nokia n96 big problem need help - GSM-Forum

sameenshah123 · 10-29-2009, 19:50

sir today custmor brought n96 to me he said he remove battry without switching off and then put it back and phone start showing contact retailer. and then he tool it some one to fix it and he flahsed and now when switch one its only lighting on top key pad midel button and when i flashed it its show white screen i dont not have backup and i flash it with version 12 can i flash this phone with hight version . 3.0 i have no idea what real version its had. or any suggestion how to fix it. and phone doesn go to local mode my cable is 1000000%. i did flash lot of phone.

sazr · 10-29-2009, 23:23

first of all flex cable

sameenshah123 · 10-30-2009, 10:38

its not flax cable coz when i did fast repair now phone got to local mode i cant take infor but imei is 123567? i need help plz

sameenshah123 · 10-30-2009, 10:45

and here is fbus check and fast repair downgrade. and self test

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.08, (Oct 26 2009 12:36:39, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000F16
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk10 / wk14
Initializing security card...
Card Serial Number: D0000AB6
Card Firmware Revision: 0109
Card is activated
Box is activated
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Booting RAP...
APE_SYSTEM_ASIC_ID: 008815D3
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: E918324A85647934150A3B8137B82DA616C21314
APE_ROOT_KEY_HASH: 0BBC4203E2D3B82504C75CB65E906A35
APE_ROM_ID: 137A9A3B33259D2C
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 08B00110C66B0052C470FCA478C711929CCA761E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
nomadik8815_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.43.0, Algo: BB5
FlashChip[0,APE]: 0x002000B100000000, ST, NAND
Requested Algorithm: N8815 ALG STNFMS (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
nomadik8815_alg.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: N8815 ALG STNFMS
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 008815D3
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: E918324A85647934150A3B8137B82DA616C21314
APE_ROOT_KEY_HASH: 0BBC4203E2D3B82504C75CB65E906A35
APE_ROM_ID: 137A9A3B33259D2C
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 08B00110C66B0052C470FCA478C711929CCA761E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Backing up simlock...
MCU Version V ICPR72_08w41.2
MCU Date 25-11-08
Product RM-247
Manufacturer (c) Nokia
IMEI 12345610654321?
Simlock backup problem -> '?' is not a valid integer value
Backup simlock thread finished, continuing...
Applying downgrade patch...
Apply downgrade patch failed -> Failed to write patched PM 308
Failed to BB5 Downgrade Repair -> Failed to Patch PM 308
Selftests to proceed: 43
Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_CMT_APE_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_SLEEPCLK_FREQ_TEST
Passed ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_IQ_TEST
Passed ST_CDSP_TXC_DATA_TEST
Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_WCDMA_TX_POWER_TEST
Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed ST_CDSP_GSM_TX_POWER_TEST
Failed ST_KEYBOARD_STUCK_TEST
Passed ST_LPRF_IF_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_SEC_CAMERA_IF_TEST
Passed ST_CAMERA_AUTOFOCUS_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_MAIN_LCD_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_WLAN_TEST
Passed ST_BT_WLAN_COEXISTENCE_TEST
Passed ST_MASS_MEMORY_IF_TEST
Passed ST_ACCEL_IF_TEST
Passed ST_DVBH_TEST
Passed ST_APE_EM_ASIC_TEST
Passed ST_USB_LOOP_TEST
Passed ST_RADIO_TEST
Passed ST_TVOUT_IF_TEST
Selftests done, Tests total: 43, Tests passed: 42, Tests not passed: 1

***moulnisky*** · 10-30-2009, 19:03

The mobiles is with the imei 1234560..
It means error in the PM308 or NPC cert missing...
if you have not any back-up (the customer can ask the person who tried to recover the mobile in the first place if he has any) the only solution is an RPL.

BR

Alex

sameenshah123 · 10-30-2009, 20:36

i dont think the person who did it he make any back up otherwise he could have don it. is there any way to fix it without rpl. no mater imei remain 123456? and even watchdog problem. is there any way to fix it with these problem if not then i will give back this phoen to customer tomorow

**toutou_gsm** · 10-30-2009, 20:39

try to restore certificat,will be found in the stored files

regards,

10-29-2009, 19:50	#1 (permalink)
sameenshah123 No Life Poster Join Date: Oct 2007 Location: South Africa/Pakistan Posts: 2,020 Member: 619308 Status: Online Sonork: 100.1591829 Thanks: 689 Thanked 229 Times in 161 Posts	nokia n96 big problem need help sir today custmor brought n96 to me he said he remove battry without switching off and then put it back and phone start showing contact retailer. and then he tool it some one to fix it and he flahsed and now when switch one its only lighting on top key pad midel button and when i flashed it its show white screen i dont not have backup and i flash it with version 12 can i flash this phone with hight version . 3.0 i have no idea what real version its had. or any suggestion how to fix it. and phone doesn go to local mode my cable is 1000000%. i did flash lot of phone.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Nokia n96 dead, i need help	nacho8310	Cyclonebox	3	09-11-2009 20:01
Nokia 7600. Big problem, need help!	utbracket	Nokia Hardware & Hardware-Repair Area	11	01-05-2009 10:32
703shf big big problem. need help	Siemens man	Sharp 3G (USB-Smart)	13	08-08-2006 23:54
Sagem 835 fm big Problem!! need help, please!	Elgravi	Infineon C16X M51 & ARM7 M52 BASED	1	03-20-2001 23:19

10-29-2009, 23:23	#2 (permalink)
sazr No Life Poster Join Date: Nov 2005 Posts: 946 Member: 203352 Status: Offline Sonork: 100.1609650 Thanks: 206 Thanked 236 Times in 165 Posts	first of all flex cable

10-30-2009, 10:38	#3 (permalink)
sameenshah123 No Life Poster Join Date: Oct 2007 Location: South Africa/Pakistan Posts: 2,020 Member: 619308 Status: Online Sonork: 100.1591829 Thanks: 689 Thanked 229 Times in 161 Posts	its not flax cable coz when i did fast repair now phone got to local mode i cant take infor but imei is 123567? i need help plz

10-30-2009, 10:45	#4 (permalink)
sameenshah123 No Life Poster Join Date: Oct 2007 Location: South Africa/Pakistan Posts: 2,020 Member: 619308 Status: Online Sonork: 100.1591829 Thanks: 689 Thanked 229 Times in 161 Posts	and here is fbus check and fast repair downgrade. and self test Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v1.08, (Oct 26 2009 12:36:39, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags Box Serial Number: C0000F16 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk10 / wk14 Initializing security card... Card Serial Number: D0000AB6 Card Firmware Revision: 0109 Card is activated Box is activated Super DCT4 Activation: TRUE Initializing FBUS... All initialized - Ready to work Booting RAP... APE_SYSTEM_ASIC_ID: 008815D3 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: E918324A85647934150A3B8137B82DA616C21314 APE_ROOT_KEY_HASH: 0BBC4203E2D3B82504C75CB65E906A35 APE_ROM_ID: 137A9A3B33259D2C CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 08B00110C66B0052C470FCA478C711929CCA761E CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: 4B9B75103E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5 Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE nomadik8815_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.43.0, Algo: BB5 FlashChip[0,APE]: 0x002000B100000000, ST, NAND Requested Algorithm: N8815 ALG STNFMS (APE) FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC nomadik8815_alg.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: N8815 ALG STNFMS Box VPP disabled Internal APE Phone VPP Enabled PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE Flashbus Write baud set to 5.0Mbits Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 008815D3 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: E918324A85647934150A3B8137B82DA616C21314 APE_ROOT_KEY_HASH: 0BBC4203E2D3B82504C75CB65E906A35 APE_ROM_ID: 137A9A3B33259D2C CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 08B00110C66B0052C470FCA478C711929CCA761E CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: 4B9B75103E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5 Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits CMT NPC Ok CMT NPC Erased Restarting MCU... Backing up simlock... MCU Version V ICPR72_08w41.2 MCU Date 25-11-08 Product RM-247 Manufacturer (c) Nokia IMEI 12345610654321? Simlock backup problem -> '?' is not a valid integer value Backup simlock thread finished, continuing... Applying downgrade patch... Apply downgrade patch failed -> Failed to write patched PM 308 Failed to BB5 Downgrade Repair -> Failed to Patch PM 308 Selftests to proceed: 43 Passed ST_UEM_CBUS_IF_TEST Passed ST_EAR_DATA_LOOP_TEST Passed ST_SIM_CLK_LOOP_TEST Passed ST_SIM_IO_CTRL_LOOP_TEST Passed ST_SIM_LOCK_TEST Passed ST_SECURITY_TEST Passed ST_PWR_KEY_TEST Passed ST_CURRENT_CONS_TEST Passed ST_BACKUP_BATT_TEST Passed ST_CMT_APE_WAKEUP_TEST Passed ST_HOOKINT_TEST Passed ST_BTEMP_TEST Passed ST_MBUS_RX_TX_LOOP_TEST Passed ST_EXT_DEVICE_TEST Passed ST_CDSP_SLEEPCLK_FREQ_TEST Passed ST_CDSP_SLEEPCLOCK_FREQ_TEST Passed ST_CDSP_RF_BB_IF_TEST Passed ST_CDSP_RF_SUPPLY_TEST Passed ST_CDSP_TX_IQ_TEST Passed ST_CDSP_TXC_DATA_TEST Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST Passed ST_CDSP_WCDMA_TX_POWER_TEST Passed ST_CDSP_RX_IQ_LOOP_BACK_TEST Passed ST_CDSP_GSM_TX_POWER_TEST Failed ST_KEYBOARD_STUCK_TEST Passed ST_LPRF_IF_TEST Passed ST_CAMERA_IF_TEST Passed ST_SEC_CAMERA_IF_TEST Passed ST_CAMERA_AUTOFOCUS_TEST Passed ST_LPRF_AUDIO_LINES_TEST Passed ST_MAIN_LCD_IF_TEST Passed ST_BT_WAKEUP_TEST Passed ST_WLAN_TEST Passed ST_BT_WLAN_COEXISTENCE_TEST Passed ST_MASS_MEMORY_IF_TEST Passed ST_ACCEL_IF_TEST Passed ST_DVBH_TEST Passed ST_APE_EM_ASIC_TEST Passed ST_USB_LOOP_TEST Passed ST_RADIO_TEST Passed ST_TVOUT_IF_TEST Selftests done, Tests total: 43, Tests passed: 42, Tests not passed: 1

10-30-2009, 19:03	#5 (permalink)
*moulnisky* Super Moderator Join Date: Jan 2009 Location: England Age: 48 Posts: 14,843 Member: 947561 Status: Offline Thanks: 2,688 Thanked 11,377 Times in 4,993 Posts	The mobiles is with the imei 1234560.. It means error in the PM308 or NPC cert missing... if you have not any back-up (the customer can ask the person who tried to recover the mobile in the first place if he has any) the only solution is an RPL. BR Alex

10-30-2009, 20:36	#6 (permalink)
sameenshah123 No Life Poster Join Date: Oct 2007 Location: South Africa/Pakistan Posts: 2,020 Member: 619308 Status: Online Sonork: 100.1591829 Thanks: 689 Thanked 229 Times in 161 Posts	i dont think the person who did it he make any back up otherwise he could have don it. is there any way to fix it without rpl. no mater imei remain 123456? and even watchdog problem. is there any way to fix it with these problem if not then i will give back this phoen to customer tomorow

10-30-2009, 20:39	#7 (permalink)
toutou_gsm Product Manager Join Date: Nov 2007 Location: inside nck Posts: 3,785 Member: 628112 Status: Offline Sonork: 100.1589052 Thanks: 4,672 Thanked 3,678 Times in 1,344 Posts	try to restore certificat,will be found in the stored files regards,