6301 contact service
 

first i sx4 auth & wrote modified pm, no luck
2d i erased the phone, flashed it then wrote back bucked rpl & 308 cer, the result was negative
the phone's version is 4.61
by the way before i started i bucked up full pm, rpl & field 308
her's the log


FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.61
15-10-07
RM-322
(c) Nokia
HW version: 1000
PCI version:
RFIC version:  17211721
DSP version: 07w15pb_07w39
LCD version: SEIKO
PPM version: V 04.61
15-10-07
RM-322
(c) Nokia
C
BT MCM version: 2222-101B
Retu version: 32
Tahvo version: 53
Content Pack version: Content: c_fr
V 04.61
15-10-07
RM-322
(c) Nokia

Production serial number: KDP902497
Product code: 0556960
Module code: 0203479
Basic production code: 0549083
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358983010366602
IMEI spare to net: 3A 85 89 03 01 63 66 00
IMEI SV to net: 33 85 89 03 01 63 66 00 F9

LOCK STATUS:

CONFIG KEY: 8000000000000000
PROVIDER KEY: 2140300000000000
Provider: Retevision Movil Amena;Spain
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 21403F

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-322.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0556960
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-322\

any idea how to fix this guys

post here phone self tests

Please, infos and self test made using Cyclone....

BR

Alex

here's the info using cyclonebox


MCU Version V 04.61
MCU Date 15-10-07
Product RM-322
Manufacturer (c) Nokia
IMEI 358983010366602
Mastercode 650304473
IMEI Spare 3A85890301636600
IMEI SV 3385890301636600F9000000
PPM V 04.61, 15-10-07, RM-322, (c) Nokia , C
CNT Content: c_fr, V 04.61, 15-10-07, RM-322, (c) Nokia ,
PSN KDP902497
Product Code 0556960
Module Code 0203479
Basic Product Code 0549083
PSD 0000000000000000
LPSN 0
WLAN MAC 001DFDCE0A64
RETU 32
TAHVO 53
AHNE 11
HW 1000
RFIC 17211721
DSP 07w15pb_07w39
LCD SEIKO
BT 2222-101B
Simlock Server SIMLOCK SERVER
Simlock Key 2140300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21403F






Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SLEEP_X_LOOP_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_KEYBOARD_STUCK_TEST
Failed ST_CAMERA_IF_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_LCD_TEST
Passed ST_LPRF_IF_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_RADIO_TEST
Passed ST_BACKLIGHT_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Failed ST_BT_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_TAHVOINT_TEST
Passed ST_SLEEPCLK_FREQ_TEST
Passed ST_BTEMP_TEST
Passed ST_BT_SLEEP_CLK_TEST
Passed ST_WLAN_TEST
Passed ST_BT_WLAN_COEXISTENCE_TEST
Passed ST_IIC_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_IQ_TEST
Passed ST_CDSP_TXC_DATA_TEST
Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed ST_CDSP_GSM_TX_POWER_TEST
Selftests done, Tests total: 34, Tests passed: 32, Tests not passed: 2

looks like an hardware problem.. software side is ok...

BR

Alex

when i erase the phone & flash it to 9.40 it turns on fine;no contact service. but after i write rpl, contact service shows up again.

You should write the RPL, doing the sx4 authorize (not the sx4 bypass) and write the full PM without the PM308.

are you following these steps?

BR

Alex