Help me cyclone team N95 8GB start-up fail. Contact the retailer - GSM-Forum

Carlitos1980 · 12-29-2009, 04:11

N95 8GB dont start-up.
I'll leave the reading of the phone
Help me

I can only do the reading after the flash. Then the phone will start in normal mode, and says contact service. Not enter into test mode.

Flashing successfully finished!
MCU Version V 06wk41v64.1
MCU Date 26-09-08
Product RM-320
Manufacturer (c) Nokia
IMEI 356983015464107
Mastercode 73465677
IMEI Spare 3A65890351641400
IMEI SV 3365890351641410F2000000
PPM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
CNT RM320_31.0.002_U01, rRM320_002_000_M012 ,
PSN SHG550909
Product Code 0557135
Basic Product Code 0548236
PSD 0000000000000000
LPSN 0
WLAN MAC 001CD408566A
APE SW 31.0.015
APE Variant 31.0.01501.01
APE Test rm320_eno_2007wk45v0.020
APE HW 1
APE ADSP 256
APE BT HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU 15
TAHVO 22
AHNE 11
HW 4120i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
PCI i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
UEM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
UPP 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 ,
RFIC 17141715
DSP aino_mc.ICPR62_08w28i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 ,
LCD 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 ,
BT 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
ADSP Sw 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
ADSP DevID 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
ADSP RevID 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 ,
AEM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 ,
Flip MCUSW 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 ,
Simlock Server SIMLOCK SERVER
Simlock Key 2680100000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: OPENED Type: MCC-MNC Data: 26801F
Simlock[2,1] State: OPENED Type: MCC-MNC Data: 26801F

Maiwand khan · 12-29-2009, 08:41

post ur self test log here

Mr.3. · 12-29-2009, 11:26

write PM without 120 & 308 with sx auth

Carlitos1980 · 12-29-2009, 15:14

Hi,
I reading self test.
Thank you for helping me.

Selftests to proceed: 43
Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Failed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_BACKUP_BATT_TEST
Failed ST_CMT_APE_WAKEUP_TEST
Passed ST_SLEEPCLK_FREQ_TEST
Passed ST_RADIO_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Failed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_IQ_TEST
Passed ST_CDSP_TXC_DATA_TEST
Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Failed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_WCDMA_TX_POWER_TEST
Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed ST_CDSP_GSM_TX_POWER_TEST
Passed ST_IR_LOOP_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LPRF_IF_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_CAMERA_ACCELERATOR_TEST
Passed ST_SEC_CAMERA_IF_TEST
Passed ST_CAMERA_AUTOFOCUS_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_MAIN_LCD_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_WLAN_TEST
Passed ST_BT_WLAN_COEXISTENCE_TEST
Passed ST_MASS_MEMORY_IF_TEST
Passed ST_ACCEL_IF_TEST
Passed ST_BT_SLEEP_CLK_TEST
Passed ST_APE_EM_ASIC_TEST
Passed ST_VIBRA_TEST
Selftests done, Tests total: 43, Tests passed: 39, Tests not passed: 4

Carlitos1980 · 12-29-2009, 15:41

I wanted to flash the phone again and I can not.

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-320_31.0.015_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 350C533AE16D683F50104517F3D3B1468241A57D
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 145001116080005847B96358A1D5416FBD346ABC
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
ConfId[32]: 00010800B3DC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Processing Flash Image Failed -> Algorithm was not accepted
Failed to Process all Image files -> Failed to process RM-320_31.0.015_PR.C0R

moulnisky · 12-29-2009, 16:00

Do all the back-ups (rpl from phone, full pm, read all certs)
Check the cable, use the tx2 adapter and select "use TX2" for the flash.

BR

Alex

Carlitos1980 · 12-29-2009, 16:11

I bekups everything but the phone does not accept them.
I always flash bb5 phone with tx2.
The phone no longer accept the beckups, after doing self tests.
Now it appears the screen all white.

moulnisky · 12-29-2009, 16:21

Unplug the box from the usb port and replug it
start again the cyclone suite and retry

BR

Alex

Carlitos1980 · 12-29-2009, 20:08

Good work. But the mobile still say contact retailer.
Is there a solution?
Thanks

moulnisky · 12-29-2009, 20:10

did you try to obtain the sx4 auth now?

BR

Alex

Carlitos1980 · 12-31-2009, 19:10

Hi ..
I tried but the mobile still in contact service.
I can not see, since repair phones with this problem and it does not.
There may be hardware?
Thanks:
confused:

tavoonly · 12-31-2009, 20:42

Quote:

Originally Posted by Carlitos1980

Failed ST_SECURITY_TEST

You have a failure here, you can solve this problem by using SX4 function and writing the fields 1 and 309. Hope this info helps you.

BR,

Mr.3. · 01-01-2010, 07:03

Quote:

Originally Posted by tavoonly

You have a failure here, you can solve this problem by using SX4 function and writing the fields 1 and 309. Hope this info helps you.

BR,

if Security test failed you cant pass SX4 server

Mr.3. · 01-01-2010, 07:06

Quote:

Originally Posted by Carlitos1980

Hi ..
I tried but the mobile still in contact service.
I can not see, since repair phones with this problem and it does not.
There may be hardware?
Thanks:
confused:

its not HW fault...you can recover ur phone with some other boxes

ptt · 01-01-2010, 16:38

Quote:

Originally Posted by Mr.3.

if Security test failed you cant pass SX4 server

You can get SX4 Auth with " Failed ST_SECURITY_TEST "

With simlock / superdongle / IMEI damaged you cant....

The only way to solve security test fail, is writing PM fields 1 & 309 using SX4.... as tavoonly say

BR

12-29-2009, 04:11	#1 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	Help me cyclone team N95 8GB start-up fail. Contact the retailer N95 8GB dont start-up. I'll leave the reading of the phone Help me I can only do the reading after the flash. Then the phone will start in normal mode, and says contact service. Not enter into test mode. Flashing successfully finished! MCU Version V 06wk41v64.1 MCU Date 26-09-08 Product RM-320 Manufacturer (c) Nokia IMEI 356983015464107 Mastercode 73465677 IMEI Spare 3A65890351641400 IMEI SV 3365890351641410F2000000 PPM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , CNT RM320_31.0.002_U01, rRM320_002_000_M012 , PSN SHG550909 Product Code 0557135 Basic Product Code 0548236 PSD 0000000000000000 LPSN 0 WLAN MAC 001CD408566A APE SW 31.0.015 APE Variant 31.0.01501.01 APE Test rm320_eno_2007wk45v0.020 APE HW 1 APE ADSP 256 APE BT HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10. RETU 15 TAHVO 22 AHNE 11 HW 4120i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , PCI i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , UEM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , UPP 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 , RFIC 17141715 DSP aino_mc.ICPR62_08w28i31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 , LCD 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 , BT 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ADSP Sw 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ADSP DevID 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ADSP RevID 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , AEM 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 , Flip MCUSW 31.0.015j31.0.01501.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U01, rRM320_002_000_M012 , ¥RM320_31.0.002_U01, ¥RM320_002_000_M012 , Simlock Server SIMLOCK SERVER Simlock Key 2680100000000000 Simlock Profile 0000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock[1,1] State: OPENED Type: MCC-MNC Data: 26801F Simlock[2,1] State: OPENED Type: MCC-MNC Data: 26801F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N95 "Phone start-up failed. Contact the retailer	.:iTRi:.	Cyclonebox	6	03-06-2010 16:14
please help me big problem n72 phone start-up failed contact the retailer........	swechacnu	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	4	10-07-2009 17:31

12-29-2009, 08:41	#2 (permalink)
Maiwand khan No Life Poster Join Date: Jun 2006 Location: Afghanistan Kabul Posts: 2,196 Member: 295886 Status: Offline Sonork: 100.1583369 Thanks Meter: 1,472	post ur self test log here

12-29-2009, 11:26	#3 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,126	write PM without 120 & 308 with sx auth

12-29-2009, 15:14	#4 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	Hi, I reading self test. Thank you for helping me. Selftests to proceed: 43 Passed ST_UEM_CBUS_IF_TEST Passed ST_EAR_DATA_LOOP_TEST Passed ST_SIM_CLK_LOOP_TEST Passed ST_SIM_IO_CTRL_LOOP_TEST Passed ST_SIM_LOCK_TEST Failed ST_SECURITY_TEST Passed ST_PWR_KEY_TEST Passed ST_CURRENT_CONS_TEST Passed ST_BACKUP_BATT_TEST Failed ST_CMT_APE_WAKEUP_TEST Passed ST_SLEEPCLK_FREQ_TEST Passed ST_RADIO_TEST Passed ST_HOOKINT_TEST Passed ST_BTEMP_TEST Failed ST_MBUS_RX_TX_LOOP_TEST Passed ST_EXT_DEVICE_TEST Passed ST_CDSP_RF_BB_IF_TEST Passed ST_CDSP_RF_SUPPLY_TEST Passed ST_CDSP_TX_IQ_TEST Passed ST_CDSP_TXC_DATA_TEST Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST Failed ST_CDSP_TX_PLL_PHASE_LOCK_TEST Passed ST_CDSP_WCDMA_TX_POWER_TEST Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST Passed ST_CDSP_GSM_TX_POWER_TEST Passed ST_IR_LOOP_TEST Passed ST_KEYBOARD_STUCK_TEST Passed ST_LPRF_IF_TEST Passed ST_CAMERA_IF_TEST Passed ST_CAMERA_ACCELERATOR_TEST Passed ST_SEC_CAMERA_IF_TEST Passed ST_CAMERA_AUTOFOCUS_TEST Passed ST_LPRF_AUDIO_LINES_TEST Passed ST_MAIN_LCD_IF_TEST Passed ST_BT_WAKEUP_TEST Passed ST_WLAN_TEST Passed ST_BT_WLAN_COEXISTENCE_TEST Passed ST_MASS_MEMORY_IF_TEST Passed ST_ACCEL_IF_TEST Passed ST_BT_SLEEP_CLK_TEST Passed ST_APE_EM_ASIC_TEST Passed ST_VIBRA_TEST Selftests done, Tests total: 43, Tests passed: 39, Tests not passed: 4

12-29-2009, 15:41	#5 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	I wanted to flash the phone again and I can not. Processing pre flash tasks... Pre flash tasks finished, continuing... Processing RM-320_31.0.015_PR.C0R (CMT)... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 350C533AE16D683F50104517F3D3B1468241A57D APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 145001116080005847B96358A1D5416FBD346ABC CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 51Kbits Flashbus Read baud set to 98Kbits ConfId[32]: 00010800B3DC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5 Flashbus Write baud set to 4.0Mbits Processing Flash Image Failed -> Algorithm was not accepted Failed to Process all Image files -> Failed to process RM-320_31.0.015_PR.C0R

12-29-2009, 16:00	#6 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Do all the back-ups (rpl from phone, full pm, read all certs) Check the cable, use the tx2 adapter and select "use TX2" for the flash. BR Alex

12-29-2009, 16:11	#7 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	I bekups everything but the phone does not accept them. I always flash bb5 phone with tx2. The phone no longer accept the beckups, after doing self tests. Now it appears the screen all white.

12-29-2009, 16:21	#8 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Unplug the box from the usb port and replug it start again the cyclone suite and retry BR Alex

12-29-2009, 20:08	#9 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	Good work. But the mobile still say contact retailer. Is there a solution? Thanks

12-29-2009, 20:10	#10 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	did you try to obtain the sx4 auth now? BR Alex

12-31-2009, 19:10	#11 (permalink)
Carlitos1980 Insane Poster Join Date: Feb 2009 Posts: 70 Member: 976282 Status: Offline Thanks Meter: 1	Hi .. I tried but the mobile still in contact service. I can not see, since repair phones with this problem and it does not. There may be hardware? Thanks: confused: