Mcnpro Box official version 3.5.9 Released (ChinaRes V1.3.0)

[Mcnbox]

Mcnpro Official v2.5 RC2 Free update !

- Improved boot for MTK
- Add new decrypt method for MTK
- Add new driver into installer
- Fix bugs for Anyka
- Improve USB detection speed


New version Please download from support section !


Support area :

• Have 400 Gb ++ flash files available.
• Free download all Nokia flash files for all our customers.

Gift for Thomas Pkey user and Mcnpro box User.

More detail check here :
http://forum.mcnbox.com/t136.html#post150

More and more news (Free gift) coming soon !!!!!


Promotion for Apr. : 235USD free shipping all of world !

Reseller be welcome !


WBR.,

Mcnbox Team !

[Mcnbox]

Now you can use the new free update version v2.5 RC4
(Mcnpro Official v2.5 RC3 is a beta test version , so we did not release that on public.)



What's new for this update:

• Added some new decrypted mothed

• Improved boot,supported more new flash chip

• Improve USB detection to more fast

• Mcnpro Box hardware firmware update to 1.01, after install the new version , First time to use box which will be automatic finish update

After update you will see below logs:

S/N:MCNxxxxxxx - xxxx Firmware Ver:V1.01 CheckSum:xxxx-xxxx

Which mean's your box already get new firmware version. of course, you can use firmware update / repair firmware get the older version back any time. but our best recommend to use the last version will be more stable.

Please note, When box updating don't disconnect power supply or power off the box

Get the new verison from download section ,More new update coming soon ...


WBR.,

Mcnbox Team

[Mcnbox]

Mcnpro Official v2.6.3 released - New free update !!!

• Add new flash types for Anyka
• Add new flash types for ADI
• Add new flash types for MTK
• Improve Infineon decrypt method.
• Improve decrypt method for MTK (6235, CPUID=0FFFFFFF 6225)
• Bugs fix

Please download the last version from support section !

More new update coming soon ...


Best regards !

Mcnbox Team

[Mcnbox]

Mcnpro Official v2.6.4 released !!!

This is bug fix release , Fix SPD chips after detect not allow to read issue !

Suggest all customers use this version , and more news coming soon !!!

Thanks all customer report and support us !


Mcnbox team

[Mcnbox]

Mcnpro Box Official v2.6.5 Released

What's new for this update:

• Added /Improved New MTK NAND/NOR detection method.
  
  
• Improved boot, more new flash chip supported for MTK.
  
  
• Software display fonts type issue fixed.
  
  
• New cables definition added.
  
  
• Mcnpro Box hardware firmware update to 1.03, after install the new version , First time to use box which will be automatic finish update

After update you will see below logs:

S/N:MCNxxxxxxx - xxxx Firmware Ver:V1.03 CheckSum:xxxx-xxxx

Please note, When box updating don't disconnect power supply or power off the box

Best Regards


Mcnbox Team

[Mcnbox]

Mcnpro Box Official v2.6.6 Released

What's new for this update:

• Improved MTK decrypt method to be more stable.
  
  
• Box hardware firmware update to 1.04, after install the new version , First time to use box which will be automatic finish update

logs:

S/N:MCNxxxxxxx - xxxx Firmware Ver:V1.04 CheckSum:xxxx-xxxx

Please note, When box updating don't disconnect power supply or power off the box

Best Regards


Mcnbox Team

[Mcnbox]

Mcnpro Official v2.6.8 released !!!

• Add new decrypt method for MTK
• IMEI fucntion changed for MTK (Two Sim support)
• Some bugs fixed
• New cable definition added.

Please download the last version from support section !

More new update coming next few days.


Best regards !

Mcnbox Team

[Mcnbox]

Mcnpro Official v2.7.0 released !!!

• Add Si4904 Software platform
• Add new decrypt method for MTK (Should be work very well for all mtk cpu/chips now)
• Add Phone general information Reading function for MTK
• Add Pickroof lock code reading function for MTK
• Badsoftware issue complete fixed
• IMEI change fucntion (MTK) bugs fixed

Special thanks to all friend who help test the 2.6.9 beta version.

More new update coming next few days. like SPD ADI and so on.

Please download the last version from support section !



Best regards !

Mcnbox Team

[Mcnbox]

Mcnpro Box Version 2.7.1 released !

Regarding some (new/old) functions / bugs Add / Changes / Improving etc , Although it's not exactly according to the published release timetable, having been somewhat delayed because we are working on Developing new Spreadtrum Software platform. Now it's the time release to all of our customer. And we thank you for your ongoing patience. Of course other new version ready in testing now and be going release in next few weeks.

Issues resolved by 2.7.1 include the following:

• New beta Ver. of Spreadtrum Software platform Add.
• IMEI Change function Add for Spreadtrum
• Improved bootloader for Spreadtrum chips
• Add new decrypt method for Spreadtrum
• Spreadtrum old version still keep inside and Other bugs fixed

Upgrading from Previous Versions:

Version of 2.7.1 is a maintenance release. so we are recommend all customers running prior versions upgrade to last version be more stability!

Download 2.7.1 Versions:

As usual, 2.7.1 is available for all customers with valid, To download that from support section !

Any problem of our new version please make a post at here



Best regards !

Mcnbox Team

[Mcnbox]

Mcnpro Box Version 2.7.2 released !

This is a bugs fix / Improved version from 2.7.1.

Issues resolved by 2.7.2 include the following:

• IMEI Change bugs fixed for Spreadtrum
• Improved bootloader for Spreadtrum chips

Upgrading from Previous Versions:

Version of 2.7.2 is a maintenance release. so we are recommend all customers running prior versions upgrade to last version be more stability!

Download 2.7.2 Versions:

As usual, 2.7.2 is available for all customers with valid, To download that from support section !

Any problem of our new version please make a post at here



Best regards !

Mcnbox Team

[Mcnbox]

Version 2.7.5 beta include the following:

• Fix bugs for the Spreadtrum(New beta version.)
• Improved bootloader for Spreadtrum chips (old version)
• Add new decrypt method (SC6600RT 6226A) for Spreadtrum (old version)
• Box Hardware Firmware version update V1.05

After update you will see below info:

Firmware version: V1.05

Upgrading from Previous Versions:

Version of 2.7.5 is a maintenance release. so we are recommend all customers running prior versions upgrade to last version be more stability!

Download 2.7.5 Beta Versions:

As usual, 2.7.5 is available for all customers with valid, To download that from support section !

Next few days we will be Improve others , like Infineon Anyka ADI etc. Any problem please make a post at related section


Best regards !

Mcnbox Team

[PhoneCareCenter]

Version 2.7.6 include the following:

* Fix bugs for the Spreadtrum SC8800
* Improve Spreadtrum WT6226A Read /Write
* Anyka Read /Write function improved
* Change Read/Backup procedure for MTK (After backup / Read then saving the data files)



Upgrading from Previous Versions:

Version of 2.7.6 is a Maintenance Release. We recommend all customers running prior versions to upgrade to latest version to be more stable.

Download 2.7.6 Versions:

As usual, 2.7.6 is available for all customers, Download that from support section !


New updates are coming soon. If u find any problem with our new version please post on McnPro Section in this Forum.

[Mcnbox]

Version 2.7.6a include the following:

* Fix bugs for Spreadtrum chipset during Read /Write
* Improve MTK Read /Write speed
* Add support new cables (5pcs)


Upgrading from Previous Versions:

Version of 2.7.6a is a Maintenance bugs Release. We recommend all customers running prior versions to upgrade to latest version to be more stable.


Download 2.7.6a Versions:

As usual, 2.7.6a is available for all customers, Download that from support section !




Ps. Please contact our reseller for the new cables (5pcs), you just need pay the delivery cost , cables are free for you !


New updates are coming soon. If you find any problem with our new version please post on McnPro Section.

[PhoneCareCenter]

Mcnpro Box Official v2.7.7 Includes

*CDMA Read/Write & Unlock. (Models will be Added, as there are many CDMA Phones in Market)
*MTK Second Cpu Pinout Detection Added
*MTK Read/Write PhoneBook Function Added (Test Version)
*Few Bugs Fixed

Download 2.7.7 Version

As usual, 2.7.7 is available for all Customers, Download that from Support Section !
Also Available from Official Rapidshare Area

Upgrading from Previous Versions

We Recommend that u Upgrade to this version.
Instructions:
Extract McnBox Software to C:\Program Files\Mcnbox Team\Mcnpro Box

Extract MCNBox_EX106 to C:\Program Files\Mcnbox Team\Mcnpro Box\Box_data\boxbin

More New Features will be Added in few Days, meanwhile Enjoying the Christmas Season with McnPro Team.

McnPro Team

[Mcnbox]

Today we're announcing the availability of Mcnpro Box Version 2.7.8 Release. we know it's not exactly according to the published release timetable, had been a little be delayed, so thanks for your understanding & patience during this process.


Version 2.7.8 include the following:

• MTK 6238 6239 6251 6253 read & write operations improved
• Bugs fixed for MTK 6235 read & write,new firmware types supported
• Bootloader 5 detection & Nor flash read operation improved ,eg. Samsung & Spansion flash
• Add Bootloader 6 special supported for MTK 6253 (6223D in testing)
• Touch calibration operations improved / enable for this version
• Infineon platform detection operations improved
• CDMA unlock operations improved
• CDMA write operations improved
• Res Editor (Language editor) disabled (Will be enable when it's ready & properly tested ,should be next version)
• Added logs saving function (By mouse right-hand button)
• Improved software interface
• Corrected other small reported bugs.

Upgrading from Previous Versions:

Version of 2.7.8 is a Maintenance bugs Release. We recommend all customers running prior versions to upgrade to latest version to be more stable.


Download 2.7.8 Versions:

As usual, 2.7.8 is available for all customers, Download that from support section !




If you find any problem with our new version please post on McnPro Section.


@To all Forum menber & customer
Spring Festival holidays coming, Send our team best regards for you and your family, also thanks for your long time supporting





Happy new year !

Mcnbox team.