Error flash c5-03.2 - GSM-Forum

turca · 08-21-2012, 13:23

I have error in flash, phone problem: only vibrate but no power

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-719_20.1.024_prd.core.C00 (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 0ED001119BDB034444B877F5CA70E473867E2C8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-719_20.1.024_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
Processing Flash Image Failed ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Process all Image files -> Failed to process RM-719_20.1.024_prd.core.C00

**.:SARCAR:.** · 08-21-2012, 19:41

seems hardware issue (bsi problem) but check with fbus .

08-21-2012, 13:23	#1 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,379 Member: 211017 Status: Offline Thanks Meter: 312	Error flash c5-03.2 I have error in flash, phone problem: only vibrate but no power Processing pre flash tasks... Pre flash tasks finished, continuing... Processing RM-719_20.1.024_prd.core.C00 (CMT)... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001060 CMT_PUBLIC_ID: 0ED001119BDB034444B877F5CA70E473867E2C8D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! RM-719_20.1.024_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5 Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... Processing Flash Image Failed -> The ROM Refused to start Secondary Loader. Common Reasons: 1. Battery voltage is too low. 2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable. 3. Check USB cable quality, connect to USB 2.0 Port 4. It may be also phone hardware problem 5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones) Failed to Process all Image files -> Failed to process RM-719_20.1.024_prd.core.C00

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29

08-21-2012, 19:41	#2 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	seems hardware issue (bsi problem) but check with fbus .