GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   McnPro Box (http://forum.gsmhosting.com/vbb/f532/)
-   -   ★★★★★Discussion here>> Mcnpro Box version 3.2.8 ★★★★★ (http://forum.gsmhosting.com/vbb/f532/discussion-here-mcnpro-box-version-3-2-8-a-1464095/)

Mcnbox 04-23-2012 11:47

★★★★★Discussion here>> Mcnpro Box version 3.2.8 ★★★★★
 
Mcnpro Box official version 3.2.8 Released


What's new for Mcnpro box version 3.2.8 ?


  • Add Support MTK 6573/6516/6513 etc.(Beta)
  • Update boot7 support more new flash ICs
  • Improved MTK USB Pin-find function
  • Improved MTK IMEI Change read /write bugs
  • Fix Spreadtrum 6800H read /write bugs
  • Fix Spreadtrum format bugs
  • Spreadtrum new Flash ICs added
  • Other small report bugs fixed



Upgrading from Previous Versions:


  • Version of 3.2.8 request install Suite version 2.1.1 at first, As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !



Best regards !

Mcnbox

DinOlabs 04-23-2012 12:45

I can not download from the support.link the alternative please :)


br,

sandulxxx 04-23-2012 12:47

nice update MCN TEAM...thanks

sandulxxx 04-23-2012 12:58

Quote:

Originally Posted by DinOlabs (Post 8346055)
I can not download from the support.link the alternative please :)


br,

mediafire link Mcnpro_Box_3.2.8.rar :)

ashakaass 04-23-2012 14:36

test................
 
4 Attachment(s)
tested flashing mtk6252 use usb only , no scan usb, no rx tx ,use boot key ,by ashakaas

http://forum.gsmhosting.com/vbb/atta...1&d=1335242083

http://forum.gsmhosting.com/vbb/atta...1&d=1335242083

http://forum.gsmhosting.com/vbb/atta...1&d=1335242083


error flashing

http://forum.gsmhosting.com/vbb/atta...1&d=1335242083

dharyadi 04-23-2012 16:18

read with old version FAILED http://forum.gsmhosting.com/vbb/8332237-post53.html

WORK WITH THIS VERSION

UNLOCK
READ
FORMAT
READ/WRITE IMEI

THANK FOR THE UPDATED
Code:

Welcome to use McnBox!
Selected COM31
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010112xxxxx
Firmware V1.15
Checksum 8036-AEBE
Software V3.28
Box Connected!
Ready working at COM31
-------------------------------
Start Scanning...
->.....
Results:
CPU: MT6253.
GND:5,RXD:3,TXD:2
[G:5 R:3 T:2] Apply to Box
Press and Holding Power button now !
Connecting, wait...
CPU£ºMT6253 Ver: 8A02  SW:8A00
Release Power Button now
Phone detected
UnLock Code  123795
Done
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02  SW:8A00
Initialize Boot6 ...
Flash(Nor) Type  [TOSHIBA] TC58FYM7T8C
Flash(Nor) Code  0098009E(00000000)
Flash(Nor) Size  0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
5605AT_PCB01_GPRS_MT6253_S00.5605AT_SW_F3_V09_110330.BIN_FLNPF38F3040M0Y3DF
Read Done !
Time used:  4 mins 10 s
File Saved: F:\FIRMWARE\CHINESE PHONE BACKUP\GSTAR\Q91_5605AT_PCB01_GPRS_MT6253_S00.5605AT_SW_F3_V09_110330.BIN_FLNPF38F3040M0Y3DF
2nd method, please turn off the phone before rd/wr
Press and Holding Power button now !
Connecting, wait...
CPU£ºMT6253 Ver: 8A02  SW:8A00
Release Power Button now
Phone detected
Read IMEI1 Done: 30910806007753-3
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02  SW:8A00
Initialize Boot6 ...
Flash(Nor) Type  [TOSHIBA] TC58FYM7T8C
Flash(Nor) Code  0098009E(00000000)
Flash(Nor) Size  0x01000000 Hex Bytes
Start Formatting (Nor)...
Start Addr: 0xE00000, Size: 0x200000
Format Done !
Press and Holding Power button now !
Connecting, wait...
CPU£ºMT6253 Ver: 8A02  SW:8A00
Release Power Button now
Phone detected
Wr IMEI1 Done: 30910806007753-3


twentyonecell 04-23-2012 16:51

read mito 801

Code:

Start Scanning...
>>->..
User Abort
Scanning pin status,please waiting...
->..........
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2  USB D+: 3  VID:0E8D&PID:0003
Press [ Save ] to save Pinout
Total expend 0 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
MTK Serial Port: COM25
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6252 Ver: CB02  SW:0101
Initialize Boot7 ...
Flash(Nor) Type  [GIGA] GD25LQ64
Flash(Nor) Code  00C80060(00170000)
Flash(Nor) Size  0x00800000 Hex Bytes
Start Reading(Nor)...
The phone information:
RATECH52_6432_10A_PCB01_GPRS_MT6252_S01.X239_CQ_1147_B5_V07_111202ZE.BIN
Read Done !
Time used:  0 mins 25 s
File Saved: G:\backup cpf box\mito\801\RATECH52_6432_10A_PCB01_GPRS_MT6252_S01.X239_CQ_1147_B5_V07_111202ZE.BIN

old version can"t detected the pin

twentyonecell 04-23-2012 16:57

read TOM i7 new

Code:

Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2  USB D+: 3  VID:0E8D&PID:0003
Press [ Save ] to save Pinout
Total expend 0 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
MTK Serial Port: COM25
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6252 Ver: D000  SW:0101
Initialize Boot7 ...
Flash(Nor) Type  [WINBOND] W25Q64DW
Flash(Nor) Code  00EF0060(00170000)
Flash(Nor) Size  0x00800000 Hex Bytes
Start Reading(Nor)...
The phone information:
HONGYU52_11B_GEMINI64_PCB01_GPRS_MT6252_S01.C720C0_JT09_C503C_TOM_120305.BIN
Read Done !
Time used:  0 mins 25 s
File Saved: G:\backup cpf box\TOM\i7\HONGYU52_11B_GEMINI64_PCB01_GPRS_MT6252_S01.C720C0_JT09_C503C_TOM_120305.BIN


Mcnbox 04-23-2012 21:13

Quote:

Originally Posted by ashakaass (Post 8346401)


Backup file write back met this error or ?

Mcnbox 04-23-2012 21:17

Please try this phone , thanks

http://www.pasadena-cell.com/members...8-mito-318.jpg

ashakaass 04-24-2012 06:57

becup ok ,write back error
 
Quote:

Originally Posted by Mcnbox (Post 8347526)
Backup file write back met this error or ?


beckup ok ,write back beckup file error, test hp normal (ok)

Mcnbox 04-24-2012 12:20

Quote:

Originally Posted by ashakaass (Post 8348190)
beckup ok ,write back beckup file error, test hp normal (ok)


Please sigin to yahoo, i send u new version for test , thanks!



Best regards !

Mcnbox

A Salam 04-24-2012 13:42

Quote:

Originally Posted by Mcnbox (Post 8347533)



rx tx scan not support

Welcome to use McnBox!
Selected COM3
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxxxxx
Firmware V1.15
Checksum xxxxxxxxxxx
Software V3.28
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
>>->..........
User Abort


full supported with usb scan :D

Start Scanning...
>>->..........
User Abort
Scanning pin status,please waiting...
->....................
Pin-status Scan Done
Scanning,waiting...
->=...
Operation done, Pin detect out.
USB D-: 4 USB D+: 6 VID:0E8D&PID:0003
Total expend 4 seconds
[G:8 10 D-:4 D+:6] Apply to Box
If Scan other phone, please click [Stop]



thank's pollll mr.Elnino & MCN team

joxzin ory 04-25-2012 20:10

test write phone maxtron mg223(spd 6800hi)
Welcome to use McnBox!
Selected COM7
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN
Firmware V1.15
Checksum 1EA1-39BE
Software V3.28
Box Connected!
Ready working at COM7
Scanning pin status,please waiting...
->.............................
Pin-status Scan Done
Scanning,waiting...
->@[email protected]
Operation done, Pin detect out.
BOOT£º5
USB D-: 3 USB D+: 4 Spread
Press [ Save ] to save Pinout
Total expend 7 seconds
...
->#..
...
->#...
Not found "BOOT"
[G:8 9 D-:3 D+:4 Down:5] Apply to Box
If Scan other phone, please click [Stop]
Pinout has been cleared
Scanning,waiting...
->@[email protected]
Operation done, Pin detect out.
BOOT£º5
USB D-: 3 USB D+: 4 Spread
Press [ Save ] to save Pinout
Total expend 7 seconds
...
->#..
...
->#...
Not found "BOOT"
[G:8 9 D-:3 D+:4 Down:5] Apply to Box
If Scan other phone, please click [Stop]
Checking USB Serial port, wait...
SCI USB2Serial Port: COM9
Connecting, wait...
Phone Connected!
Info: SPRD3
Initialize boot12...
Boot Done.
Flash Type NAND
Start Writing...Format Zone
Write Done!
phone not power on

habib.habib88 04-27-2012 01:52

Write: Erase Set ERR3
 
Quote:

Welcome to use McnBox!
Selected COM3
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN************
Firmware V1.15
Checksum 9B23-BBBE
Software V3.28
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->.
Results:
MTK Chipset CPU: MT6253.
GND:10,RXD:5,TXD:7
[G:10 R:5 T:7] Apply to Box
The File Information:
DEWAV53_09A_D2068_PCB01_GPRS_MT6253_S00.E2055_E800 _L201.BIN
>>
The File Information:
DEWAV53_09A_D2068_PCB01_GPRS_MT6253_S00.E2055_E800 _L201.BIN
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [SAMSUNG] K5N2833ATB
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Erase Set ERR3


Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [SAMSUNG] K5N2833ATB
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:460800 Done.
Erase Set ERR3



Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [SAMSUNG] K5N2833ATB
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:230400 Done.
Erase Set ERR3


Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [SAMSUNG] K5N2833ATB
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:115200 Done.
Erase Set ERR3

for team, please update bug fix
thanks


All times are GMT +1. The time now is 02:46.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.33175 seconds with 5 queries

SEO by vBSEO