asha300 contact service hello i have asha 300 without sim phone just option accept without simcard and off and with sim phone show contact service and off plz tell me |
please, post the logs of infos and security analyze BR Alex |
here is info or anlays security |
Reading info... [Nokia USB Phonet]: Port opened OK! MCU Version V 07.49 MCU Date 31-05-12 Product RM-781 (Nokia RM-781) Manufacturer (c) Nokia IMEI 358630044115048 Mastercode 175267233 IMEI Spare 3A85360044110504 IMEI SV 3385360044110554F7000000 PPM V 07.49, 31-05-12, RM-781, (c) Nokia , MEA CNT Content: meaa_059K2D3, V 07.49, 31-05-12, RM-781, (c) Nokia PSN 0 PSD 0000000000000000 LPSN 0 RETU 51 TAHVO 00 AHNE 21 RFIC |Alli_4.b.1 DSP 92_PM2_7.49 LCD TPO BT 1673-46038 Failed to read info -> Failed to read SP info Read info thread finished, continuing... Post flash tasks finished! Flashing successfully finished! Started Phone Security Analysis... [Nokia USB Phonet]: Port opened OK! MCU Version V 07.49 MCU Date 31-05-12 Product RM-781 (Nokia RM-781) Manufacturer (c) Nokia IMEI 358630044115048 Mastercode 175267233 Reading Security Block... Security block OK and saved to "RM-781_358630044115048_7242012_115246 AM.SecurityBlock.PM" Step 1 : Testing SIMLOCK -- SIMLOCK PROBLEM -- Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED! To repair simlock area, Select Unlock method : "RPL CALCULATION", And then click DIRECT UNLOCK. SL Area will be re-formatted. -- SIMLOCK PROBLEM -- Step 2 : Testing SECURITY -- SECURITY PROBLEM -- Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED! To repair it, simply slick "SX4 Authorization / SD Repair" button. After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically) Additionaly, Checking HWC/CCC Certs... Booting CMT... [Nokia USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108 CMT_EM_ASIC_ID: 00001051 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 664E0000FFFB3C4068473F5B2C0922C5D42D7106 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706 CMT_BOOT_ROM_CRC: 2CAC45E2 CMT_SECURE_ROM_CRC: 3BC33C8B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000241, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 9C9241FD29D3EDB35B15180A7DD9692987B4EE7C APE Subsystem Not Found HWC Looks OK! CCC Looks OK! Restarting MCU... -- SECURITY PROBLEM -- [Nokia USB Phonet]: Port opened OK! Step 3 : Analyzing Security Block "664E0000FFFB3C4068473F5B2C0922C5D42D7106.B000232B " Exists, That is good... Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking ECC KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking DIV KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Analyze finished! |
simlock damaged...if you dont have backup you have to for nokia RPL |
All times are GMT +1. The time now is 19:01. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -