How is working ADI Chips with McnPro Box >> - GSM-Forum

**Mcnbox** · 05-31-2009, 18:09

1. Open Mcnpro Box main software .Start to scan phone , Apply info.(this time you need holding phone Power on Key)

2. Now you can see Software automatic convert to ADI interface ( Included related target boot )

3. Start to unlock or format phone before we need readout the phone Flash. Press Direct read ,and keep press power on Key , don't leave your finger away from power on Key(This is very important).

A . IF the phone switch on, still keep holding power on Key, just disconnect "+" from battery connector and reconnect "+" to battery connect.
B . Or disconnect "+" and cable , phone will be go to switch off, pulg in cable , you can see software ready start going to downloading boot. then connect "+" to battery connect.

Now Please waiting a few mins. then save the Bin file to computer.

4. Steup for unlock . Press the unlock and select the saved file which we read above. then you can get the phone unlock code , manual type into phone, Phone unlocked .

5. For format need make backup before .

6. For flash just choose the related flashfile then press Flash button

Enjoy Easy plug / play games.

Best Regards !

Mcnbox Team

elhadjioumar · 05-31-2009, 19:58

hi ; not work for me . Please try to test it with " MSP430 Herc/Ath " i've test many phones many times like you say without success.It detects the pinouts but the phone always switch on on "read" process.So it display " Read Flash id Error 1 " THANKS

**PhoneCareCenter** · 05-31-2009, 20:45

@elhadjioumar
Try To Keep your finger Pressed on the Power Button during all Operations...... Try to post Logs Here.

Good Luck

elhadjioumar · 05-31-2009, 21:09

Your explainations are clears and too easy to be executed but it don't work for me.That's why i ask you to test the soft with " MSP430 Herc/Ath "target please.I've 20 pieces with me and I have the same problem with all them.

**PhoneCareCenter** · 05-31-2009, 21:20

Contact me in Private, will see how best I can help u out....

**Mcnbox** · 05-31-2009, 21:51

Quote:

Originally Posted by elhadjioumar

hi ; not work for me . Please try to test it with " MSP430 Herc/Ath " i've test many phones many times like you say without success.It detects the pinouts but the phone always switch on on "read" process.So it display " Read Flash id Error 1 " THANKS

Quote:

Originally Posted by elhadjioumar

Your explainations are clears and too easy to be executed but it don't work for me.That's why i ask you to test the soft with " MSP430 Herc/Ath "target please.I've 20 pieces with me and I have the same problem with all them.

@elhadjioumar

If problem still not fix yet !
Then Post Flash Type or better take a PCB picture of you phone .

Thanks

elhadjioumar · 05-31-2009, 22:20

Quote:

Originally Posted by Mcnbox

@elhadjioumar

If problem still not fix yet !
Then Post Flash Type or better take a PCB picture of you phone .

Thanks

this is a picture of one the phones that i tested .The soft detect it like "Adi MSP430 Herc/Ath"

elhadjioumar · 05-31-2009, 22:34

Quote:

Originally Posted by elhadjioumar

this is a picture of one the phones that i tested .The soft detect it like "Adi MSP430 Herc/Ath"

thi is the log:

Welcome to use McnBox!
serial port now: COM14
S/N:MCN20******* - D0*** Firmware Ver:V1.01 CheckSum:952E-B6BE
Box Connected !
The Box High-speed Serial port: COM14
-------------------------------
Scanning (please waiting...)
->...
Scanning results:
Type:Herc/Ath
GND:1 5 10 12 13,RXD:7,TXD:9
>>[G:1 5 10 12 13 R:7 T:9] Apply to Box

Holding power-key...
Connected OK
DownLoading boot...
Boot OK
>>Read Flash id Error 1

**PhoneCareCenter** · 06-01-2009, 01:05

@elhadjioumar

As we can see, Phone is Detected & Boot is loaded Perfectly. Try Taking a Picture of the PCB and post it here, make sure Cpu & Flash Ic's are Clearly Visible.... All new Flash Types will be added A.S.A.P.

McnPro Team

**Mcnbox** · 06-02-2009, 04:12

Quote:

Originally Posted by elhadjioumar

this is a picture of one the phones that i tested .The soft detect it like "Adi MSP430 Herc/Ath"

hi , friend

I had test .check here is the logs :

Code:

 
  Holding power-key...
  Connected OK
  DownLoading boot...
  Boot   OK
  Flash   ID: 00980095
  Flash Types: TOSHIBA TC58FVB641XB( 0x800000 )
>>Reading...

BTW, be sure you press the power on button as well .

**PhoneCareCenter** · 06-02-2009, 15:45

U can also try Use the Latest Version of McnPro Software..

Good Luck

elhadjioumar · 06-04-2009, 13:52

Quote:

Originally Posted by PhoneCareCenter

U can also try Use the Latest Version of McnPro Software..

Good Luck

HI.YOUR SOFT DON'T WORK I TRIED ALL POSSIBLE TEST IN VAIN .
BUT I HAVE SUCCESS WITH SPIDER CRAKED.IT CONFIRM MCN DETECT THE ADI & SPD BUT CANNOT READ IT. THERE'S LONG DAYS I TRY TO EXPLAIN U THIS BUT YOU NEVER TRY TO BELIEVE ME .NOW I HOPE U WILL DO. MAY BE IT WILL HELP U TO SOLVE MY PROBLEM .

ps: I USE MCN USB SCAN FOR CONNECTION

**PhoneCareCenter** · 06-04-2009, 15:29

@elhadjioumar

SpreadTrum & ADI are very much Supported by McnPro Software, Tested on over 200pcs before Release. For ADI Chips just keep Power Button Pressed, am sure thats a Simple Instruction.
As for SpreadTrum, there have been no complains, not here, not on our other Forums. We have Posted Instructions on How to Use McnPro Software,we also told u to post Picture of PCB to help u solve the problem.
I also told u to Contact me on Messanger for Fast Support & Step by Step Instructions.
Guess u choose not to be helped.

elhadjioumar · 06-04-2009, 16:05

Quote:

Originally Posted by PhoneCareCenter

@elhadjioumar

SpreadTrum & ADI are very much Supported by McnPro Software, Tested on over 200pcs before Release. For ADI Chips just keep Power Button Pressed, am sure thats a Simple Instruction.
As for SpreadTrum, there have been no complains, not here, not on our other Forums. We have Posted Instructions on How to Use McnPro Software,we also told u to post Picture of PCB to help u solve the problem.
I also told u to Contact me on Messanger for Fast Support & Step by Step Instructions.
Guess u choose not to be helped.

I'm the only one who write on this section of the forum and u say I don't want to be helped.......I've add your adress on messenger for trying to contact u but your statut is everytime offline...my adress is " [email protected] "

**PhoneCareCenter** · 06-04-2009, 18:46

@elhadjioumar

I'm Online 18hours Everyday Bro... Almost all Users Contact me on Messanger, anyway if ever u need Fast help. U know where to find me.

Good Luck
McnPro Team

05-31-2009, 18:09	#1 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	How is working ADI Chips with McnPro Box >> 1. Open Mcnpro Box main software .Start to scan phone , Apply info.(this time you need holding phone Power on Key) 2. Now you can see Software automatic convert to ADI interface ( Included related target boot ) 3. Start to unlock or format phone before we need readout the phone Flash. Press Direct read ,and keep press power on Key , don't leave your finger away from power on Key(This is very important). A . IF the phone switch on, still keep holding power on Key, just disconnect "+" from battery connector and reconnect "+" to battery connect. B . Or disconnect "+" and cable , phone will be go to switch off, pulg in cable , you can see software ready start going to downloading boot. then connect "+" to battery connect. Now Please waiting a few mins. then save the Bin file to computer. 4. Steup for unlock . Press the unlock and select the saved file which we read above. then you can get the phone unlock code , manual type into phone, Phone unlocked . 5. For format need make backup before . 6. For flash just choose the related flashfile then press Flash button Enjoy Easy plug / play games. Best Regards ! Mcnbox Team

06-01-2009, 01:05	#9 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	@elhadjioumar As we can see, Phone is Detected & Boot is loaded Perfectly. Try Taking a Picture of the PCB and post it here, make sure Cpu & Flash Ic's are Clearly Visible.... All new Flash Types will be added A.S.A.P. McnPro Team Last edited by PhoneCareCenter; 06-01-2009 at 01:39.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How is working OM CPU with Mcnpro Box >>	Mcnbox	McnPro Box	0	07-19-2009 10:08
<< How is working Anyka CPU with Mcnpro Box	Mcnbox	McnPro Box	0	07-04-2009 10:40
How is working Spreadtrum CPU with Mcnpro Box >>	Mcnbox	McnPro Box	2	06-30-2009 18:17
How is working INFINEON Chips with McnPro Box >>	Mcnbox	McnPro Box	0	06-02-2009 08:32
How to Format MTK Chips with Mcnpro Box >>	PhoneCareCenter	McnPro Box	9	04-10-2009 18:58

05-31-2009, 19:58	#2 (permalink)
elhadjioumar Freak Poster Join Date: Jan 2006 Location: Sénégal Dakar Posts: 350 Member: 217769 Status: Offline Thanks Meter: 24	hi ; not work for me . Please try to test it with " MSP430 Herc/Ath " i've test many phones many times like you say without success.It detects the pinouts but the phone always switch on on "read" process.So it display " Read Flash id Error 1 " THANKS

05-31-2009, 20:45	#3 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	@elhadjioumar Try To Keep your finger Pressed on the Power Button during all Operations...... Try to post Logs Here. Good Luck

05-31-2009, 21:09	#4 (permalink)
elhadjioumar Freak Poster Join Date: Jan 2006 Location: Sénégal Dakar Posts: 350 Member: 217769 Status: Offline Thanks Meter: 24	Your explainations are clears and too easy to be executed but it don't work for me.That's why i ask you to test the soft with " MSP430 Herc/Ath "target please.I've 20 pieces with me and I have the same problem with all them.

05-31-2009, 21:20	#5 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	Contact me in Private, will see how best I can help u out....

06-02-2009, 15:45	#11 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	U can also try Use the Latest Version of McnPro Software.. Good Luck

06-04-2009, 15:29	#13 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	@elhadjioumar SpreadTrum & ADI are very much Supported by McnPro Software, Tested on over 200pcs before Release. For ADI Chips just keep Power Button Pressed, am sure thats a Simple Instruction. As for SpreadTrum, there have been no complains, not here, not on our other Forums. We have Posted Instructions on How to Use McnPro Software,we also told u to post Picture of PCB to help u solve the problem. I also told u to Contact me on Messanger for Fast Support & Step by Step Instructions. Guess u choose not to be helped.

06-04-2009, 18:46	#15 (permalink)
PhoneCareCenter Product Manager Join Date: Aug 2007 Location: Inside Java Posts: 1,187 Member: 574123 Status: Offline Sonork: 100.1581804 Thanks Meter: 1,839	@elhadjioumar I'm Online 18hours Everyday Bro... Almost all Users Contact me on Messanger, anyway if ever u need Fast help. U know where to find me. Good Luck McnPro Team