Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Cyclonebox
Reload this Page 6120c unlock failed with new update of cyclone
Register FAQDonate Forum Rules ★. iPhone Unlock .★ -= JTAG BOOM =- .: Nokia Unlock :. Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old 01-25-2010, 08:44   #1 (permalink)
Freak Poster
 
Join Date: Sep 2005
Age: 39
Posts: 295
Member: 178616
Status: Offline
Thanks: 126
Thanked 76 Times in 38 Posts
Arrow 6120c unlock failed with new update of cyclone
today i try on new update from cyclone team and unlock 6120c and not successful plz help cyclone team????
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC003000400121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: PM Security Block Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
BB5 Unlock Failed -> Simlock Array not found in PM 308, this is critical
  Reply With Quote
Old 01-25-2010, 08:48   #2 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
You must use the new nck code calculation

BR

Alex
  Reply With Quote
Old 01-25-2010, 09:10   #3 (permalink)
No Life Poster
 
3stanGsm's Avatar
 
Join Date: Aug 2006
Location: Phils
Posts: 2,217
Member: 331390
Status: Offline
Thanks: 1,613
Thanked 447 Times in 240 Posts
Quote:
Originally Posted by moulnisky View Post
You must use the new nck code calculation

BR

Alex
But why? this is a OLD BB5..isn't?
  Reply With Quote
Old 01-25-2010, 09:13   #4 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
6120c is rapido sl2 hash CAEE.. the NCK calculation is available since ages.. he selected the unlock via PM308 recalculation

BR

Alex
  Reply With Quote
The Following User Says Thank You to moulnisky For This Useful Post:
Old 01-25-2010, 10:07   #5 (permalink)
Freak Poster
 
Join Date: Sep 2005
Age: 39
Posts: 295
Member: 178616
Status: Offline
Thanks: 126
Thanked 76 Times in 38 Posts
Arrow nck calculation new method give also error
dear i also use this method but get same error plz help me ?i upgrade main firmware but software give error why?
Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.8340
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.16, (Jan 25 2010 02:27:03, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application
Box Serial Number: C0000E38
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk01 / wk06
Initializing security card...
Card Serial Number: D20000A0
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	4.95v	PASSED
MCU Voltage	3.28v	PASSED
Core Voltage	1.77v	PASSED
VBAT Voltage	0.76v	PASSED
VBAT Voltage	4.90v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.83v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.02v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
BB5 Unlock Started...
MCU Version	V 06.01
MCU Date	02-09-08
Product		RM-243
Manufacturer	(c) Nokia
IMEI		358641016970385
Mastercode	715514723
Warning: Failed to read SP Info, Assuming defaults
Simlock Server	SIMLOCK SERVER
Simlock Key	0000000000000000
Simlock Profile	
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC003000400121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
BB5 Unlock Failed -> Failed to Read NCK Codes, Possibly: 1) Your PM308 is damaged (subblock DEAD0400), 2) Decryption not running (new rom?), 3) Cyclone Box Firmware is not upgraded! (must be >= v01.16)
BB5 Unlock Started...
MCU Version	V 06.01
MCU Date	02-09-08
Product		RM-243
Manufacturer	(c) Nokia
IMEI		358641016970385
Mastercode	715514723
Warning: Failed to read SP Info, Assuming defaults
Simlock Server	SIMLOCK SERVER
Simlock Key	0000000000000000
Simlock Profile	
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC003000400121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (old method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
BB5 Unlock Failed -> Failed to get Lock Key (6, 5)
BB5 Unlock Started...
MCU Version	V 06.01
MCU Date	02-09-08
Product		RM-243
Manufacturer	(c) Nokia
IMEI		358641016970385
Mastercode	715514723
Warning: Failed to read SP Info, Assuming defaults
Simlock Server	SIMLOCK SERVER
Simlock Key	0000000000000000
Simlock Profile	
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC003000400121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1140010552830058085C2225BF0A9E7BB7EFC581
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
BB5 Unlock Failed -> Failed to Read NCK Codes, Possibly: 1) Your PM308 is damaged (subblock DEAD0400), 2) Decryption not running (new rom?), 3) Cyclone Box Firmware is not upgraded! (must be >= v01.16)
Last edited by ptt; 01-25-2010 at 13:22. Reason: add code tag
  Reply With Quote
Old 01-25-2010, 10:24   #6 (permalink)
Freak Poster
 
golden_gsm's Avatar
 
Join Date: Aug 2002
Posts: 365
Member: 14481
Status: Offline
Thanks: 56
Thanked 34 Times in 20 Posts
Cyclone Box Firmware is not upgraded! (must be >= v01.16).Update your box firmware.
  Reply With Quote
Old 01-25-2010, 10:28   #7 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
Could you post, please, the infos of this mobile?

BR

Alex
  Reply With Quote
Old 01-25-2010, 10:32   #8 (permalink)
Freak Poster
 
Join Date: Sep 2005
Age: 39
Posts: 295
Member: 178616
Status: Offline
Thanks: 126
Thanked 76 Times in 38 Posts
Arrow here is phone info
MCU Version V 06.01
MCU Date 02-09-08
Product RM-243
Manufacturer (c) Nokia
IMEI 358641016970385
Mastercode 715514723
IMEI Spare 3A85460161793008
IMEI SV 3385460161793048F2000000
PPM 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PSN MIH117589
Product Code 0547930
Basic Product Code 0539292
PSD 0000000000000000
LPSN 0
APE SW 06.01
APE Variant rofs_version_inforofx_version_info
APE Test rm243_ENO_x_2007wk24v0.01
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0602i06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PCI i06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UEM 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UPP 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
RFIC 17141715
DSP 06w41pb_08w28.0.1_rm243
LCD 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
BT 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP Sw 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP DevID 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP RevID 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
AEM 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Flip MCUSW 06.01j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Failed to read info -> Failed to read SP info
  Reply With Quote
Old 01-25-2010, 10:34   #9 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
This mobile doesn't need an unlock, it needs the Simlock rebuild.. this is why you can't unlock it.. Do the Simlock RPL and it will be fine

BR

Alex
  Reply With Quote
Old 01-25-2010, 19:10   #10 (permalink)
Freak Poster
 
Join Date: Jun 2008
Location: Saudi Arabia
Posts: 261
Member: 784971
Status: Offline
Sonork: tech4ksa
Thanks: 61
Thanked 22 Times in 21 Posts
Sir hav a same problm 6120c "Failed to read SP info" cnt unlock it how can fix the pro pls help with some screen shot ?
  Reply With Quote
Old 01-25-2010, 19:17   #11 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
just thick rpl calculation and click on unlock (it needs a credit balance of at least 101 credits)

BR

Alex
  Reply With Quote
Old 01-25-2010, 19:29   #12 (permalink)
Freak Poster
 
Join Date: Jun 2008
Location: Saudi Arabia
Posts: 261
Member: 784971
Status: Offline
Sonork: tech4ksa
Thanks: 61
Thanked 22 Times in 21 Posts
Sir how can buy credits mor than 100 or not possible free method ?
  Reply With Quote
Old 01-25-2010, 19:35   #13 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
just see how many credit you have left in you balance..
you need more then 101.. just buy the package needed to reach it or a bit bigger to use with the new functions which will be added shortly
You can buy them online here
http://www.karwos.hk/
remember to put the serial number of your box (the one you get when you open the DCT4/WD2/BB5 tab).

BR

Alex
  Reply With Quote
Old 01-25-2010, 20:11   #14 (permalink)
Freak Poster
 
Join Date: Jun 2008
Location: Saudi Arabia
Posts: 261
Member: 784971
Status: Offline
Sonork: tech4ksa
Thanks: 61
Thanked 22 Times in 21 Posts
Thax for advc moulnisky
  Reply With Quote
Old 01-25-2010, 20:12   #15 (permalink)
Super Moderator
 
moulnisky's Avatar
 
Join Date: Jan 2009
Location: England
Age: 48
Posts: 14,837
Member: 947561
Status: Offline
Thanks: 2,688
Thanked 11,374 Times in 4,991 Posts
You are wellcome my friend

BR

Alex
  Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
6120c Unlock failed with Zulea 2.01 wsw243 Nokia Base Band 5 ( BB-5 ) 1 06-22-2009 05:06
v550 unlock failed aftre new update llcoolr Smart-Clip 2 07-19-2008 16:44


All times are GMT +1. The time now is 04:38.

Contact Us - GSM-Forum by zfrank - Archive - Top


Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.37197 seconds with 11 queries

SEO by vBSEO