GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox

Reply
 
LinkBack Thread Tools Display Modes
Old 03-29-2009, 09:24   #1 (permalink)
No Life Poster
 
NADEEM GONDAL's Avatar
 
Join Date: Aug 2007
Location: England
Posts: 3,672
Member: 575900
Status: Offline
Thanks Meter: 3,173
Arrow Put in this thread all successfull story with Cyclone-box


2600c successfully flashed

Code:
Initializing FBUS...
All initialized - Ready to work
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 846512A58D78F69B88074F0AE0
MSID-Plain: 2C40BAE9004C313DA8000000
FAID-Crypted: BF4D3163FE5588FC5BE1D8AE
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 45.736s
Writing 344 blocks...
All blocks written OK! Time taken 382.260s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.image_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84E532F723441EF8FD29D1B426
MSID-Plain: D26EBAF1004C313DAA000610
FAID-Crypted: 23DA5045D918BA2ED5CA78CC
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 46.226s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 216 blocks...
All blocks written OK! Time taken 94.907s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.ppm_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 84DAB6B25887D312D38E5057E3
MSID-Plain: 3E4EBAE9004C313DA8000000
FAID-Crypted: 504B461EB53F428459579FBE
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.857s
Writing 85 blocks...
All blocks written OK! Time taken 80.536s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK

Last edited by ptt; 01-16-2010 at 22:53. Reason: add code tag
  Reply With Quote
The Following 38 Users Say Thank You to NADEEM GONDAL For This Useful Post:
Show/Hide list of the thanked
Old 03-29-2009, 14:22   #2 (permalink)
Freak Poster
 
green ghost's Avatar
 
Join Date: Feb 2008
Posts: 274
Member: 703551
Status: Offline
Thanks Meter: 68
7390 ALIVE USB FLASHING DONE

Code:
Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
Starting PM read in range 308-308...
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 0.625s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
Proceeding with Alive USB Mode
CMT FlashChip:   0x00EC220C69210000, Samsung
IMEI:    353639016719187
CMT Public ID:   0F900110FFC601548D643461170B00C6A469E756
ROOTKEY Hash for CMT:  BAF3A9C3DBFA8454937DB77F2B8852B1
PAPUBKEYS Hash for CMT:  85566E3CDC7A0435094EFA6CBB2E9DF0D74B11EF
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing rm140__004.510.mcusw (CMT)...
rm140__004.510.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x00000000-0x000202BF, NOR
EraseArea[0,CMT]: 0x00020300-0x000252FF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0037FFFF, NOR
EraseArea[0,CMT]: 0x00380000-0x0143DFFF, NOR
EraseArea[0,CMT]: 0x0143E000-0x0143EFFF, NOR
EraseArea[0,CMT]: 0x0143F000-0x0143FFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
Erase taken 50.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 125.422s
Processing rm140__04.51.ppm_b (CMT)...
rm140__04.51.ppm_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01440000-0x01A3FFFF, NOR
Erase taken 13.812s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 34.125s
Processing rm140__004.51.image_b (CMT)...
rm140__004.51.image_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x02000000-0x03FDFFFF, NOR
EraseArea[0,CMT]: 0x01C80000-0x01FDFFFF, NOR
Erase taken 102.125s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 48.859s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished! 
;)

Last edited by ptt; 01-16-2010 at 22:50. Reason: add code tag
  Reply With Quote
The Following 16 Users Say Thank You to green ghost For This Useful Post:
Show/Hide list of the thanked
Old 03-30-2009, 23:23   #3 (permalink)
Insane Poster
 
Join Date: Feb 2007
Posts: 77
Member: 454648
Status: Offline
Thanks Meter: 18
Unlock Nokia 1208

Code:
Phone is in Local Mode 
MCU Version V 5.32 
MCU Date 05-18-08 
Product RH-106 
Manufacturer (c) NMP 
IMEI 01170100XX288XX 
Asic 11 
HW Signature 6A2751501FDC6F32 
Simlock Server SIMLOCK SERVER 
Simlock Key 7321030000000000 
Simlock Profile 8000000000010002 
Simlock Aux 000B0000 
Simlock IMEI 000001170100XX28XXX0 
Simlock Key Cnt 0 
Simlock FBUS Cnt 0 
Selecting unlock method... 
Search in: C:\Archivos de programa\Cyclone Box\UnlockData\ 
Searching for: RH-106_V 5.32.unlock_img 
Asking card to sign HW Signature... 
Signed OK (F49833DC2BDC9558D109D16C4ABD3622EE0C45F0) 
Writing patch file... 
Booting UPP... 
UPP ID: 2292 [HW_UNKNOWN] 
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM 
Flashbus Write baud set to 100Kbits 
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4 
Box VPP disabled 
Internal Phone VPP Selected 
PLL Factor: 3 
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121 
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514 
Flashbus Write baud set to 1.0Mbits 
Flashbus Read baud set to 51Kbits 
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM 
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84B0A08B8BD80CA43E295E82AD 
MSID-Plain: 3E4EBAE9004702F9AA000000 
FAID-Crypted: 5144158B1021817CA75D2813 
Flashbus Write baud set to 6.50Mbits 
2 Region(s) to erase 
Erasing NOR Region [0x01000000-0x0101FFFF] 
Erasing NOR Region [0x01140000-0x0115FFFF] 
Erase taken 1.906s 
Writing 17 blocks... 
All blocks written OK! Time taken 1.562s 
Terminating flash session 
Box VPP disabled 
Writing SP... 
New SP Accepted OK! 
Phone unlocked OK!

Last edited by ptt; 01-16-2010 at 22:51. Reason: add code tag
  Reply With Quote
The Following 11 Users Say Thank You to fagamon For This Useful Post:
Show/Hide list of the thanked
Old 04-12-2009, 16:25   #4 (permalink)
No Life Poster
 
NADEEM GONDAL's Avatar
 
Join Date: Aug 2007
Location: England
Posts: 3,672
Member: 575900
Status: Offline
Thanks Meter: 3,173
2680c unlocked

Code:
MCU Version	V 04.91
MCU Date	03-09-08
Product		RM-392
Manufacturer	(c) Nokia            
IMEI		353198034310032
Asic		11
HW Signature	BD920D7D3D6DC55F
Simlock Server	SIMLOCK SERVER
Simlock Key	0010100000000000
Simlock Profile	800000000003000B
Simlock Aux	000B5555
Simlock IMEI	00553531980343100300
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-392_V 04.91.unlock_img
Asking card to sign HW Signature...
Signed OK (96271A699FF1E29F9224D0F30B51491523153108)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 2.314s
Writing 10 blocks...
All blocks written OK! Time taken 1.802s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

;)

Last edited by ptt; 01-16-2010 at 22:51. Reason: add code tag
  Reply With Quote
The Following 12 Users Say Thank You to NADEEM GONDAL For This Useful Post:
Show/Hide list of the thanked
Old 04-13-2009, 14:04   #5 (permalink)
No Life Poster
 
oMeR_Rasheed's Avatar
 
Join Date: Mar 2007
Location: Islamic Republic
Age: 29
Posts: 1,812
Member: 466635
Status: Offline
Sonork: 100.1614186
Thanks Meter: 477
N95 8gb falshind whit cayclone box

Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.09v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.43v PASSED
VBAT Voltage 4.82v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 7 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
Failed to read PM -> Failed to read PM Record 308,1
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_20.0.016_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CFD95, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 32.734s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.453s
Restarting MCU...
Processing RM-320_20.0.016_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00001000, NAND
EraseArea[0,APE]: 0x0000D800-0x0000EA00, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 99.188s
Restarting MCU...
Processing RM-320_20.0.016_PR.v22 (CMT)...
Processing RM-320_20.0.016_PR.v22 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.v22, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.625s
Restarting MCU...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (CMT)...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM320_20.0.008_018_xxx_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.656s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 24.641s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06wk41v51.3
MCU Date 13-02-08
Product  RM-320
Manufacturer (c) Nokia
IMEI  12345610654321?
IMEI Spare 1A32541660452301
IMEI SV  1332541660452301F4000000
PPM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 , 
CNT  RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
PSN  0
PSD  0000000000000000
LPSN  0
APE SW  20.0.016
APE Variant 20.0.01622.01
APE Test  rm320_eno_2007wk45v0.020
APE HW  1
APE ADSP 256
APE BT  HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU  15
TAHVO  22
AHNE  11
HW  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 , 
PCI  i20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 , 
UEM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
UPP  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
RFIC  17141715
Failed to read info -> Failed to read extended info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
B.R
SHERRY MOBILES

Last edited by ptt; 01-16-2010 at 22:52. Reason: add code tag
  Reply With Quote
The Following 13 Users Say Thank You to oMeR_Rasheed For This Useful Post:
Show/Hide list of the thanked
Old 04-13-2009, 14:34   #6 (permalink)
No Life Poster
 
mohamed75's Avatar
 
Join Date: Jan 2005
Location: E G Y P T
Age: 41
Posts: 3,149
Member: 102762
Status: Offline
Sonork: 1583079
Thanks Meter: 186
N95 8g flashed successfully with cyclonebox

FLASHING TIME IS ABOUT 4 MINS
HERE IS THE LOG

Code:
Booting RAP...
APE_SYSTEM_ASIC_ID:	 24200705
APE_ASIC_MODE_ID:	 00
APE_PUBLIC_ID:		 DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:	 BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		 00000295
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:		 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
PM Read OK, Time taken 3.984s
Simlock backup problem -> PM Problem
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_31.0.015_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:	 24200705
APE_ASIC_MODE_ID:	 00
APE_PUBLIC_ID:		 DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:	 BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		 00000295
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:		 4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CF385, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 34.625s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.688s
Restarting MCU...
Processing RM-320_31.0.015_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:	 24200705
APE_ASIC_MODE_ID:	 00
APE_PUBLIC_ID:		 DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:	 BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		 00000295
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:		 4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00000FFF, NAND
EraseArea[0,APE]: 0x0000D800-0x0000E9FF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.360s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 98.860s
Restarting MCU...
Processing RM-320_31.0.015_PR.v08 (CMT)...
Processing RM-320_31.0.015_PR.v08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:	 24200705
APE_ASIC_MODE_ID:	 00
APE_PUBLIC_ID:		 DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:	 BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		 00000295
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:		 4B9B75103E691FF8
RM-320_31.0.015_PR.v08, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.94s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 17.375s
Restarting MCU...
Processing RM320_31.0.002_025_xxx_U01_uda.fpsx (CMT)...
Processing RM320_31.0.002_025_xxx_U01_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:	 24200705
APE_ASIC_MODE_ID:	 00
APE_PUBLIC_ID:		 DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:	 BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		 00000295
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:		 4B9B75103E691FF8
RM320_31.0.002_025_xxx_U01_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.672s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 62.172s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
THANKS CYCLONE BOX TEAM FOR THIS PRODUCT

Last edited by ptt; 01-16-2010 at 22:53. Reason: add code tag
  Reply With Quote
The Following 9 Users Say Thank You to mohamed75 For This Useful Post:
Show/Hide list of the thanked
Old 04-13-2009, 17:26   #7 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 218
Member: 582034
Status: Online
Thanks Meter: 18
Tested nokia n77

Code:
Initializing FBUS...
All initialized - Ready to work
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 10 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 3.938s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x0075133D, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 39.94s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 38.703s
Restarting MCU...
Processing RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x0569FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.156s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 80.360s
Restarting MCU...
Processing RM-194_rofx_3.0838.22.0.1_PRD.V06 (CMT)...
Processing RM-194_rofx_3.0838.22.0.1_PRD.V06 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RM-194_rofx_3.0838.22.0.1_PRD.V06, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03E20000-0x0569FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.594s
Restarting MCU...
Processing RM-194_userarea_3.0838.22.0.1.U01 (CMT)...
Processing RM-194_userarea_3.0838.22.0.1.U01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RM-194_userarea_3.0838.22.0.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Started group flash erase
EraseArea[0,APE]: 0x056A0000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.515s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 1.187s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version    V 06wk15v48.4
MCU Date    18-09-08
Product        RM-194
Manufacturer    (c) Nokia.  
IMEI        355524010257210
IMEI Spare    3A55250401522701
IMEI SV        3355250401522721F7000000
PSD        0000001F00000000
WLAN MAC    000100085C01
RETU        15
TAHVO        22
AHNE        30
RFIC        17211721
DSP        metro_06w14pb_07w32
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    FFFFFFFFFFFFFFFF
Simlock Profile    FFFFFFFFFFFFFFFF
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
CONTACT Condisi HANDPHONE Retailer

Last edited by ptt; 01-16-2010 at 22:54. Reason: add code tag
  Reply With Quote
The Following 8 Users Say Thank You to rozhal For This Useful Post:
Show/Hide list of the thanked
Old 04-14-2009, 04:00   #8 (permalink)
Banned
 
Join Date: Feb 2008
Posts: 488
Member: 715429
Status: Offline
Thanks Meter: 258
UNlock Done nokia 1208 rh-106 SW version 5.32 UNlock full 0k

Thks full support for nokias asic B

1200 rh-100(32 seconds in flashing
1208 rh-106 (45 seconds in flashing

cyclone through this team pretty quick repair and flash box
  Reply With Quote
The Following 7 Users Say Thank You to residentdenuevo For This Useful Post:
Show/Hide list of the thanked
Old 04-14-2009, 08:19   #9 (permalink)
No Life Poster
 
oMeR_Rasheed's Avatar
 
Join Date: Mar 2007
Location: Islamic Republic
Age: 29
Posts: 1,812
Member: 466635
Status: Offline
Sonork: 100.1614186
Thanks Meter: 477
N73 flashed whit cyclone box

HERE IS LOG

Code:
 
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.10v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.82v PASSED
VBAT Voltage 0.35v PASSED
VBAT Voltage 5.02v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Flash -> Problem with processing MCU Image file
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Flash -> Problem with processing MCU Image file
Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> No RAW Loader found in given Images, Dead USB Cannot be performed
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
Starting PM read in range 308-308...
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 0.422s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
Proceeding with Alive USB Mode
CMT FlashChip:   0x00EC22E869210000, Samsung
APE FlashChip:   0x00EC00A100800015, Samsung
APE:    17100020
ROOTKEY Hash for APE:  49A97E826B93BA20B7ED0B082475C005
PAPUBKEYS Hash for APE:  5E8D0D504A0902E261268C14FCD8A2C9093523BC
IMEI:    359738004403574
CMT Public ID:   12C00002F4BB0054837D59B9CE86DAA15D275D56
ROOTKEY Hash for CMT:  BAF3A9C3DBFA8454937DB77F2B8852B1
PAPUBKEYS Hash for CMT:  5E8D0D504A0902E261268C14FCD8A2C9093523BC
Sending CMT ADL Certificate and Data...
Sending APE ADL Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (CMT)...
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00080000-0x007314D1, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Erase taken 95.453s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 70.969s
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (CMT)...
Processing N73_userarea_4.0736.3.2.1.U01 (CMT)...
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (APE)...
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Erase taken 1.141s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 189.422s
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (APE)...
N73_rofx_4.0736.3.2.1_PRD.V01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Erase taken 0.313s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 88.750s
Processing N73_userarea_4.0736.3.2.1.U01 (APE)...
N73_userarea_4.0736.3.2.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Erase taken 0.688s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 54.562s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
B.R
SHERRY MOBILES

Last edited by ptt; 01-16-2010 at 22:54. Reason: add code tag
  Reply With Quote
The Following 4 Users Say Thank You to oMeR_Rasheed For This Useful Post:
Show/Hide list of the thanked
Old 04-14-2009, 10:11   #10 (permalink)
Banned
 
Join Date: Apr 2009
Location: Unlock-Sydney.com.au
Age: 30
Posts: 363
Member: 1113892
Status: Offline
Sonork: none
Thanks Meter: 62
Nokia 2626 Successfully Unlocked

Here is Success LOG :

Code:
MCU Version    V 03.51
MCU Date    29-12-06
Product        RM-291
Manufacturer    (c) Nokia.     
IMEI        353935018050583
Asic        11
HW Signature    DD59FDF6CC0B7E49
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    5050100058056920
Simlock Profile    800000000001000B
Simlock Aux    000B5555
Simlock IMEI    00553539350180505800
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-291_V 03.51.unlock_img
Asking card to sign HW Signature...
Signed OK (35405A33E8D9354121B16FA39B4123CEEFE62A4E)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 5.51V 
MSID-Crypted: 845203698F41E5298C95A22BC9
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 67B892708AFAABB9148E39CB
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 1.47s
Writing 8 blocks...
All blocks written OK! Time taken 0.781s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 5.55V 
MSID-Crypted: 845203698F41E5298C95A22BC9
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 67B892708AFAABB9148E39CB
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 1.0s
Writing 8 blocks...
All blocks written OK! Time taken 0.750s
Terminating flash session
Box VPP disabled
Phone unlocked OK!

Last edited by ptt; 01-16-2010 at 22:56. Reason: add code tag
  Reply With Quote
The Following 3 Users Say Thank You to Sydney_Unlocker For This Useful Post:
Show/Hide list of the thanked
Old 04-14-2009, 14:57   #11 (permalink)
No Life Poster
 
oMeR_Rasheed's Avatar
 
Join Date: Mar 2007
Location: Islamic Republic
Age: 29
Posts: 1,812
Member: 466635
Status: Offline
Sonork: 100.1614186
Thanks Meter: 477
2760 unlocked

Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.08v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.99v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
Phone is in Charging Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Local mode set
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Asic  11
HW Signature 1E8CD72D70D12AB5
Simlock Server SIMLOCK SERVER
Simlock Key 2140100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553564010212485900
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-258_V 04.22.unlock_img
Asking card to sign HW Signature...
Signed OK (E906217BFE0EBC2CC7C4726F0E32DF8BB5D066F9)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020881C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x0020881C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020881C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 846FF90F63F0AF333FDF4C6E73
MSID-Plain: 2C40BAE9008985CEA8000000
FAID-Crypted: 783278D3E8ED09DCE518F3D8
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 1.140s
Writing 10 blocks...
All blocks written OK! Time taken 10.31s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
B.R
SHERRY MOBILES

Last edited by ptt; 01-16-2010 at 22:57. Reason: add code tag
  Reply With Quote
The Following User Says Thank You to oMeR_Rasheed For This Useful Post:
Old 04-17-2009, 08:27   #12 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,151
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,951
2610 flashed and unlocked

Code:
MCU Version V 04.90
MCU Date 10-01-07
Product RH-86
Manufacturer (c) Nokia. 
IMEI 355528010258078
IMEI Spare 3A55250801520807
IMEI SV 3355250801520837F2000000
PPM V 04.90, 10-01-07, RH-86_87, (c) Nokia. , IA
CNT Content: ia, V 04.90, 10-01-07, RH-86_87, (c) Nokia. 
PSN KAI508992
Product Code 0533259
Module Code 0202930
Basic Product Code 0530409
PSD 0000000D00000000
HW 9001
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v45
LCD ELBE
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
MSID-Plain: 37DFBAE900524BDDA8000000
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x018DFFFF]
Erasing NOR Region [0x01EE0000-0x01FDFFFF]
Erase taken 74.31s
Writing 554 blocks...
All blocks written OK! Time taken 49.344s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 846D281C1B6776CD75422758E0
MSID-Plain: D26EBAF100524BDDAA000610
FAID-Crypted: F29385FE39D6B837D06AF9AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01B80000-0x01EDFFFF]
Erase taken 21.719s
File Sector Size: 64kB, Flash Chip Sector Size: 64kB
CNT Convertion not needed
Writing 80 blocks...
All blocks written OK! Time taken 7.422s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84E9B23CDE7E311164FC532F72
MSID-Plain: 3E4EBAE900524BDDA9000000
FAID-Crypted: 3601E21465AA21557A188625
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x018E0000-0x01B7FFFF]
Erase taken 19.922s
Writing 99 blocks...
All blocks written OK! Time taken 9.125s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 07.11
MCU Date 05-11-08
Product RH-86
Manufacturer (c) Nokia. 
IMEI 355528010258078
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-86_V 07.11.unlock_img
Asking card to sign HW Signature...
Signed OK (D2884B725A07188A8421A1F7029644DC47E1D238)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.906s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.735s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-16-2010 at 22:57. Reason: add code tag
  Reply With Quote
The Following User Says Thank You to hasnain For This Useful Post:
Old 04-17-2009, 08:28   #13 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,151
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,951
1600 flashed successful

Code:
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_05.030, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84DBDE89E6DC2D8B9AD1092031
MSID-Plain: 3E4EBAE9005594B1AA000000
FAID-Crypted: 46AF0F0088717872898F80F4
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 27.422s
Writing 119 blocks...
All blocks written OK! Time taken 8.953s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh640_nai5.03ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 84896D99FC092F5AEC70DE29E1
MSID-Plain: 3E4EBAE9005594B1A8000000
FAID-Crypted: B344E67BDDBA6189E058A295
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.750s
Writing 9 blocks...
All blocks written OK! Time taken 0.672s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_05.03ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.07V 
MSID-Crypted: 84896D99FC092F5AEC70DE29E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: B344E67BDDBA6189E058A295
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011D0000-0x011DFFFF]
Erasing NOR Region [0x011E0000-0x0137FFFF]
Erase taken 11.735s
Writing 99 blocks...
All blocks written OK! Time taken 7.531s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-16-2010 at 22:58. Reason: add code tag
  Reply With Quote
The Following User Says Thank You to hasnain For This Useful Post:
Old 04-17-2009, 08:29   #14 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,151
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,951
E51 flashed successfully

Code:
MCU Version V 100.15.38.2
MCU Date 02-10-07
Product RM-244
Manufacturer (c) Nokia
IMEI 15.38.2, 02-10-07, RM-244, (c) Nokia
IMEI Spare 33353736363330313233383634353800
IMEI SV 3A75660321834605
ESN OTP 3uf!ƒF
PPM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
PSN SCN012782
Product Code 0552345
Basic Product Code 0545341
PSD 0000000000000000
LPSN 0
WLAN MAC 001CD6316AF5
APE SW 100.34.20
APE Variant 100.34.20100.34.20_v10_1.1
APE Test rm244ENO708.1_100.15.37v020
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0605i, 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
PCI i, 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
UEM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
UPP 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
RFIC 17141715
DSP SI07w15PB_07w38
LCD 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
BT 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP Sw 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP DevID 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP RevID 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
AEM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
Flip MCUSW 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia , 
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 14336 records
[308,0] Reading 50593801 bytes
Failed to read PM -> Failed to read PM Record 308,0
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm244_3003456_prd.c00 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456_prd.c00, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x007FFFFF, ONENAND
EraseArea[0,CMT]: 0x00A00000-0x068FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.78s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS*CORE Certificate...
Writing CMT SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 99.313s
Restarting MCU...
Processing rm244_3003456_prd.c00 (APE)...
Processing rm244_3003456_prd.v08 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456_prd.v08, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Started group flash erase
EraseArea[0,CMT]: 0x04A00000-0x068FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing CMT SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.469s
Restarting MCU...
Processing rm244_3003456_prd.v08 (APE)...
Processing rm244_3003456.01U (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456.01U, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Started group flash erase
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.63s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 6.891s
Restarting MCU...
Processing rm244_3003456.01U (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663012386458
IMEI Spare 3A75660321834605
IMEI SV 3375660321834635F1000000
PPM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
PSN SCN012782
Product Code 0552345
Basic Product Code 0545341
PSD 0000000000000000
LPSN 0
WLAN MAC 001CD6316AF5
APE SW 300.34.56
APE Variant 300.34.56300.34.56_v08
APE Test rm244ENO708.1_100.15.37v020
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0605i, 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
PCI i, 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
UEM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
UPP 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
RFIC 17141715
DSP SI07w15PB_08w26
LCD 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
BT 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP Sw 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP DevID 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP RevID 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
AEM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
Flip MCUSW 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-16-2010 at 22:58. Reason: add code tag
  Reply With Quote
The Following User Says Thank You to hasnain For This Useful Post:
Old 04-17-2009, 08:30   #15 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,151
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,951
N73 flashed ok

Code:
MCU Version V 05wk47v48.3
MCU Date 02-07-07
Product RM-133
Manufacturer (c) Nokia. 
IMEI 356438015501994
IMEI Spare 3A65340851059109
IMEI SV 3365340851059149F0000000
PSN SBJ050558
Product Code 0552007
Module Code 0202855
Basic Product Code 0547471
PSD 0000002200000000
LPSN "
WLAN MAC 000000045E01
RETU 15
TAHVO 22
AHNE 30
HW 6020
RFIC 17211721
DSP scarfe_05wk46v50
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2342000000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x00731951, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 43.937s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.953s
Restarting MCU...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.63s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 82.219s
Restarting MCU...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (CMT)...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_rofx_4.0839.42.2.1_PRD.V08, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.297s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 43.203s
Restarting MCU...
Processing N73_userarea_4.0839.42.2.1.U01 (CMT)...
Processing N73_userarea_4.0839.42.2.1.U01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_userarea_4.0839.42.2.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.641s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 21.984s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk47v61.1
MCU Date 09-07-08
Product RM-133
Manufacturer (c) Nokia. 
IMEI 356438015501994
IMEI Spare 3A65340851059109
IMEI SV 3365340851059179F8000000
PSN SBJ050558
Product Code 0552007
Module Code 0202855
Basic Product Code 0547471
PSD 0000002200000000
LPSN "
RETU 15
TAHVO 22
AHNE 30
HW 6020
RFIC 17211721
DSP scarfe_mc.05wk46v50p2
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2342000000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-16-2010 at 22:59. Reason: add code tag
  Reply With Quote
The Following User Says Thank You to hasnain For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
POST HERE all Successfull Report with Micro-Box, Htc "PRO" cable, itc.. hitibiti Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...) 2096 06-03-2017 14:02
Put in this thread all successfull story of Dct4 Imei???? with Mxkey mobilecitycbk MXKEY Nokia Flasher and Unlocker (by Alim Hape) 1 06-17-2009 21:28
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box FullFLASHgSMPH Cyclonebox 2 04-13-2009 14:00

 



All times are GMT +1. The time now is 06:19.



Powered by Searchlight © 2017 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2015 -
Page generated in 0.91922 seconds with 9 queries

SEO by vBSEO