Error to unlock E65 RM-208 - GSM-Forum

richardex78 · 06-24-2011, 23:24

Hello, i tried to unlock this model this is the log:

Check flashing bus

Booting CMT...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F2D792B309FB5C4F6957F8C65431BA080739E797
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC: 1DFD6613
APE_SECURE_ROM_CRC: 2C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1D40010C375C6350CCA520A12D8B023B5A45CE29
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0266638E9C2164FC6B5194ED596A6A251C699896
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...

Unlock
BB5 Unlock Started...
BB5 Unlock Failed -> Phone not detected (FBUS)

I tried several times but nothing. What can i do???. Thanks for all

Mr.3. · 06-25-2011, 01:04

E65 needs more power to get in to local mode . Use tma adapter if possible

richardex78 · 06-25-2011, 01:28

Quote:

Originally Posted by Mr.3.

E65 needs more power to get in to local mode . Use tma adapter if possible

Hello the phone enter in local mode, but not unlock. Thanks

Haicha · 06-25-2011, 01:47

Quote:

Originally Posted by richardex78

Hello the phone enter in local mode, but not unlock. Thanks

See If cable is OK. Connect Charger to Phone and Try.
If don't unlock Flash phone and try again.This phone is
sometimes give this problems to unlock. but Try and use
old Process to unlock.
Regards
Haicha

NADEEM GONDAL · 06-26-2011, 07:46

After Booting phone see if it takes INFO then its in Needed mode else unlock process will not proceed !

06-24-2011, 23:24	#1 (permalink)
richardex78 Freak Poster Join Date: Mar 2010 Posts: 452 Member: 1271770 Status: Offline Thanks Meter: 28	Error to unlock E65 RM-208 Hello, i tried to unlock this model this is the log: Check flashing bus Booting CMT... APE_SYSTEM_ASIC_ID: 17100708 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: F2D792B309FB5C4F6957F8C65431BA080739E797 APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000 APE_BOOT_ROM_CRC: 1DFD6613 APE_SECURE_ROM_CRC: 2C872FD4 CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1D40010C375C6350CCA520A12D8B023B5A45CE29 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_BOOT_ROM_CRC: 273F6D55 CMT_SECURE_ROM_CRC: DFAAF68F CMT Ready! Searching for BootCode: DualLine 32Bit RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using OLD BB5 FLASHING PROTOCOL If software STUCK HERE with box TX LED lit, that means: 1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit Searching for BootCode: DualLine 32Bit FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 0266638E9C2164FC6B5194ED596A6A251C699896 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... Unlock BB5 Unlock Started... BB5 Unlock Failed -> Phone not detected (FBUS) I tried several times but nothing. What can i do???. Thanks for all

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

06-25-2011, 01:04	#2 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,126	E65 needs more power to get in to local mode . Use tma adapter if possible

06-26-2011, 07:46	#5 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	After Booting phone see if it takes INFO then its in Needed mode else unlock process will not proceed !