7370 can't unlock and can't read simlock status with cyclone box !! - GSM-Forum

wgmmmx · 05-17-2009, 08:24

Like in topic I try and can't

All initialized - Ready to work
MCU Version V 04.13
MCU Date 16-05-06
Product RM-70
Manufacturer (c) Nokia.
IMEI 351882013638131
Mastercode 626761264
IMEI Spare 3A15880231361803
IMEI SV 3315880231361803F6000000
PPM V 04.13, 16-05-06, RM-70, (c) Nokia., B
CNT Content: era_pl_cool, V 04.13, 16-05-06, RM-70, (c) Nokia.,
PSN CEF938931
Product Code 0540014
Module Code 0202645
Basic Product Code 0521585
PSD 0000001700000000
RETU 32
TAHVO 52
AHNE 11
HW 6001
RFIC 17191719
DSP dsp_soho_05w32v20.1
LCD SEIKO
Failed to read info -> Failed to read SP info
MCU Version V 04.13
MCU Date 16-05-06
Product RM-70
Manufacturer (c) Nokia.
IMEI 351882013638131
Mastercode 626761264
IMEI Spare 3A15880231361803
IMEI SV 3315880231361803F6000000
PPM V 04.13, 16-05-06, RM-70, (c) Nokia., B
CNT Content: era_pl_cool, V 04.13, 16-05-06, RM-70, (c) Nokia.,
PSN CEF938931
Product Code 0540014
Module Code 0202645
Basic Product Code 0521585
PSD 0000001700000000
RETU 32
TAHVO 52
AHNE 11
HW 6001
RFIC 17191719
DSP dsp_soho_05w32v20.1
LCD SEIKO
Failed to read info -> Failed to read SP info
BB5 Unlock Started...
MCU Version V 04.13
MCU Date 16-05-06
Product RM-70
Manufacturer (c) Nokia.
IMEI 351882013638131
Mastercode 626761264
Warning: Failed to read SP Info, Assuming defaults
BB5 Unlock Failed -> Initial SP corrupted or not a Baseband5 phone detected

with other box can read info without problem

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Initializing phone...
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Phone powered.
Reading Info...
Soft Version: V 04.13 Date: 16-05-06 Type: RM-70 (7370) Pack: (c) Nokia.
Product code: 0540014
Original IMEI: 351882-01-********
Production serial: CEF938931
HW Version: 6001
DSP Version: dsp_soho_05w32v20.1
LCD Version: SEIKO
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 62 [040A0105071B]
Profile bits: 8000000000000000
Simlock config: 2600200000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Closed; Data: 26002F
Security code: 23282

Pleasse fix this becouse for now can't unlock this phone with cyclone. I added PM backup maybe you see problem.

NADEEM GONDAL · 05-17-2009, 08:30

Tick SKIP SP INFO Reading
and Proceed Unlock then see what it says

wgmmmx · 05-17-2009, 08:34

But why not work read info ?? Why with old phone is problem ?? I unlocked phone with other box but I want to cyclone box fix problem !! !!

NADEEM GONDAL · 05-17-2009, 08:46

Will keep that Read INFO stuff in notice for next update

pethu · 05-17-2009, 08:48

plz check ur cable.open your cable and put 10k resister then do unlock. ur problem solved

NADEEM GONDAL · 05-17-2009, 08:56

cant say for cable problem least phone isin needed mode thats why iNFO is readed

wgmmmx · 05-17-2009, 10:08

Quote:

Originally Posted by pethu

plz check ur cable.open your cable and put 10k resister then do unlock. ur problem solved

Cabel is ok other box read phone ok and all time phone is in local mode like should be !! I not new in this bisnes and all time check cable and got working for every phones.

hasnain · 05-17-2009, 10:30

Always TRY to USE TMA ADOPTER if u got such error
that error are due to bad cable

BAD CABLE means not good fo cyclone box. different resistor value needed.

wgmmmx · 05-17-2009, 10:50

No this is not bad cable errror!! !! !!
I try to use UFC cable and try few resistror and all time the same then error is not from cable !! !! !! !! !! !! !! !! !! !! !! !! !! !! !!

NADEEM GONDAL · 05-17-2009, 12:26

i said above its not cable problem but some people wont Listen...
@wgmmmx
Mate a test read info with USB and see what it shows

karwos · 05-21-2009, 13:13

If there is problem with parsing sp info, or sp is corrupted itself (may happen),

just tick "skip sp read" during unlock !!!
And your phone will be unlocked anyway, no matter what sp status is .

Best regards !!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't flash with cyclone box	kaino147	Cyclonebox	3	09-19-2009 10:59
Help i can't unlock nokia e62 with cyclone box	edi21ar	Cyclonebox	5	07-25-2009 07:02
Can't Unlock and can't read flash my433v	said4	SMTi	1	05-20-2009 04:54
n95 code read done with cyclone box bad attampts was 5	yasermalik	Cyclonebox	6	04-27-2009 06:34
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box	FullFLASHgSMPH	Cyclonebox	2	04-13-2009 14:00

05-17-2009, 08:30	#2 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	Tick SKIP SP INFO Reading and Proceed Unlock then see what it says

05-17-2009, 08:34	#3 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 42 Posts: 2,097 Member: 137474 Status: Offline Sonork: 100.109924 Thanks Meter: 471	But why not work read info ?? Why with old phone is problem ?? I unlocked phone with other box but I want to cyclone box fix problem !! !!

05-17-2009, 08:46	#4 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	Will keep that Read INFO stuff in notice for next update

05-17-2009, 08:48	#5 (permalink)
pethu Freak Poster Join Date: Sep 2006 Location: india Posts: 302 Member: 345698 Status: Offline Thanks Meter: 46	plz check ur cable.open your cable and put 10k resister then do unlock. ur problem solved

05-17-2009, 08:56	#6 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	cant say for cable problem least phone isin needed mode thats why iNFO is readed

05-17-2009, 10:30	#8 (permalink)
hasnain No Life Poster Join Date: Apr 2006 Location: Pakistan Posts: 4,239 Member: 265626 Status: Offline Sonork: 100.1591486 Thanks Meter: 2,982	Always TRY to USE TMA ADOPTER if u got such error that error are due to bad cable BAD CABLE means not good fo cyclone box. different resistor value needed.

05-17-2009, 10:50	#9 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 42 Posts: 2,097 Member: 137474 Status: Offline Sonork: 100.109924 Thanks Meter: 471	No this is not bad cable errror!! !! !! I try to use UFC cable and try few resistror and all time the same then error is not from cable !! !! !! !! !! !! !! !! !! !! !! !! !! !! !!

05-17-2009, 12:26	#10 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	i said above its not cable problem but some people wont Listen... @wgmmmx Mate a test read info with USB and see what it shows

05-21-2009, 13:13	#11 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	If there is problem with parsing sp info, or sp is corrupted itself (may happen), just tick "skip sp read" during unlock !!! And your phone will be unlocked anyway, no matter what sp status is . Best regards !!!!!!