Box is Not IN Needed Mod.How To Solve? - Page 5 - GSM-Forum

justincel · 11-04-2009, 14:49

Quote:

Originally Posted by SiRoYa

pm me ur box sn ................

Box Maintenance procedure started at 01:39:51 p.m.
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E
Service Tag: 946724BC9F69AC845025D58A2D339224
Connecting to Cyclone Server
Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready.
========= Box Info =========
Box SN: C0000ABE
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: D0000492
First Name: DAVID
Surname: FLOREZ
Nickname: JUSTINCEL
Address: CC.FEDECAFE
Country: COLOMBIA
E-Mail: [email protected]
Reseller: JustinCell, Colombia
Warranty Start Date: 2009-05-19
Warranty Period (months): 6
Warranty Stop Date: 2009-11-19
Warranty active: Yes
============================
Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Disconnected from Cyclone Server
Box Maintenance finished successfully

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

guedes666 · 11-04-2009, 15:07

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

josetuareg · 11-05-2009, 19:21

is maintained after usb disconnect box
Wait 3 to 5 min.volta to call your clicks
dct4/wd2/bb5 was in so I did several times and it works.

Tuareg:

josetuareg · 11-05-2009, 19:23

* is maintained after usb disconnect box
Wait 3 to 5 min.volta to call your clicks
dct4/wd2/bb5 was in so I did several times and it works.

Tuareg:

moulnisky · 11-06-2009, 04:48

Who has firmware problems can now update it again to the new version 1.0A

BR

Alex

luixin · 11-06-2009, 09:25

Problem solved with the new update. Thank you very much Siroya for your help!!

Good support

Regards

henrynicolas · 11-09-2009, 01:29

I have BOX but today conect and can't detec for software i see in the BOX only turn on TX LED (Yellow) and not detec please help me

ptt · 11-09-2009, 02:04

@ henrynicolas

Read the Cyclonebox post about 06-11-2009 FW release

http://forum.gsmhosting.com/vbb/show...09&postcount=1

Code:

Firmware 01.0A LEDs Meaning upon Main Firmware startup

GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts 
and PLL Clocks (at this stage check 12MHZ Crystals)

GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)

RED, ORANGE Doing Security Checkup (Should not hang here)

ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
NO LEDS Firmware Booted

BR

shubox112 · 11-09-2009, 18:42

I have install the new software and update i cant connect???

Box Maintenance procedure started at 18:39:23
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E
Service Tag: 6878DFD9039DD0F9A2850CF11D985A66
Connecting to Cyclone Server
Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready.
========= Box Info =========
Cyclone Server Send Command Error -> Code: 500, SQL Error: MySQL server has gone away

Box Maintenance Error -> Server command send error

ptt · 11-09-2009, 18:44

@ shubox112

Code:

Cyclone Server Send Command Error -> Code: 500, SQL Error:
 MySQL server has gone away

Server down, try again later....

BR

shubox112 · 11-09-2009, 18:56

I have now this problem it whont connect

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

ptt · 11-09-2009, 19:05

Unplug your box and replug, and go to Box maintenance and try to update your box FW.

BR

shubox112 · 11-09-2009, 19:07

Started card reading procedure at 19:06:30
Handling device: [Cyclone Team], [Cyclone Bootloader]
Card reading error -> No connection was established, or box is not in needed mode

I have already update the firmware

ptt · 11-09-2009, 19:17

have you reinstalled, the Software and the Box Drivers ? Your Box FW is the 1.1A ? When you plug the box, any led remain ON ?

shubox112 · 11-09-2009, 19:19

yeah it is on and then go off. Before update everthing working ok and now not. Ihave few mobiles to unlock

11-05-2009, 19:21	#63 (permalink)
josetuareg Freak Poster Join Date: Aug 2009 Location: PORTUGAL Age: 67 Posts: 114 Member: 1107652 Status: Offline Thanks Meter: 11	is maintained after usb disconnect box Wait 3 to 5 min.volta to call your clicks dct4/wd2/bb5 was in so I did several times and it works. Tuareg: Last edited by josetuareg; 11-05-2009 at 19:26.

11-05-2009, 19:23	#64 (permalink)
josetuareg Freak Poster Join Date: Aug 2009 Location: PORTUGAL Age: 67 Posts: 114 Member: 1107652 Status: Offline Thanks Meter: 11	* is maintained after usb disconnect box Wait 3 to 5 min.volta to call your clicks dct4/wd2/bb5 was in so I did several times and it works. Tuareg: Last edited by josetuareg; 11-05-2009 at 19:30.

11-09-2009, 18:44	#70 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ shubox112 Code: Cyclone Server Send Command Error -> Code: 500, SQL Error: MySQL server has gone away Server down, try again later.... BR

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with my cyclone box.box is not in needed mode	samih127	Cyclonebox	18	06-12-2010 06:05
Box is not in needed mode [SOLVED]	renren	Cyclonebox	2	01-19-2010 22:38
::solve:: box is not in needed mode	mr khalid	Cyclonebox	6	09-15-2009 08:36
Cyclone team (not connected) box is not in needed mode	tims	Cyclonebox	17	06-29-2009 03:54
Box is not in needed mode.	masterunlock	Cyclonebox	5	03-24-2009 16:44

11-04-2009, 15:07	#62 (permalink)
guedes666 No Life Poster Join Date: Jan 2005 Location: PT Age: 40 Posts: 1,753 Member: 108180 Status: Offline Sonork: 100.106866 Thanks Meter: 381	Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Initialization has failed -> No connection was established, or box is not in needed mode

11-06-2009, 04:48	#65 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Who has firmware problems can now update it again to the new version 1.0A BR Alex

11-06-2009, 09:25	#66 (permalink)
luixin Junior Member Join Date: Feb 2008 Posts: 28 Member: 700535 Status: Offline Thanks Meter: 0	Problem solved with the new update. Thank you very much Siroya for your help!! Good support Regards

11-09-2009, 18:42	#69 (permalink)
shubox112 Freak Poster Join Date: Mar 2008 Posts: 108 Member: 730412 Status: Offline Thanks Meter: 4	I have install the new software and update i cant connect??? Box Maintenance procedure started at 18:39:23 Handling device: [Cyclone Team], [Cyclone Bootloader] Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E Service Tag: 6878DFD9039DD0F9A2850CF11D985A66 Connecting to Cyclone Server Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready. ========= Box Info ========= Cyclone Server Send Command Error -> Code: 500, SQL Error: MySQL server has gone away Box Maintenance Error -> Server command send error

11-09-2009, 18:56	#71 (permalink)
shubox112 Freak Poster Join Date: Mar 2008 Posts: 108 Member: 730412 Status: Offline Thanks Meter: 4	I have now this problem it whont connect Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Initialization has failed -> No connection was established, or box is not in needed mode

11-09-2009, 19:05	#72 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	Unplug your box and replug, and go to Box maintenance and try to update your box FW. BR

11-09-2009, 19:07	#73 (permalink)
shubox112 Freak Poster Join Date: Mar 2008 Posts: 108 Member: 730412 Status: Offline Thanks Meter: 4	Started card reading procedure at 19:06:30 Handling device: [Cyclone Team], [Cyclone Bootloader] Card reading error -> No connection was established, or box is not in needed mode I have already update the firmware

11-09-2009, 19:17	#74 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	have you reinstalled, the Software and the Box Drivers ? Your Box FW is the 1.1A ? When you plug the box, any led remain ON ?

11-09-2009, 19:19	#75 (permalink)
shubox112 Freak Poster Join Date: Mar 2008 Posts: 108 Member: 730412 Status: Offline Thanks Meter: 4	yeah it is on and then go off. Before update everthing working ok and now not. Ihave few mobiles to unlock