Before PA_SL2 unlocking - VERY IMPORTANT - CORRUPTED IMEIS

[karwos]

Dear users,
keep in mind - unlocking BB5 PA_SL2 and SX4 bypass needs correct TX2 adapter attached (bundled in your retail package).
Otherwise after unlock you will get corrupted imei, because without correct TX2 signal provided simply NPC can't be written back. Of course you can restore it back - SW creating auto backup, just attach your adapter again, click Write Cert and point to "(CMT PUBLIC ID HERE).Sx4Bypass.CMT.CRT" - that's all.

It is very imporant.

If you don't have correct adapter or have 5pin cable - you can UNTICK Sx4 Bypass and NPC will be untouched in such case.
In case of PA_SL is no needed for 7 pin cable and adapter - SX4 is not bypassed for this old phones.
PA_SL is determined automatically when unlocking starts.

[akha]

Thanks for new update sir great job to cyclone box team

here sir chk this

is work thanks to cyclone team

[..::Angel::..]

Originally Posted by Cyclonebox

Dear users,
keep in mind - unlocking BB5 PA_SL2 and SX4 bypass needs correct TX2 adapter attached (bundled in your retail package).
Otherwise after unlock you will get corrupted imei. Of course you can restore it back - SW creating auto backup, just attach your adapter again, click Write Cert and point to "Sx4Bypass.CMT.CRT" - that's all.

It is very imporant.

If you don't have correct adapter or have 5pin cable - you can UNTICK Sx4 Bypass and NPC will be untouched in such case.

@CycloneBox
as far i know that PA_SL2 Unlocking is patch pm in PM Field 120,0 or 308,1
So why Cyclonebox damage the npc

did Cyclone erased the npc to write pm field 308,1 bcoz it write protected .

i think you are using Solution Same/Copied from zulea trick and UB loaders ,

bcoz after unlocked phone simlock key changed to GSM Test Equipment 0010100 .

[karwos]

Originally Posted by ..::Angel::..

@CycloneBox
as far i know that PA_SL2 Unlocking is patch pm in PM Field 120,0 or 308,1
So why Cyclonebox damage the npc

did Cyclone erased the npc to write pm field 308,1 bcoz it write protected .

i think you are using Solution Same/Copied from zulea trick and UB loaders ,

bcoz after unlocked phone simlock key changed to GSM Test Equipment 0010100 .

It is caused SX4 bypass and you know if there is no TX2 pin the NPC will not be restored. But of course backup is made automatically.

[Skaza]

hmm you using karwos solution bypass sx4 but ufs cannot need special adapter to restore npc
no need using sx4 bypass for unlock phone cant have protect pm 6210 6500and more .

[karwos]

Originally Posted by Skaza

hmm you using karwos solution bypass sx4 but ufs cannot need special adapter to restore npc
no need using sx4 bypass for unlock phone cant have protect pm 6210 6500and more .

We don't need it to - but in case it's needed to untick "Use TX2" so old loaders will be used.
The problems going on with RAPIDO and so on
About " sx4 Solution" it not belongs to anyone, moreover i can say it 's public domain and other products using it too.

[Skaza]

karwos published this solution (erase cert using ufs) but not for automat software, must using hex editor
but is not important
keep going best update and best box for NOKIA