GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > McnPro Box

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 06-27-2012, 07:03   #1 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Arrow ★★★★★Discussion here>> Mcnpro Box version 3.3.0 ★★★★★


What's new for Mcnpro box version 3.3.0 ? New!! Hot!!


  • Add CoolSand CPU complete supported
    • Read / Write
    • IMEI Change
    • Format
    • Unlock
    • Factory Set
    • Read Code
  • Spreadtrum new Flash ICs added (6610/20)
  • Spreadtrum read/write bugs fixed (6800H)
  • Spreadtrum bootloader improved(880xG)
  • MTK new Rx/Tx pin detection method added
  • MTK read /write bugs fixed (For New CPU)
  • Other small report bugs fixed
    Quote:
    Welcome to use McnBox!
    Selected COM9
    Baud setting ...
    Set Baud done
    Initialize in progress ...
    Checking data ...
    Serial No. MCNxxxxxxxxxxxx
    Firmware V1.15
    Checksum 15B9-21BE
    Software V3.30
    Box Connected!
    Ready working at COM9
    ...



Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!




Best regards !


Mcnbox Team
 
The Following 25 Users Say Thank You to Mcnbox For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2012, 07:09   #2 (permalink)
Freak Poster
 
pshycoboy's Avatar
 
Join Date: Jun 2011
Location: ilution
Posts: 343
Member: 1597314
Status: Offline
Thanks Meter: 112
nice update mcn team,thx for mcn pro box new update...
 
The Following 3 Users Say Thank You to pshycoboy For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2012, 07:14   #3 (permalink)
Freak Poster
 
Join Date: Feb 2007
Posts: 178
Member: 447517
Status: Offline
Thanks Meter: 22
thx u for this update.....
 
The Following User Says Thank You to medariy For This Useful Post:
Old 06-27-2012, 07:23   #4 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Thanks, we hope all customer to report the bugs, post Successfully unlocked/repaired phones by Mcnpro Box at here !


Best regards !

Mcnbox Team
 
Old 06-27-2012, 07:34   #5 (permalink)
Freak Poster
 
mubashar757's Avatar
 
Join Date: Dec 2011
Age: 34
Posts: 446
Member: 1702642
Status: Offline
Sonork: 100.1638878
Thanks Meter: 85
thanks good update....................
 
Old 06-27-2012, 07:41   #6 (permalink)
Freak Poster
 
sandulxxx's Avatar
 
Join Date: Apr 2010
Location: WESTJAVA - INDONESIA
Posts: 486
Member: 1278042
Status: Offline
Sonork: 100.1656045
Thanks Meter: 109
great update...YOU DO CUSTOMER NEEDED....!!!!
 
Old 06-27-2012, 07:44   #7 (permalink)
Freak Poster
 
pshycoboy's Avatar
 
Join Date: Jun 2011
Location: ilution
Posts: 343
Member: 1597314
Status: Offline
Thanks Meter: 112
fastpin finder mtk 6253,,so cool...


Welcome to use McnBox!
Selected COM3
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No.xxxxxxxxxx
Firmware V1.15
Checksum 5BEB-73BE
Software V3.30
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->.....
Results:
CPU: MT6253.
GND:5,RXD:3,TXD:2,BOOT:1
[G:1 5 R:3 T:2] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [SPANSION] S29VS128R_T
Flash(Nor) Code 0001007E(00630001)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
BVTTECH53_09B_GEMINI_PCB01_GPRS_MT6253_S00.MAUI_09 B_W10_12_MP_V3.BIN_FLNS71VS128RC0AHK4L0
Checksum Error in 00EB4000
File Saved: D:\file china\gvon 677\read mcn


what this error info?this phone normal,just iwant tes this update..
 
Old 06-27-2012, 07:53   #8 (permalink)
Mj2
Major Poster
 
Join Date: Jun 2010
Location: East Java
Posts: 46
Member: 1331507
Status: Offline
Thanks Meter: 4
thanks sir for update,.. fast detect pin and read mtk 6253

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxx
Firmware V1.15
Checksum Axxx
Software V3.30
Box Connected!
Ready working at COM9
-------------------------------
Start Scanning...
->........
Results:
CPU: MT6253.
GND:10,RXD:3,TXD:1
[G:10 R:3 T:1] Apply to Box
[G:10 R:3 T:1] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [TOSHIBA] TC58FYM7T8C
Flash(Nor) Code 0098009E(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
UNISCOPE53_09A_PCB01_GPRS_MT6253_S00.V53B76.BIN_FL NTY6701111184KC
Read Done !
Time used: 4 mins 22 s
File Saved: D:\firmware\Mcn\cross cb 95t\UNISCOPE53_09A_PCB01_GPRS_MT6253_S00.V53B76.BI N_FLNTY6701111184KC
Press and Holding Power button now !
Connecting, wait...
CPUMT6253 Ver: 8A02 SW:8A00
Release Power Button now
Phone detected
Infr: MT6253_V53B76_09A_HW_Melody_V0.0
NV Data saved to: D:\firmware\Mcn\cross cb 95t\NV_MT6253_V53B76_09A_HW_Melody_V0.0
Backup Done.
 
The Following User Says Thank You to Mj2 For This Useful Post:
Old 06-27-2012, 08:00   #9 (permalink)
Freak Poster
 
pshycoboy's Avatar
 
Join Date: Jun 2011
Location: ilution
Posts: 343
Member: 1597314
Status: Offline
Thanks Meter: 112
stop in 91%,,,phone normal,just i want tes and back updata...

 
Old 06-27-2012, 08:03   #10 (permalink)
Freak Poster
 
pshycoboy's Avatar
 
Join Date: Jun 2011
Location: ilution
Posts: 343
Member: 1597314
Status: Offline
Thanks Meter: 112
Quote:
Originally Posted by Mj2 View Post
thanks sir for update,.. fast detect pin and read mtk 6253

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxx
Firmware V1.15
Checksum Axxx
Software V3.30
Box Connected!
Ready working at COM9
-------------------------------
Start Scanning...
->........
Results:
CPU: MT6253.
GND:10,RXD:3,TXD:1
[G:10 R:3 T:1] Apply to Box
[G:10 R:3 T:1] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02 SW:8A00
Initialize Boot6 ...
Flash(Nor) Type [TOSHIBA] TC58FYM7T8C
Flash(Nor) Code 0098009E(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
UNISCOPE53_09A_PCB01_GPRS_MT6253_S00.V53B76.BIN_FL NTY6701111184KC
Read Done !
Time used: 4 mins 22 s
File Saved: D:\firmware\Mcn\cross cb 95t\UNISCOPE53_09A_PCB01_GPRS_MT6253_S00.V53B76.BI N_FLNTY6701111184KC
Press and Holding Power button now !
Connecting, wait...
CPUMT6253 Ver: 8A02 SW:8A00
Release Power Button now
Phone detected
Infr: MT6253_V53B76_09A_HW_Melody_V0.0
NV Data saved to: D:\firmware\Mcn\cross cb 95t\NV_MT6253_V53B76_09A_HW_Melody_V0.0
Backup Done.
woooow,,my pc error?ok thx i try againt
 
Old 06-27-2012, 08:05   #11 (permalink)
Registered User
 
Join Date: Jan 2008
Posts: 124
Member: 692785
Status: Offline
Thanks Meter: 20
wowwwwwww so very nice update!!!*** job mcn pro team.
 
Old 06-27-2012, 08:11   #12 (permalink)
Junior Member
 
Join Date: Sep 2007
Location: T-THINK cell
Posts: 10
Member: 588102
Status: Offline
Thanks Meter: 2
Tested for SPRD3 6800H

Welcome to use McnBox!
Selected COM7 COM6
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxxx
Firmware V1.15
Checksum ED52-CABE
Software V3.30
Box Connected!
Ready working at COM7
[G:8 9 D-:3 D+:4 Up:12 Down:5] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM8
Connecting, wait...
Phone Connected!
Info: SPRD3
Initialize boot12...
Boot Done.
Flash Type NAND (0)
Start Writing...Code
Write Done!
 
The Following User Says Thank You to Agunk Radical For This Useful Post:
Old 06-27-2012, 08:14   #13 (permalink)
Major Poster
 
Join Date: Dec 2011
Location: kolombia
Posts: 46
Member: 1706888
Status: Offline
Sonork: 100.1624068
Thanks Meter: 16
good news that the wait ...........


always successful MCNPro Team


thanks
 
Old 06-27-2012, 08:54   #14 (permalink)
No Life Poster
 
umarnlw's Avatar
 
Join Date: Dec 2005
Location: Narowal Punjab Pakistan
Posts: 2,992
Member: 207708
Status: Offline
Sonork: 100.1602241
Thanks Meter: 664
nice update and keep it more up
 
The Following User Says Thank You to umarnlw For This Useful Post:
Old 06-27-2012, 09:04   #15 (permalink)
Crazy Poster
 
Join Date: May 2011
Posts: 48
Member: 1584470
Status: Offline
Thanks Meter: 6
great job my bro... thanks to update


br,
 
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 10-14-2017 19:29
I neeeeed NCDS 2.0!!!! plzz!!!! ratzfatz Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 06-16-2011 09:59
How unlock new nokia5110 version 5.20 ? Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 3 01-21-2011 06:45
I CAN UNLOCK 1,2,3,4 FOR ANY PHONE 40 (1+) -- 30 (20+) andrew bennett Main Sales Section 1 07-26-1999 19:33
How unlock Nokia version 5.20 Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 07-17-1999 17:35

 



All times are GMT +1. The time now is 15:39.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.46272 seconds with 9 queries

SEO by vBSEO