*** Cyclone Box - Download - Installation - First Steps ***
 

(Updated 07.07.2010 - )


1. Download final installer from: http://www.**********/CycloneBoxInstaller.exe and Install it. While installing agree to install box drivers, etc.

2. Connect box to PC. PC should detect new device - "Cyclone Bootloader". Simply do automatic driver installation, till installer installed them in Win32 INF already.

3. Run Start -> Programs -> Cyclone Box -> Cyclone Box

http://img254.imageshack.us/img254/2122/ins1.th.png

At bottom, you should see "Connected [Bootloader Mode]". That means your box was detected by software, and you can proceed with box registration - needed step to activate your box.

4. Run Box Registration Wizard, click Prepare Box.

http://img21.imageshack.us/img21/4755/ins2.th.png

Select your reseller from list, and fill all needed data.

http://img22.imageshack.us/img22/5579/ins3.th.png

If you see "Box registration status: Registered OK" that means all passed ok. You can proceed with box activation.

5. Run Box Maintenance Wizard, and click Maintenance box. In 1-2 minutes your box will be initialized.

**** VERY IMPORTANT : During box upgrade, please DON'T disconnect your box, even if software may act as hang ! We use ciphering on few layers during upgrade, and if you have slower PC, decrypting RSA and other ciphers, may take quite more time !! And then, if you disconnect your box, it will not be upgraded. It is no problem, because it will not be damaged, but You will lose YOUR time and OURS time, asking for next update credit !!

http://img15.imageshack.us/img15/2861/ins4.th.png

6. Your box is registered and activated. Now your security card needs be initialized. To initialize security card, box needs be activated! Run Security Card Manager. Read your card, and click Fill Credits. Box should change its mode to Cyclone Box and Windows should install new drivers again (same steps as for Bootloader). On bottom of screen you should see "Connected [Main Mode]".

http://img23.imageshack.us/img23/7396/ins5.th.png

8. All is done. You can run DCT4/WD2/BB5 tool and check if necessary selftests will be passsed, so you can enjoy using your Cyclone Box ;) One note: security card having 1000 credits at initialization. Each card operation tooks those credits, so after some time you need to reinitialize card (when counter reachs 0). This operation is of course free and realtime, using server.

http://img21.imageshack.us/img21/2741/ins6.th.png

Remember to check the Version of the software and the firmware of your Cyclone box

Enjoy your box!

Note : Mirror for installer and exe : Index of /downloads

well said honey...they expect the product developer to predict their own future..

........................
sorry double post.

I think support have missed my question (or maybe there is nothing to say - no advantages...?)

I will just repeat myself once again.

Please give us some good reasons why we should buy it? Most of us have plenty tools for nokia phones nowadays... I have 5 different tools that does all my needs for now... so whats so special with CycloneBox ?

(P.S. - Im one of the customers who is interested in your new product, so make a good comparison between your tool and others, advantages and disadvantages please...)

BR

(PLEASE REPLY WITH AN ANSWER - NOT WITH AN EXCUSE AS U ARE TOO BUSY)

Nothing is missing. THe ppls which using this device should post their feedback about advantages or disadvantages, that is all.

manual instalation cliclone box by OROBAS
 

LINK Manual in Spanish full

http://www.4shared.com/file/94775835...spaol__2_.html

Thanks for contribution

Hello cyclone box team...

I like your ads... But i'm not satisfied yet.

Can you give 5 reasons why we buy your box?

info good work team...........


Description :

Cyclone Box is a brand new tool for flashing and servicing of the latest Nokia BB5, DCT-L, DCT4, DCT4+ cell phones.
Features

* USB BUS powered only, current in idle is 55mA
* World's first flexible configurations via software. It can be used TX2 pin on any RJ48 output i/o pin.
* First in the world built-in 10 pin diagnostic service for measuring phone damages via: voltage, current, frequency, STI BUS
* High speed flasher, real BUS speed up to 10-11Mbit, using 2 data lines
* UFS/JAF compatible pinout
* Switchable VPP - externally or internally generated signal, high speed flashing/erasing
* Advanced self-testing system
* Supports both FLASHBUS and USB connections for Nokia phones
* Built-in secure smart-card
* Cyclone Box uses it's own Smart Card and FTDI drivers so there are no conflicts with other devices
* Free 100 ASK-RPL credits are included into Cyclone Box pack to perform RPL calculation for Nokia DCT4 and DCT4Plus. The user does not need to wait for ASK-RPL online calculation.

Supported models and features
DCT4
Features

* Flash software (upgrade/downgrade)
* Reset SP SIM locks
* Lock phone to any network
* IMEI repair for the latest models
* Flash Bluetooth
* Save user settings
* Full factory (UI) defaults
* Software upgrade defaults
* Reset user lock (security code)

Supported DCT4 models

1100, 1100, 1101, 1108, 1110, 1110, 1110i, 1112, 1112, 1112i, 1600, 1600, 2112, 2125i, 2126i, 2128i, 2255, 2300, 2300, 2355, 2600, 2600, 2650, 2651, 2652, 2760 Americas, 2760 Europe/Asia, 3100, 3105, 3108, 3120, 3120, 3125, 3128, 3129, 3152, 3155, 3155i, 3200, 3205, 3205i, 3220, 3220, 3230, 3300, 3300, 3320, 3321, 3360, 3361, 3510, 3510i, 3520, 3530, 3560, 3570, 3585, 3586, 3586i, 3587, 3587i, 3588i, 3589i, 3590, 3595, 3595i, 3600, 3620, 3650, 3660, 5070, 5070, 5100, 5140, 5140, 5140i, 6010, 6012, 6015, 6015i, 6016i, 6019i, 6020, 6020, 6021, 6030, 6030, 6050, 6060, 6060, 6061, 6070, 6070, 6080, 6080, 610, 6100, 6101, 6101, 6101, 6102, 6102, 6102, 6102, 6103, 6103, 6108, 6111, 6112, 6152, 6155, 6155i, 616, 6170, 6170, 6200, 6220, 6225, 6225i, 6230, 6230, 6230i, 6235, 6235i, 6236i, 6255, 6255i, 6256, 6256i, 6260, 6260, 6310, 6310i, 6340, 6340i, 6360, 6370, 6385, 6500, 6510, 6560, 6585, 6590, 6590i, 6600, 6610, 6610i, 6620, 6650, 6651, 6670, 6670, 6800, 6800, 6810, 6820, 6820, 6820i, 6822, 6822, 7200, 7210, 7250, 7250, 7260, 7270, 7270, 7280, 7280, 7360, 7380, 7600, 7610, 7610, 7620, 7650, 7700, 7710, 810, 8310, 8390, 8587, 8800, 8800 Sirocco Edition, 8801, 8910, 8910i, N-Gage, N-Gage QD
Supported DCT4+ models

1200, 1208, 1208b, 1650, 1650b, 1680c-2b Classic, 2310, 2610, 2610b, 2626, 2630 Americas, 2630 Europe/Asia, 2670h
All ASIC11 models supported
Nokia DCT-L
Features

* Flash software (upgrade/downgrade)
* Unlock
* Set FAID
* IMEI repair
* Set UI defaults

Supported DCT-L models

9290, 9210, 9210i (communicator)
Nokia BB5
Features:

* Flash software (upgrade/downgrade)
* USB high speed flash supported
* Easy RPL service for damaged phones
* SIM lock and IMEI rebuild to the factory state
* Save user settings
* Set product code after flashing
* Full factory (UI) defaults
* Software upgrade defaults
* Reset/read user lock (security code)

Supported Nokia BB5 models:

3109 Classic, 3110 Classic, 3120 Classic, 3250, 3500 Classic, 3600 Slide, 3610 Fold, 5200 XpressMusic, 5200, 5220 XpressMusic, 5300 XpressMusic, 5310 XpressMusic, 5320 XpressMusic, 5500, 5500 Sport, 5610 XpressMusic, 5700 XpressMusic, 5710 XpressMusic, 6085, 6086, 6110 Navigator, 6120 Classic, 6121 Classic, 6124 Vodafone, 6125, 6126, 6131, 6131 NFC, 6133, 6135, 6136, 6151, 6210 Navigator, 6212 Classic, 6220 Classic, 6233, 6234, 6267, 6270, 6280, 6282, 6288, 6290, 6300, 6300i, 6301, 6500 Classic, 6500 Slide, 6555, 6555 Classic, 6556 Classic, 6600 Fold, 6600 Slide, 6630, 6631 (NM850iG), 6650 T-Mobile, 6680, 6681, 6682, 7310 Supernova, 7370, 7373, 7390, 7500 Prism, 7510 Supernova, 7610 Supernova, 7900 Prism, 8600 Luna, 8800 Arte, E50, E51, E60, E61, E61i, E62, E65, E66, E70, E71, E90 Communicator, N70, N71, N72, N73, N75, N76, N77, N78, N79, N80, N81 8GB,N82, N85, N90, N91, N92, N93, N93i, N95, N95 8GB, N95 NAM, N95 8GB NAM, N96
Package contains
# Cyclone Box - 1 pc.
# Cable adaptor - 1 pc.
# 100 ASK-RPL credits
Weight: 0.2kg

Available in Hong Kong stock
Buy now
Price 139 USD | Suggest your price

Please tell me your date/time zone

27 - March - 2009
Colombia
Hour 14:41

GMT-05:00

Help please Mr Cyclone Team.

Send me your SERVICE TAG @ PM

Use private messaging.
And send me "SERVICE TAG". You can see it during box upgrade.

sir
no one can not reply me please help me vpp error

@maruti

Check your PM.



BR.

[QUOTE]Started card reading procedure at 9:24:06 PM
Handling device: [Cyclone Team], [Cyclone Bootloader]
Card reading error -> No connection was established, or box is not in needed mode
[/QUOTE]

this prob sir??????????

@ imamcho

unplug and plug again your box if not work then uninstall driver and install again it should work perfect.

;)

i send my sn nu. & reseller name

Yes just send SN to ME, Honey or Siroya and it wil be done in minutes

@maruti
This problem comes probably from faulty VPP Internal Power IC, send me your PCB pic so I can tell more.

About "no one reply me", pls understand, sometimes i need leave this forum because updates takes both time and energy ;) also is easter here and in fact all offices are closed :cool: But this is minor problem :p

thanks sir but , i send box to reseller so not send pcb imeg presently

I asked, want to change the registration information again how?

TO CYCLONEBOX:
HI, I have problems with a 7210 supernova, why cyclonebox can unlock 7310 supernova but NOT 7210s? can this box repair CS of this model (RM-436)? and can repair IMEI:1234.....Of same model (7210S)? THX in advance.

TO CYCLONEBOX:
HI, I have problems with a 7210 supernova, why cyclonebox can unlock 7310 supernova but NOT 7210s? can this box repair CS of this model (RM-436)? and can repair IMEI:1234.....Of same model (7210S)? THX in advance.

cyclone box no unlock bb5

@cyclone box:

can syclone-box rebuild imei for DCT4/+,and flash/unlock 1110i 06.46 indian product and BB5/+. big thnks

Yes cyclone can Rebuild DCT4 IMEI there all ready included 100 free credit with box & Flash ,unlock also do DCT4 & BB5 Flash also.







JHON_DREAM.

have u tried unlocking 7310super nova with it ?
Reparing CS depends on cause how that happens and whats SImlock COndition in Phone
Imei repair only possible with RPL offcourse

Please add use ini options

not update,,,,,,,,,,

Box SN: C000020D
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: D1000409
First Name: farncis
Surname: kiko
Nickname: kiko
Address: lingayen
Country: Philippines
E-Mail: [email protected]
Reseller: Gsmserver, Hongkong
Warranty Start Date: 2009-04-22
Warranty Period (months): 6
Warranty Stop Date: 2009-10-22
Warranty active: Yes
============================
Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Disconnected from Cyclone Server
Box Maintenance finished successfully

here my porblem help

http://forum.gsmhosting.com/vbb/showthread.php?t=723405

Already replied, its not a good idea to post everywhere.



BR.

the Cyclone Box can unlock bb5 sim lock without TP??? need credit or not?? :confused:Thanks..

Not at the moment.



BR.

sir what the is the purpose of TX2

i can see under to it theres three option

SERVICE PIN 1 3 and 10

whene we are going to use it?

TNX very much



i install mine properly w/c any problem just today

Pls Help!
 

Hi Sir!

I was succesfully install cyclone box & drivers, but when i want to activate or click on the maintenance, i receive this message:

Box Open Error -> Security problem #1
Box Maintenance Error -> No connection was established, or box is not in needed mode
(the box is connected in Bootloader mode!!!!)

Any Ideas?

Hi,

You must use TX2 adaptor with BB5 phones. It is not required with DCT4 phones.



BR.

This error comes when there is some missing dll file from the installation, try reinstall setup.



BR.

Why rpl asic 11 is loss 2credits?
 

Why reduct 2 credits for rebuild rpls asic 11?

How we can resolve this problem:

http://support.gsmsaigon.com/files/!image/watchdog.JPG

Upgrade your box again.
Somehow your security area was not upgraded and there is mismatch between SA and Main fw.
I toggled flags now so after upgrading again it will work ok

after updating still same problem :(

Send me ISS file (in same dir with box)

cyclone box regested problem plz help.


jounir member

Hi,

Be clear with your question, post log, complete details or screen shot.



BR.

hi cyclone i want to know about imei patching and changing in dct4 and plus cyclone box is it posible

support..... see other boxs not so great no-more...