Cyclone adaptor not work [ Solved, PC problem ] - GSM-Forum

motech · 01-03-2010, 13:42

If I the nokia n95 8gb connect without the adaptor cyclone can find the nokia. As soon as the adaptor are used he doesnot can find the nokia. ?? Only works with 8pin a cable and 10pin the cable works also not with the box.???
Sorry for my bath english

ptt · 01-03-2010, 14:09

Check / redo the solders of the adaptor.

If you want use 10 Pin MT cables you need an adaptor. Read the sticky post "CycloneBox = JAF/UFS = MT-BOX Cable Pinouts Compared "

http://forum.gsmhosting.com/vbb/showthread.php?t=750962

BR

motech · 01-03-2010, 14:49

pin 2 = wite

pin 3 = blue

pin 4= yelo

pin 5= orange

pin 6= green

pin 7= black

pin 8= brown

pin 9= red

pin 10 empty

This is the solders on the print of the adaptor.

There somewhere is a diagram of the cyclone adaptor?

ptt · 01-03-2010, 14:59

Your pinout is OK, check continuity between PCB / RJ-45 socket and Rj-45 conector.

BR

motech · 01-03-2010, 15:09

I several cables such as the combo FBUS have tried cable 10pin & 8pin. 10pin connect on the cyclone without adapter not at all works.
The box is new !!

karwos · 01-03-2010, 15:38

Check adapter solderings,

motech · 01-03-2010, 15:46

The solderings of the adapter is correct.
It must in the box sit because 10 a pin does not work directly on the box also. Only with 8 a pin he something does but gives much error' s

ptt · 01-03-2010, 15:49

Which 10 pin cables are using you ? You can NOT ust MT-Box cables directly with Cyclone, pinouts are diferent, you need an adapter....

BR

motech · 01-03-2010, 16:00

Okeeee Yes it is a cable with a 10 pin's with label TO MT and a 8 pin's with label TO JAF. Is this cable work with the cyclone adaptor? or another adapor.

The cable is MT+JAF065 NK n95-8gb

ptt · 01-03-2010, 16:07

JAF / UFS cables works with Cyclone

For BB5, use Cable + TX2 adapter ( with your combo cable, you must use the TO JAF conector )

For DCT-4 / DCT-4+ conect cable directly to the Service port

BR

motech · 01-03-2010, 16:19

Oke thanks i have connect te TO JAF connector into the tx-2 en the message when i get is PHONE WAS NOT DETECTED AT FBUS INTERFACE............
Read info is also not work. I set the setting to pin1 3 of 10 but is not work

And the message CBUS RESPONSE WRONG HEADER

motech · 01-03-2010, 20:40

Thanks t5he box connected on a new pc with al the drivers and it work !! Thanks for your help.

I have a new problem with unlocken dtv4 plus nokia 7100 supernova

MCU Version V 05.41
MCU Date 26-11-08
Product RM-438
Manufacturer (c) Nokia
IMEI 356791028479339
Mastercode 524414434
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Program Files\Cyclone Box2\UnlockData\
Searching for: RM-438_V 05.41.sunlock_img
Writing patch file...
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Unlock DCT4 -> Failed to write patch file

01-03-2010, 13:42	#1 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	Cyclone adaptor not work [ Solved, PC problem ] If I the nokia n95 8gb connect without the adaptor cyclone can find the nokia. As soon as the adaptor are used he doesnot can find the nokia. ?? Only works with 8pin a cable and 10pin the cable works also not with the box.??? Sorry for my bath english Last edited by ptt; 01-03-2010 at 20:50. Reason: solved

01-03-2010, 15:09	#5 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	I several cables such as the combo FBUS have tried cable 10pin & 8pin. 10pin connect on the cyclone without adapter not at all works. The box is new !! Last edited by motech; 01-03-2010 at 15:18.

01-03-2010, 16:19	#11 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	Oke thanks i have connect te TO JAF connector into the tx-2 en the message when i get is PHONE WAS NOT DETECTED AT FBUS INTERFACE............ Read info is also not work. I set the setting to pin1 3 of 10 but is not work And the message CBUS RESPONSE WRONG HEADER Last edited by motech; 01-03-2010 at 16:28.

01-03-2010, 20:40	#12 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	Thanks t5he box connected on a new pc with al the drivers and it work !! Thanks for your help. I have a new problem with unlocken dtv4 plus nokia 7100 supernova MCU Version V 05.41 MCU Date 26-11-08 Product RM-438 Manufacturer (c) Nokia IMEI 356791028479339 Mastercode 524414434 Selecting unlock method... Using Super DCT4 Activation Search in: C:\Program Files\Cyclone Box2\UnlockData\ Searching for: RM-438_V 05.41.sunlock_img Writing patch file... Booting UPP... Box VPP disabled Processing Flash Image Failed -> UPP Not Responding Failed to Unlock DCT4 -> Failed to write patch file Last edited by ptt; 01-03-2010 at 20:51. Reason: initial problem solved, user open new thread about DCT-4 + unlock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New cyclone hardware not working, registration problem [ Solved ]	ARBSM	Cyclonebox	1	02-09-2010 19:05
Cyclone Website not working	Sydney_Unlocker	Cyclonebox	1	10-21-2009 23:44
Urgent my cyclone box not working	pablete	Cyclonebox	3	05-21-2009 11:12
activation lg i pay and not work!!! // solved , and working !! enjoy	juceca21	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	11	12-27-2008 23:01
Ub bb5 adaptor not working and y cable not avail pakistan	ayaz ali	Universalbox	1	10-12-2008 13:04

01-03-2010, 14:09	#2 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	Check / redo the solders of the adaptor. If you want use 10 Pin MT cables you need an adaptor. Read the sticky post "CycloneBox = JAF/UFS = MT-BOX Cable Pinouts Compared " http://forum.gsmhosting.com/vbb/showthread.php?t=750962 BR

01-03-2010, 14:49	#3 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	pin 2 = wite pin 3 = blue pin 4= yelo pin 5= orange pin 6= green pin 7= black pin 8= brown pin 9= red pin 10 empty This is the solders on the print of the adaptor. There somewhere is a diagram of the cyclone adaptor?

01-03-2010, 14:59	#4 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	Your pinout is OK, check continuity between PCB / RJ-45 socket and Rj-45 conector. BR

01-03-2010, 15:38	#6 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Check adapter solderings,

01-03-2010, 15:46	#7 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	The solderings of the adapter is correct. It must in the box sit because 10 a pin does not work directly on the box also. Only with 8 a pin he something does but gives much error' s

01-03-2010, 15:49	#8 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	Which 10 pin cables are using you ? You can NOT ust MT-Box cables directly with Cyclone, pinouts are diferent, you need an adapter.... BR

01-03-2010, 16:00	#9 (permalink)
motech Junior Member Join Date: Nov 2009 Posts: 12 Member: 1166619 Status: Offline Thanks Meter: 0	Okeeee Yes it is a cable with a 10 pin's with label TO MT and a 8 pin's with label TO JAF. Is this cable work with the cyclone adaptor? or another adapor. The cable is MT+JAF065 NK n95-8gb

01-03-2010, 16:07	#10 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	JAF / UFS cables works with Cyclone For BB5, use Cable + TX2 adapter ( with your combo cable, you must use the TO JAF conector ) For DCT-4 / DCT-4+ conect cable directly to the Service port BR