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
11-09-2009 Cyclone HOT - Asic 3168 - 7100,2323,2330,2720 FREE UNLOCKING Ready! SiRoYa Service Products News & Updates 0 09-11-2009 04:34

 



All times are GMT +1. The time now is 12:55.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.52157 seconds with 8 queries

SEO by vBSEO