★★★★★Discussion here>> Mcnpro Box version 3.3.2 ★★★★★ - Page 3 - GSM-Forum

**Mcnbox** · 07-27-2012, 10:57

Btw, MTK 6577 also complete supported !

Best regards !

Mcnbox

Saggio Fenola · 07-27-2012, 11:29

Link mediafire

Download Mcnpro_Box_3.3.2.rar

Malik Irfan85 · 07-27-2012, 13:52

NIce effory again Mcn team.

umarnlw · 07-28-2012, 08:59

nice update and keep it more up

**Mcnbox** · 07-28-2012, 09:18

I hope someone can test 65xx (like 6516 with 5 pin USB)then post result , thanks

bencebacsi · 07-29-2012, 01:43

I tried to write flash on some MT6516 phones, but I always get the same error message. I tried to use all kinds of Flash Set settings as the lowest baud rate too, but without success.

MT6516 File
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: MT6516 Ver: 8A01 SW:8A01
Initialize Boot8 ...
Flash(Nand) Type [HYNIX] HYD0SQG0MF1P
Flash(Nand) Code 002C00BA(00800055)
Flash(Nand) Size 0x10800000 Hex Bytes
comm error code 2001

I also tried to find rx/tx pins on two kinds of MT6516 phones with 5-pin microUSB connector (STAR A9 and A6000) but I was not successful nor by MCN Box neither by other boxes.

How can I write back a full flash backup to an MT6516 phone?

linhip.linhip · 07-29-2012, 05:57

hep Download Mcnpro_Box_Suite_version_2.1.2_installer

.::jagdeep-Gupta::. · 07-29-2012, 08:07

Quote:

Originally Posted by bencebacsi

I tried to write flash on some MT6516 phones, but I always get the same error message. I tried to use all kinds of Flash Set settings as the lowest baud rate too, but without success.

MT6516 File
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: MT6516 Ver: 8A01 SW:8A01
Initialize Boot8 ...
Flash(Nand) Type [HYNIX] HYD0SQG0MF1P
Flash(Nand) Code 002C00BA(00800055)
Flash(Nand) Size 0x10800000 Hex Bytes
comm error code 2001

I also tried to find rx/tx pins on two kinds of MT6516 phones with 5-pin microUSB connector (STAR A9 and A6000) but I was not successful nor by MCN Box neither by other boxes.

How can I write back a full flash backup to an MT6516 phone?

brother sold rx tx point on phone and check if the phone have five pin jack some phone with five pin connector not find rx tx with jack so we have to use this mannual procedure to find rx txand always use latest ver for good result try and post result

br
mcn lightbox

bencebacsi · 07-29-2012, 22:09

Quote:

Originally Posted by .::jagdeep-Gupta::.

brother sold rx tx point on phone and check if the phone have five pin jack some phone with five pin connector not find rx tx with jack so we have to use this mannual procedure to find rx txand always use latest ver for good result try and post result

br
mcn lightbox

I know that of course (I'm quite not a beginner) and I can solder, but Mcnbox asked for some results using the 5-pin USB socket. I'm still not able to write back a readed full flash file on MT6516 phones. That's my real problem.

awicell · 07-30-2012, 08:37

thankyou verymuch mr imformasion update by mcn

mooyjc · 07-30-2012, 18:07

thanks for the updates, we hesitate not to have had mcnprobox which has issued a new box, to keep our confidence has mcnprobox, with the ability to balance the mcnprolight. make us proud to have your product.

.::jagdeep-Gupta::. · 07-31-2012, 08:28

Quote:

Originally Posted by bencebacsi

I know that of course (I'm quite not a beginner) and I can solder, but Mcnbox asked for some results using the 5-pin USB socket. I'm still not able to write back a readed full flash file on MT6516 phones. That's my real problem.

ok. bro i dont have this cpu phone in my hand i will check if i get phone i will make video for our user how to work with usb on this cpu !

br
mcn lightbox

ashakaass · 07-31-2012, 14:50

coolsand ct1128 write error boot

awicell · 08-01-2012, 10:46

MCN did not get through on the cpu coolsand please update

awicell · 08-01-2012, 10:49

cpu read coolsand 73% error by phone please Forland solution

07-31-2012, 14:50	#43 (permalink)
ashakaass Freak Poster Join Date: Nov 2011 Location: indonesia Posts: 258 Member: 1695196 Status: Offline Sonork: 100.1623915 Thanks Meter: 509	coolsand ct1128 error coolsand ct1128 write error boot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29

07-27-2012, 10:57	#31 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	Btw, MTK 6577 also complete supported ! Best regards ! Mcnbox

07-27-2012, 11:29	#32 (permalink)
Saggio Fenola Freak Poster Join Date: Jul 2010 Location: east_java Posts: 169 Member: 1342669 Status: Offline Thanks Meter: 109	Link mediafire Download Mcnpro_Box_3.3.2.rar

07-27-2012, 13:52	#33 (permalink)
Malik Irfan85 No Life Poster Join Date: Jan 2011 Location: in your Heart Posts: 2,220 Member: 1484062 Status: Offline Sonork: 1610135 Thanks Meter: 218	NIce effory again Mcn team.

07-28-2012, 08:59	#34 (permalink)
umarnlw No Life Poster Join Date: Dec 2005 Location: Narowal Posts: 3,317 Member: 207708 Status: Offline Sonork: 100.1602241 Thanks Meter: 1,005	nice update and keep it more up

07-28-2012, 09:18	#35 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	I hope someone can test 65xx (like 6516 with 5 pin USB)then post result , thanks

07-29-2012, 01:43	#36 (permalink)
bencebacsi Freak Poster Join Date: Aug 2008 Location: Hungary Posts: 320 Member: 829361 Status: Offline Thanks Meter: 107	I tried to write flash on some MT6516 phones, but I always get the same error message. I tried to use all kinds of Flash Set settings as the lowest baud rate too, but without success. MT6516 File Press and Holding Power button now ! Connecting, wait... Phone detected, wait.. CPU: MT6516 Ver: 8A01 SW:8A01 Initialize Boot8 ... Flash(Nand) Type [HYNIX] HYD0SQG0MF1P Flash(Nand) Code 002C00BA(00800055) Flash(Nand) Size 0x10800000 Hex Bytes comm error code 2001 I also tried to find rx/tx pins on two kinds of MT6516 phones with 5-pin microUSB connector (STAR A9 and A6000) but I was not successful nor by MCN Box neither by other boxes. How can I write back a full flash backup to an MT6516 phone?

07-29-2012, 05:57	#37 (permalink)
linhip.linhip Junior Member Join Date: Jun 2012 Posts: 21 Member: 1768860 Status: Offline Thanks Meter: 4	hep Download Mcnpro_Box_Suite_version_2.1.2_installer

07-30-2012, 08:37	#40 (permalink)
awicell Junior Member Join Date: Jun 2012 Posts: 22 Member: 1777466 Status: Offline Sonork: puchase Thanks Meter: 4	thankyou verymuch mr imformasion update by mcn

07-30-2012, 18:07	#41 (permalink)
mooyjc Insane Poster Join Date: Dec 2009 Location: .: SUNDANIS-JAVA Island :. Posts: 60 Member: 1192818 Status: Offline Thanks Meter: 17	thanks for the updates, we hesitate not to have had mcnprobox which has issued a new box, to keep our confidence has mcnprobox, with the ability to balance the mcnprolight. make us proud to have your product.

08-01-2012, 10:46	#44 (permalink)
awicell Junior Member Join Date: Jun 2012 Posts: 22 Member: 1777466 Status: Offline Sonork: puchase Thanks Meter: 4	MCN did not get through on the cpu coolsand please update

08-01-2012, 10:49	#45 (permalink)
awicell Junior Member Join Date: Jun 2012 Posts: 22 Member: 1777466 Status: Offline Sonork: puchase Thanks Meter: 4	cpu read coolsand 73% error by phone please Forland solution