cyclone not unlock or C/S 5220 old one.. but i m not surprise. it happen many times - GSM-Forum

akshay · 04-15-2011, 15:57

cyclone not able to unlock many of old bb5 models.. many many times.
like 5220,7210, 3110, etc... the issue with some phones.. not with every phone..dnt no why , but i m tired with this issue from a long time. or mx can done in seconds.

the log of cyclone.

Prepare Phone
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16A0020E675A5750D91115D5BC8584DF10843A14
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
BB5 Unlock Started...
MCU Version V 07.23
MCU Date 17-07-09
Product RM-411 (Nokia 5220 XpressMusic)
Manufacturer (c) Nokia
IMEI 353662017941261
Mastercode 663667364
Warning: Failed to read SP Info, Assuming defaults
Simlock Server SIMLOCK SERVER
Simlock Key 73734D7573696329
Simlock Profile 3232302058707265
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Reading Security Block...
Security block OK and saved to "RM-411_353662017941261_4152011_80835 PM.SecurityBlock.PM"
"16A0020E675A5750D91115D5BC8584DF10843A14.C00041C5 " Exists, That is good...
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+462661369678135+1#
#pw+923532114082841+2#
#pw+267969670429337+3#
#pw+993838871611063+4#
#pw+364343073549109+5#
#pw+851132635867470+6#
#pw+729949895815709+7#
Sending NCK Codes..
NCK[1] - Unknown Error (0x02)
NCK[2] - Too fast between tries (bruteforce protection)
NCK[3] - Too fast between tries (bruteforce protection)
NCK[4] - Too fast between tries (bruteforce protection)
NCK[5] - Too fast between tries (bruteforce protection)
NCK[6] - Too fast between tries (bruteforce protection)
NCK[7] - Too fast between tries (bruteforce protection)
BB5 Unlock Failed -> No any NCK Code has been accepted

BB5 Unlock Started...
MCU Version V 07.23
MCU Date 17-07-09
Product RM-411 (Nokia 5220 XpressMusic)
Manufacturer (c) Nokia
IMEI 353662017941261
Mastercode 663667364
Warning: Failed to read SP Info, Assuming defaults
Simlock Server SIMLOCK SERVER
Simlock Key 73734D7573696329
Simlock Profile 3232302058707265
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Reading Security Block...
Security block OK and saved to "RM-411_353662017941261_4152011_80846 PM.SecurityBlock.PM"
Determining PA Simlock...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16A0020E675A5750D91115D5BC8584DF10843A14
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: PM Security Block Calculation
BB5 Unlock Failed -> Unsupported Rootkey Hash for selected Unlock Method, this is critical

b2k · 04-15-2011, 18:57

I don't see try from the most prefered method, unlock by creating RPL file. Give it a try.

dapx · 04-15-2011, 20:26

Utilize RPL Calculation Method... NCK many times not acepted.

B.R.

dragosgsm · 04-15-2011, 20:50

Why don't you try other unlock methods(like RPL calc) or enter the unlock codes manualy ?????????

moulnisky · 04-16-2011, 07:36

Are you using a recent version of the software and the firmware? looks like you are about 1 year back as updates

BR

Alex

akshay · 04-25-2011, 07:04

hppe u understand with this details

Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.57, (Mar 10 2011 12:45:53, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: *******
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Initializing security card...
Card Serial Number: *******
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.07v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.75v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.98v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

moulnisky · 04-25-2011, 07:44

this error
NCK[1] - Unknown Error (0x02)
means the simlock area is corrupted: just unlock it using the rpl method and it will be fine.

BR

Alex

akshay · 04-26-2011, 10:11

my brother already try unlock rpl method tooooo. but the same thing. but mx-key done .
i see therer is no prob... with every phones,but with few one..

04-15-2011, 15:57	#1 (permalink)
akshay No Life Poster Join Date: Nov 2002 Location: Everywere Age: 46 Posts: 679 Member: 18057 Status: Offline Thanks Meter: 64	cyclone not unlock or C/S 5220 old one.. but i m not surprise. it happen many times cyclone not able to unlock many of old bb5 models.. many many times. like 5220,7210, 3110, etc... the issue with some phones.. not with every phone..dnt no why , but i m tired with this issue from a long time. or mx can done in seconds. the log of cyclone. Prepare Phone Booting CMT... CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16A0020E675A5750D91115D5BC8584DF10843A14 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT_BOOT_ROM_CRC: 273F6D55 CMT_SECURE_ROM_CRC: DFAAF68F CMT Ready! Searching for BootCode: DualLine 32Bit RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using OLD BB5 FLASHING PROTOCOL FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit Searching for BootCode: DualLine 32Bit FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... BB5 Unlock Started... MCU Version V 07.23 MCU Date 17-07-09 Product RM-411 (Nokia 5220 XpressMusic) Manufacturer (c) Nokia IMEI 353662017941261 Mastercode 663667364 Warning: Failed to read SP Info, Assuming defaults Simlock Server SIMLOCK SERVER Simlock Key 73734D7573696329 Simlock Profile 3232302058707265 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Reading Security Block... Security block OK and saved to "RM-411_353662017941261_4152011_80835 PM.SecurityBlock.PM" "16A0020E675A5750D91115D5BC8584DF10843A14.C00041C5 " Exists, That is good... Checking for Rootkey Hash support with selected Unlock Method... Selected Unlock Method: NCK Calculation (new method) #pw+462661369678135+1# #pw+923532114082841+2# #pw+267969670429337+3# #pw+993838871611063+4# #pw+364343073549109+5# #pw+851132635867470+6# #pw+729949895815709+7# Sending NCK Codes.. NCK[1] - Unknown Error (0x02) NCK[2] - Too fast between tries (bruteforce protection) NCK[3] - Too fast between tries (bruteforce protection) NCK[4] - Too fast between tries (bruteforce protection) NCK[5] - Too fast between tries (bruteforce protection) NCK[6] - Too fast between tries (bruteforce protection) NCK[7] - Too fast between tries (bruteforce protection) BB5 Unlock Failed -> No any NCK Code has been accepted BB5 Unlock Started... MCU Version V 07.23 MCU Date 17-07-09 Product RM-411 (Nokia 5220 XpressMusic) Manufacturer (c) Nokia IMEI 353662017941261 Mastercode 663667364 Warning: Failed to read SP Info, Assuming defaults Simlock Server SIMLOCK SERVER Simlock Key 73734D7573696329 Simlock Profile 3232302058707265 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Reading Security Block... Security block OK and saved to "RM-411_353662017941261_4152011_80846 PM.SecurityBlock.PM" Determining PA Simlock... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16A0020E675A5750D91115D5BC8584DF10843A14 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT_BOOT_ROM_CRC: 273F6D55 CMT_SECURE_ROM_CRC: DFAAF68F CMT Ready! Searching for BootCode: DualLine 32Bit RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using OLD BB5 FLASHING PROTOCOL FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit Searching for BootCode: DualLine 32Bit FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... Determined PA Simlock: PA_SL2 Checking for Rootkey Hash support with selected Unlock Method... Selected Unlock Method: PM Security Block Calculation BB5 Unlock Failed -> Unsupported Rootkey Hash for selected Unlock Method, this is critical

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

04-15-2011, 18:57	#2 (permalink)
b2k Freak Poster Join Date: Mar 2004 Location: VoiD Posts: 276 Member: 59737 Status: Offline Sonork: 100.1603188 Thanks Meter: 18	I don't see try from the most prefered method, unlock by creating RPL file. Give it a try.

04-15-2011, 20:26	#3 (permalink)
dapx No Life Poster Join Date: Jun 2009 Location: Paraguay Posts: 778 Member: 1064967 Status: Offline Thanks Meter: 131	Utilize RPL Calculation Method... NCK many times not acepted. B.R.

04-15-2011, 20:50	#4 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	Why don't you try other unlock methods(like RPL calc) or enter the unlock codes manualy ?????????

04-16-2011, 07:36	#5 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Are you using a recent version of the software and the firmware? looks like you are about 1 year back as updates BR Alex

04-25-2011, 07:04	#6 (permalink)
akshay No Life Poster Join Date: Nov 2002 Location: Everywere Age: 46 Posts: 679 Member: 18057 Status: Offline Thanks Meter: 64	hppe u understand with this details Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v01.57, (Mar 10 2011 12:45:53, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number: ***** HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40 Initializing security card... Card Serial Number: ***** Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5.07v PASSED MCU Voltage 3.30v PASSED Core Voltage 1.75v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 4.98v PASSED Box VPP disabled VPP Voltage 0.02v PASSED Internal Box VPP Enabled VPP Voltage 4.95v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE Initializing FBUS... All initialized - Ready to work

04-25-2011, 07:44	#7 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	this error NCK[1] - Unknown Error (0x02) means the simlock area is corrupted: just unlock it using the rpl method and it will be fine. BR Alex

04-26-2011, 10:11	#8 (permalink)
akshay No Life Poster Join Date: Nov 2002 Location: Everywere Age: 46 Posts: 679 Member: 18057 Status: Offline Thanks Meter: 64	my brother already try unlock rpl method tooooo. but the same thing. but mx-key done . i see therer is no prob... with every phones,but with few one..