Cyclone Team Please Help - GSM-Forum

KhalIman · 06-04-2009, 16:50

I try to Flash Nokia N70 But when i Click on Red Info
the Process doesn't End Properly, I Always GEt

BB5 Unlock Started...
BB5 Unlock Failed -> Phone not detected (FBUS)
MCU Version V 05wk07v48.1
MCU Date 28-08-07
Product RM-84
Manufacturer (c) Nokia.
IMEI 354551010915472
Mastercode 75472324
IMEI Spare 3A45550101194507
IMEI SV 3345550101194517F2000000
PPM V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
PSN SFF926647
Product Code 0530763
Basic Product Code 0522156
PSD 0000001700000000
APE SW V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokia
APE Variant V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.
APE HW 256
APE ADSP 16054
RETU 32
TAHVO 52
AHNE 22
HW 7001i,'V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
PCI i,'V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
UEM V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
UPP V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
RFIC 150a160f
DSP rolf_05wk07v29p1
LCD V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
BT V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054
Failed to read info -> Failed to read extended info

I try To unlock it and got

BB5 Unlock Started...
MCU Version V 05wk07v48.1
MCU Date 28-08-07
Product RM-84
Manufacturer (c) Nokia.
IMEI 354551010915472
Mastercode 75472324
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC225000000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
BB5 Unlock Failed -> Failed to Boot / Prepare Phone

Please help

and that is BOX Self Test

Started box selftests procedure
USB Voltage 5.01v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.82v PASSED
VBAT Voltage 1.38v PASSED
VBAT Voltage 4.79v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work

last thing I Use the yellow adapter and I use a good 7pin cable

***moulnisky*** · 06-04-2009, 16:55

Do the PM back-up then try the unlock using "skip sp info".

BR

Alex

KhalIman · 06-04-2009, 17:03

thank you sir but it doesn't work
same error

BB5 Unlock Started...
MCU Version V 05wk07v48.1
MCU Date 28-08-07
Product RM-84
Manufacturer (c) Nokia.
IMEI 354551010915472
Mastercode 75472324
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC225000000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
BB5 Unlock Failed -> Failed to Boot / Prepare Phone

***moulnisky*** · 06-04-2009, 17:06

Can you please post a self test of the mobile? (is in the windows common/info)

BR

Alex

KhalIman · 06-04-2009, 17:28

here it is

Selftests to proceed: 34
Passed ST_TAHVOINT_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SLEEPCLK_FREQ_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_CMT_APE_WAKEUP_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_RADIO_TEST
Passed ST_HOOKINT_TEST
Passed ST_VIBRA_TEST
Passed ST_BTEMP_TEST
Failed ST_CDSP_RF_BB_IF_TEST
Failed ST_CDSP_RF_SUPPLY_TEST
Failed ST_CDSP_TX_IQ_TEST
Failed ST_CDSP_TXC_DATA_TEST
Failed ST_CDSP_WCDMA_TX_POWER_TEST
Failed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Failed ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Failed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Failed ST_CDSP_PWR_DETECTOR_BIAS_TEST
Failed ST_CDSP_GSM_TX_POWER_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LPRF_IF_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_SEC_CAMERA_IF_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_MAIN_LCD_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_BT_SLEEP_CLK_TEST
Selftests done, Tests total: 34, Tests passed: 24, Tests not passed: 10
thank you

***moulnisky*** · 06-04-2009, 19:47

Mobile is OK.. the errors you get have nothing to do with Pm area..
I think you can try removing the "thick" (in BB5/flashing) where says use tx2 line and retry again passing from check flashing bus..

BR

Alex

NADEEM GONDAL · 06-05-2009, 05:09

Skip Read SP INFO
and Uncheck TX2 line
repeat procedure must work

KhalIman · 06-05-2009, 13:31

Quote:

Originally Posted by NADEEM GONDAL

Skip Read SP INFO
and Uncheck TX2 line
repeat procedure must work

thanks 4 your answer, but I did this many and not help
please see This Videos
thank you

***moulnisky*** · 06-05-2009, 14:12

Looks like your mobile doesn't get a stable local mode.. may be a bsi or a power problem..
Do you have any helper like TMA adaptor or similar?

BR

Alex

FEATURE GSM™ · 06-05-2009, 14:41

Quote:

Originally Posted by KhalIman

thanks 4 your answer, but I did this many and not help
please see This Videos
thank you

hi sir can you uplod other links pls sir

***moulnisky*** · 06-05-2009, 14:46

here another link
http://rapidshare.com/files/24111492...thCyclone_.rar

BR

Alex

KhalIman · 06-05-2009, 16:47

Quote:

Originally Posted by moulnisky

Looks like your mobile doesn't get a stable local mode.. may be a bsi or a power problem..
Do you have any helper like TMA adaptor or similar?

BR

Alex

no sir i don't have any adapter but i think the cable is good enough
cause i unlocked one 6085 with it, Check here
and i can do any thing with the same cable With J@F Box
I think i have a good cable

***moulnisky*** · 06-05-2009, 18:33

The ufc cable helps you for the BSI problem but not for the power problem..
have a look here (just made a few pictures with my web to sho you the difference with a power problem solution on a N95 win the UFC and a normal FBUS cable with and without)
http://rapidshare.com/files/24118627...l_solution.zip

Here the thread about the local mode solution.. just have a look afterward
Local mode final solution for BB5 cables

BR

Alex

KhalIman · 06-05-2009, 20:03

Thank you sir, Ill Try Understand This Schematic and will Modify My Cable,
1 more question, I i have TMA Adapter, Do i need to modify My Cable?

***moulnisky*** · 06-05-2009, 20:46

If you have the TMA adaptor with the USB cable I think it should be OK..
IF it hasn't the usb you can refer to this thread about how to modify it.

Need tma modify v 1.0

There is as well in the TMA website the video about how to modify the TMA to add the external USB power source.

BR

Alex

06-04-2009, 16:50	#1 (permalink)
KhalIman Freak Poster Join Date: Jun 2006 Posts: 428 Member: 303419 Status: Offline Thanks: 246 Thanked 79 Times in 56 Posts	Cyclone Team Please Help I try to Flash Nokia N70 But when i Click on Red Info the Process doesn't End Properly, I Always GEt BB5 Unlock Started... BB5 Unlock Failed -> Phone not detected (FBUS) MCU Version V 05wk07v48.1 MCU Date 28-08-07 Product RM-84 Manufacturer (c) Nokia. IMEI 354551010915472 Mastercode 75472324 IMEI Spare 3A45550101194507 IMEI SV 3345550101194517F2000000 PPM V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 PSN SFF926647 Product Code 0530763 Basic Product Code 0522156 PSD 0000001700000000 APE SW V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokia APE Variant V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia. APE HW 256 APE ADSP 16054 RETU 32 TAHVO 52 AHNE 22 HW 7001i,'V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 PCI i,'V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 UEM V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 UPP V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 RFIC 150a160f DSP rolf_05wk07v29p1 LCD V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 BT V 5.0737.3.0.1, 13-09-07, RM-84, (C)Nokiaj4.V 5.0737.3.0.1-28.01, 13-09-07, RM-84, (c)Nokia.n256o16054 Failed to read info -> Failed to read extended info I try To unlock it and got BB5 Unlock Started... MCU Version V 05wk07v48.1 MCU Date 28-08-07 Product RM-84 Manufacturer (c) Nokia. IMEI 354551010915472 Mastercode 75472324 Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 17100701 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000 APE_ROM_ID: AB5E4ADB27A06946 CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000352 CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14 CMT_ROM_ID: F28A211FCEA7B19D RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x00EC225000000121, Samsung, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 17100701 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000 APE_ROM_ID: AB5E4ADB27A06946 CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000352 CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14 CMT_ROM_ID: F28A211FCEA7B19D RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... BB5 Unlock Failed -> Failed to Boot / Prepare Phone Please help and that is BOX Self Test Started box selftests procedure USB Voltage 5.01v PASSED MCU Voltage 3.29v PASSED Core Voltage 1.82v PASSED VBAT Voltage 1.38v PASSED VBAT Voltage 4.79v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 4.83v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Initializing FBUS... All initialized - Ready to work last thing I Use the yellow adapter and I use a good 7pin cable

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Support is not allow, cyclone team please help	hajji1	Cyclonebox	4	10-01-2009 15:12
cyclone team please help!	vanus2	Cyclonebox	2	08-11-2009 05:35
cyclone team please help me	cellcarekphb	Cyclonebox	2	07-18-2009 13:29
Cyclone team please help me	cellcarekphb	Cyclonebox	25	05-29-2009 14:21
cyclone team please help me	akha	Cyclonebox	8	05-04-2009 21:55

06-04-2009, 16:55	#2 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	Do the PM back-up then try the unlock using "skip sp info". BR Alex

06-04-2009, 17:03	#3 (permalink)
KhalIman Freak Poster Join Date: Jun 2006 Posts: 428 Member: 303419 Status: Offline Thanks: 246 Thanked 79 Times in 56 Posts	thank you sir but it doesn't work same error BB5 Unlock Started... MCU Version V 05wk07v48.1 MCU Date 28-08-07 Product RM-84 Manufacturer (c) Nokia. IMEI 354551010915472 Mastercode 75472324 Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 17100701 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000 APE_ROM_ID: AB5E4ADB27A06946 CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000352 CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14 CMT_ROM_ID: F28A211FCEA7B19D RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x00EC225000000121, Samsung, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 17100701 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: FBAA8C51FA18A494D87A20D19FEC9264FF039D8A APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000 APE_ROM_ID: AB5E4ADB27A06946 CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000352 CMT_PUBLIC_ID: 1330020B163E545159BECCD48884558D732AF251 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14 CMT_ROM_ID: F28A211FCEA7B19D RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... BB5 Unlock Failed -> Failed to Boot / Prepare Phone

06-04-2009, 17:06	#4 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	Can you please post a self test of the mobile? (is in the windows common/info) BR Alex

06-04-2009, 17:28	#5 (permalink)
KhalIman Freak Poster Join Date: Jun 2006 Posts: 428 Member: 303419 Status: Offline Thanks: 246 Thanked 79 Times in 56 Posts	here it is Selftests to proceed: 34 Passed ST_TAHVOINT_TEST Passed ST_UEM_CBUS_IF_TEST Passed ST_EAR_DATA_LOOP_TEST Passed ST_SIM_CLK_LOOP_TEST Passed ST_SIM_IO_CTRL_LOOP_TEST Passed ST_SLEEPCLK_FREQ_TEST Passed ST_SIM_LOCK_TEST Passed ST_SECURITY_TEST Passed ST_PWR_KEY_TEST Passed ST_CURRENT_CONS_TEST Passed ST_CMT_APE_WAKEUP_TEST Passed ST_BACKUP_BATT_TEST Passed ST_RADIO_TEST Passed ST_HOOKINT_TEST Passed ST_VIBRA_TEST Passed ST_BTEMP_TEST Failed ST_CDSP_RF_BB_IF_TEST Failed ST_CDSP_RF_SUPPLY_TEST Failed ST_CDSP_TX_IQ_TEST Failed ST_CDSP_TXC_DATA_TEST Failed ST_CDSP_WCDMA_TX_POWER_TEST Failed ST_CDSP_RX_IQ_LOOP_BACK_TEST Failed ST_CDSP_RX_PLL_PHASE_LOCK_TEST Failed ST_CDSP_TX_PLL_PHASE_LOCK_TEST Failed ST_CDSP_PWR_DETECTOR_BIAS_TEST Failed ST_CDSP_GSM_TX_POWER_TEST Passed ST_KEYBOARD_STUCK_TEST Passed ST_LPRF_IF_TEST Passed ST_CAMERA_IF_TEST Passed ST_SEC_CAMERA_IF_TEST Passed ST_LPRF_AUDIO_LINES_TEST Passed ST_MAIN_LCD_IF_TEST Passed ST_BT_WAKEUP_TEST Passed ST_BT_SLEEP_CLK_TEST Selftests done, Tests total: 34, Tests passed: 24, Tests not passed: 10 thank you

06-04-2009, 19:47	#6 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	Mobile is OK.. the errors you get have nothing to do with Pm area.. I think you can try removing the "thick" (in BB5/flashing) where says use tx2 line and retry again passing from check flashing bus.. BR Alex

06-05-2009, 05:09	#7 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,624 Member: 575900 Status: Offline Thanks: 701 Thanked 3,117 Times in 733 Posts	Skip Read SP INFO and Uncheck TX2 line repeat procedure must work

06-05-2009, 14:12	#9 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	Looks like your mobile doesn't get a stable local mode.. may be a bsi or a power problem.. Do you have any helper like TMA adaptor or similar? BR Alex

06-05-2009, 14:46	#11 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	here another link http://rapidshare.com/files/24111492...thCyclone_.rar BR Alex

06-05-2009, 18:33	#13 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	The ufc cable helps you for the BSI problem but not for the power problem.. have a look here (just made a few pictures with my web to sho you the difference with a power problem solution on a N95 win the UFC and a normal FBUS cable with and without) http://rapidshare.com/files/24118627...l_solution.zip Here the thread about the local mode solution.. just have a look afterward Local mode final solution for BB5 cables BR Alex

06-05-2009, 20:03	#14 (permalink)
KhalIman Freak Poster Join Date: Jun 2006 Posts: 428 Member: 303419 Status: Offline Thanks: 246 Thanked 79 Times in 56 Posts	Thank you sir, Ill Try Understand This Schematic and will Modify My Cable, 1 more question, I i have TMA Adapter, Do i need to modify My Cable?

06-05-2009, 20:46	#15 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 15,086 Member: 947561 Status: Offline Thanks: 2,691 Thanked 11,536 Times in 5,053 Posts	If you have the TMA adaptor with the USB cable I think it should be OK.. IF it hasn't the usb you can refer to this thread about how to modify it. Need tma modify v 1.0 There is as well in the TMA website the video about how to modify the TMA to add the external USB power source. BR Alex