[Succes] flashing Cross PD5 (SPD6800H) w/ usb cable+mcnbox
 

full support read, flash, format cpu spd6800h with mcnbox

1. release phone battery
2. press and hold volume down button, then plug in usb cable phone to pc
3. install driver "sci_usb2serial" if not yet installed
3. see phone connected to com ??? remember or you can see at device manager
4. change comm port at mcnbox (same as on step 3)
5. phone ready for executed (read flash, write flash and format)

tested by me.

http://www.kudusflasher.net/index.ph...43.0;attach=29

here tes read log CROSS PD-5

Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2 USB D+: 3 Spread
Press [ Save ] to save Pinout
Total expend 2 seconds
...
->#..
...
->#........
Not found "BOOT"
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Checking USB Serial port, wait...
SCI USB2Serial Port: COM59
Connecting, wait...
Phone Connected!
Info: SPRD3
Initialize boot12...
CPU Info 6800H
Flash Type NAND
Flash ID 00AD00A1
Flash Model HYNIX_H8BCS0CG0MBR
Flash Size 0x8400000(132.0M)
Start Reading...
Read Done!
File saved: G:\backup cpf box\cross\PD-5\6800H_HYNIX_H8BCS0CG0MBR.bin

THx FOR SHARING ;)
GREAT WORK

frimware ada gan lgi butuh ni cross PD 5

Firmware CROSS PD 5 cpu spd, disini gan

Thank's you are willing to share the link

hatur tengqiew boss firmwarenya

work visss :D nice very well :)