★★★★★Discussion here>> Mcnpro Box version 3.2.6 ★★★★★ - Page 4 - GSM-Forum

**Mcnbox** · 03-11-2012, 15:06

Could you give me selftest information ?

thanks

Mcnbox

ranen telecom · 03-11-2012, 15:47

Quote:

Originally Posted by Mcnbox

Could you give me selftest information ?

thanks

Mcnbox

Welcome to use McnBox!
Selected COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN************
Firmware V1.15
Checksum 5BEA-72BE
Software V3.26
Box Connected!
Ready working at COM4
Finder Testing ...OK
PWL Testing ...OK
Chip Testing ...OK
Clamps Testing ...OK
Test Finished!

Rap_sa · 03-12-2012, 04:14

SPD not suport read firmware or unlock user code

**Mcnbox** · 03-12-2012, 19:21

Quote:

Originally Posted by ranen telecom

Welcome to use McnBox!
Selected COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN************
Firmware V1.15
Checksum 5BEA-72BE
Software V3.26
Box Connected!
Ready working at COM4
Finder Testing ...OK
PWL Testing ...OK
Chip Testing ...OK
Clamps Testing ...OK
Test Finished!

So , please double check the main cable ! thanks

**Mcnbox** · 03-12-2012, 19:23

Quote:

Originally Posted by Rap_sa

SPD not suport read firmware or unlock user code

for which flash or CPU ?

ranen telecom · 03-13-2012, 14:47

Quote:

Originally Posted by Mcnbox

So , please double check the main cable ! thanks

same problem pin finder canot detect pinout for cpu 6252

**Mcnbox** · 03-13-2012, 22:19

Very strange, box selftest full ok , but other box can detect out, then i have no idea for this ! You may try to contact your reseller for warranty or somehow !

Best regards !

Mcnbox

sumatera · 03-14-2012, 09:22

MTK 6252 Not problem for me....

Code:

Firmware V1.15
Checksum 77C4-5CBE
Software V3.26
Box Connected!
Ready working at COM186
-------------------------------
Start Scanning...
->
Results:
CPU: MT6250
GND:6,RXD:3,TXD:2
[G:6 R:3 T:2] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6252 Ver: CE00  SW:0101
Initialize Boot7 ...
Flash(Nor) Type  [MXIC] MX25U6435E
Flash(Nor) Code  00C20025(00370000)
Flash(Nor) Size  0x00800000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
GXQ52_6432_10A_PCB01_GPRS_MT6252_S01.YD215_STD_L01_V006.BIN_FLNMX25U6435E
Read Done !
Time used:  2 mins 7 s
File Saved: C:\SpiderMan_v3.0\FlashFiles\mtk\mito_588_GXQ52_6432_10A_PCB01_GPRS_MT6252_S01.YD215_STD_L01_V006.BIN_FLNMX25U6435E
Press and Holding Power button now !
Connecting, wait...
CPU: 6252 Ver: CE00
CPUID: 00000700
Release Power Button now
Phone detected
Infr: MT6252_YD215_STD_L01_V006_GXQ52_6432_10A_HW_Melody_V0.0
NV Data saved to: C:\SpiderMan_v3.0\FlashFiles\mtk\NV_mito_588_MT6252_YD215_STD_L01_V006_GXQ52_6432_10A_HW_Melody_V0.0
Backup Done.
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6252 Ver: CE00  SW:0101
Initialize Boot7 ...
Flash(Nor) Type  [MXIC] MX25U6435E
Flash(Nor) Code  00C20025(00370000)
Flash(Nor) Size  0x00800000 Hex Bytes
Start Formatting (Nor)...
Start Addr: 0x748000, Size: 0xB8000
Format Done !
Press and Holding Power button now !
Connecting, wait...
CPU: 6252 Ver: CE00
CPUID: 00000700
Release Power Button now
Phone detected
UnLock Code  1122
Done

sumatera · 03-14-2012, 09:26

Mstar Chip nice too.....

Code:

Firmware V1.15
Checksum 77C4-5CBE
Software V3.26
Box Connected!
Ready working at COM186
User Abort
Scanning pin status,please waiting...
->
Pin-status Scan Done
Scanning,waiting...
->
Operation done, Pin detect out.
BOOT : 4  USB D-: 2   USB D+: 3   Mstar MSW853X
Total expend 14 seconds
[G:5 D-:2 D+:3 Up:4] Apply to Box
If Scan other phone, please click [Stop]
[G:5 D-:2 D+:3 Up:4] Apply to Box
[G:5 D-:2 D+:3 Up:4] Apply to Box
Connecting, wait...
Connect Ok.
Initialize boot...
Boot OK!
Flash Type NOR
Flash ID 00014400
Flash Model SPANSION_S71WS128P`
Flash Size 0x1000000(16,0M)
Start Reading...
Read Done!
File saved: C:\SpiderMan_v3.0\FlashFiles\mtk\etouch_529pro_Mstar_SPANSION_S71WS128P`.bin
Format addr Set Error.
Connecting, wait...
Connect Ok.
Initialize boot...
Boot OK!
Flash Type NOR
Flash ID 00014400
Flash Model SPANSION_S71WS128P`
Flash Size 0x1000000(16,0M)

sumatera · 03-14-2012, 09:32

Mtk 6236 just ok...

Code:

Firmware V1.15
Checksum 77C4-5CBE
Software V3.26
Box Connected!
Ready working at COM186
-------------------------------
Start Scanning...
->
Results:
CPU: MT6236.
RXD:6,TXD:4,BOOT:1
[R:6 T:4 Up:1] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6236 Ver: 8A02  SW:8A00
Initialize Boot7 ...
Flash(Nand) Type  [HYNIX] HYD0SQG0MF1P
Flash(Nand) Code  00AD00B1(00000055)
Flash(Nand) Size  0x08400000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Size: 0x8400000
Start Reading(Nand)...
Read done !
total: 39 mins 5 s
File saved: C:\SpiderMan_v3.0\FlashFiles\mtk\mito 808.bin

Connecting, wait...
Phone detected, wait..
CPU: 6236 Ver: 8A02  SW:8A00
Initialize Boot7 ...
Flash(Nand) Type  [HYNIX] HYD0SQG0MF1P
Flash(Nand) Code  00AD00B1(00000055)
Flash(Nand) Size  0x08400000 Hex Bytes
Start formatting (Nand) ...
Formatting Nand Flash...5000000--2FFFFFF
Format (nand) Done!

hacell · 03-14-2012, 10:57

@sumatera

Thanks for test and good report

Br

A Salam · 03-14-2012, 13:38

mt6252

Firmware V1.15
Checksum 77C4-5CBE
Software V3.26
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->

not support

mantok · 03-19-2012, 07:04

trying to find usb pin out spd 6620 , but can't find too

try many time , i used spiderman ,just in 3 second, but their software not supported new flash chip yet

mantok · 03-19-2012, 07:06

@product supporter please fix that problem, too bad for your customer cause nothing new in your update

wasting so much time just for find pin out on mcn box

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29

03-11-2012, 15:06	#46 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	Could you give me selftest information ? thanks Mcnbox

03-12-2012, 04:14	#48 (permalink)
Rap_sa Junior Member Join Date: Dec 2010 Posts: 30 Member: 1473903 Status: Offline Sonork: 8854789 Thanks Meter: 6	SPD not suport read firmware or unlock user code

03-13-2012, 22:19	#52 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	Very strange, box selftest full ok , but other box can detect out, then i have no idea for this ! You may try to contact your reseller for warranty or somehow ! Best regards ! Mcnbox

03-14-2012, 10:57	#56 (permalink)
hacell No Life Poster Join Date: Oct 2009 Location: love me if you can Posts: 722 Member: 1150088 Status: Offline Sonork: ============ Thanks Meter: 254	@sumatera Thanks for test and good report Br

03-14-2012, 13:38	#57 (permalink)
A Salam Freak Poster Join Date: Oct 2009 Location: Indonesia Raya Age: 41 Posts: 181 Member: 1132223 Status: Offline Thanks Meter: 77	mt6252 Firmware V1.15 Checksum 77C4-5CBE Software V3.26 Box Connected! Ready working at COM3 ------------------------------- Start Scanning... -> not support

03-19-2012, 07:04	#58 (permalink)
mantok Freak Poster Join Date: Mar 2006 Posts: 306 Member: 251293 Status: Offline Thanks Meter: 16	trying to find usb pin out spd 6620 , but can't find too try many time , i used spiderman ,just in 3 second, but their software not supported new flash chip yet

03-19-2012, 07:06	#59 (permalink)
mantok Freak Poster Join Date: Mar 2006 Posts: 306 Member: 251293 Status: Offline Thanks Meter: 16	@product supporter please fix that problem, too bad for your customer cause nothing new in your update wasting so much time just for find pin out on mcn box