| lordceltech | 04-25-2011 00:33 |
E63 Blue Screen done in Blank PPM
E63 Blue Screen done in Blank PPM
Problem
E63 Blue Screen
Tools To Be Used
Cyclone
Ufc
Action Taken
*open Cyclone gui
*click bb5 Broadcom
*Insert BLANK PPM
*CLICK Write all Flash Image
http://img156.imageshack.us/img156/1174/photo0006vf.jpg
http://img215.imageshack.us/img215/4341/e63doneedit.jpg
Code:
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.58, (Mar 28 2011 11:13:30, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0001487
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk19
Initializing security card...
Card Serial Number: D00007F9
Card Firmware Revision: 0109
Card is activated
Box is activated
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing E66_blank_504KB_pmm_10.fpsx (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1090001756DE8D52169A716050A812464DBFE792
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9A28E119033B91D14D22838C86D0D53C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
E66_blank_504KB_pmm_10.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.48.1, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Flashbus Write baud set to 5.0Mbits
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 0.640s
Flashing Speed: 6455.44 kBit/S
Restarting MCU...
Processing E66_blank_504KB_pmm_10.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
CBUS Request Error -> CBUS Problem, Lost handle (Write Pipe)
Handling device: [Cyclone Team], [Cyclone Bootloader]
http://img709.imageshack.us/img709/6858/photo0009r.jpg
Quote:
imageshack PROBLEM
if you have a problem in picture procedure please sign in here to view the pic. ImageShack® - Register then refresh the forum site that's it.
| Quote:
NOTE
wag madaliin ang pag gawa ng thread eto ay ayusin para madali eto maintindihan ng members. eto ay review maigi para maganda ang kalabasan
kung wala detalye o procedure huwag na gawan ng post/thread hindi nakakatulong eto.
| |
