GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > McnPro Box


Reply
 
LinkBack Thread Tools Display Modes
Old 04-25-2009, 19:49   #1 (permalink)
No Life Poster
 
fokal2008's Avatar
 
Join Date: Jan 2009
Location: cameroon
Posts: 1,773
Member: 953931
Status: Offline
Sonork: 1652252
Thanks Meter: 897
Arrow Successfully unlocked/repaired phones by Mcnpro Box !


good work with mcnpro you are the tools for chiness mobile
see logs
Writing, Please Power Off & On
Connected
Boot Information:
downloading Boot
CPU Type: 6600D
Flash Type: SAMSUNG K5L2931CAM
Flash Type: SAMSUNG K5L2931CAM
Flsh Size??01000000(Hex Bytes)
Baudrate set to:921600
Erase Nor Flash...
Erase OK??Time: 97 s
Writing(amd Nor)...
Write OK
>>Time£º 35 m27 s

i need to say tanks for phonecarecenter!!!!!!!
big tanks for you helps
  Reply With Quote
The Following 3 Users Say Thank You to fokal2008 For This Useful Post:
Show/Hide list of the thanked
Old 05-04-2009, 17:32   #2 (permalink)
No Life Poster
 
fokal2008's Avatar
 
Join Date: Jan 2009
Location: cameroon
Posts: 1,773
Member: 953931
Status: Offline
Sonork: 1652252
Thanks Meter: 897
Arrow

SPD FORMATING OK WITH MCNPRO BOX.
Formatting, Please Power Off & On
Connected
Boot Information:
downloading Boot
CPU Type: 6600D
Flash Type: SAMSUNG K5L2931CAM
Flash Type: SAMSUNG K5L2931CAM
Flsh Size??01000000(Hex Bytes)
Baudrate set to:921600
Formatting Nor Flash...
>>Nor Format completed
  Reply With Quote
The Following 2 Users Say Thank You to fokal2008 For This Useful Post:
Old 05-04-2009, 17:35   #3 (permalink)
No Life Poster
 
fokal2008's Avatar
 
Join Date: Jan 2009
Location: cameroon
Posts: 1,773
Member: 953931
Status: Offline
Sonork: 1652252
Thanks Meter: 897
Arrow

MTK FORMATING OK WITH MCNPRO BOX.
MODE VOL AFTER FORMATING OK PHONE WILL WORK PERFECTLY



you can Set Formatting Addr manully
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU??6223 Ver: 8A04
CPU ID??7BDE0C00
Downloading Boot...
Nor Flash Code: 00EC257E(25062501)
Nor Flash Size: 0x00800000 Hex Bytes
INT/EXT RAM Size: 0x0000A000+0x00400000
Formatting Nor Flash...
Format Start Addr??0x700000, Size: 0x100000

>>Formatted OK.
  Reply With Quote
The Following 2 Users Say Thank You to fokal2008 For This Useful Post:
Old 07-13-2009, 16:41   #4 (permalink)
Product Manager
 
PhoneCareCenter's Avatar
 
Join Date: Aug 2007
Location: Inside Java
Posts: 1,187
Member: 574123
Status: Offline
Sonork: 100.1581804
Thanks Meter: 1,839
MTK 6223 CPU

Read Firmware:

Please Hold "ON" to connect with the phone...
<<if CPU is 6223D May Be Not Supported>>
Connected to Phone.
CPU: 6223 Ver: 8A05 SW:8A00
CPU ID: 7E8C0C00
Downloading Boot...
Nor Flash Code: 0001227E(22212201)
Nor Flash Size: 0x01000000 Hex Bytes
INT/EXT RAM Size: 0x0000A000+0x00400000
Verifying Baud...
Set Baud:921600 OK.
Reading(Nor)...
Read OK.
>>total: 4 mins23 s


Formating:

you can Set Formatting Addr manully
Please Hold "ON" to connect with the phone...
<<if CPU is 6223D May Be Not Supported>>
Connected to Phone.
CPU: 6223 Ver: 8A05 SW:8A00
CPU ID: 7E8C0C00
Downloading Boot...
Nor Flash Code: 0001227E(22212201)
Nor Flash Size: 0x01000000 Hex Bytes
INT/EXT RAM Size: 0x0000A000+0x00400000
Formatting Nor Flash...
Format Start Addr: 0xC40000, Size: 0x3C0000
>>Formatted OK.

McnPro Team
  Reply With Quote
The Following 2 Users Say Thank You to PhoneCareCenter For This Useful Post:
Old 07-13-2009, 16:53   #5 (permalink)
Product Manager
 
PhoneCareCenter's Avatar
 
Join Date: Aug 2007
Location: Inside Java
Posts: 1,187
Member: 574123
Status: Offline
Sonork: 100.1581804
Thanks Meter: 1,839
Spreadtrum 6600D

Pinout Detection:

Scanning (please waiting...)
->.........
Scanning results:
VCC:14,GND:4,RXD:8,TXD:6,BOOT:10
>>[V:14 G:4 10 R:8 T:6] Apply to Box


Formatting:

Formatting, Please Power Off & On
Connected
Boot Information:
downloading Boot
CPU Type: 6600D
Flash Type: SAMSUNG K5L2931CAM
Flash Type: SAMSUNG K5L2931CAM
Flsh Size£؛01000000(Hex Bytes)
Baudrate set to:921600
Formatting Nor Flash...
>>Nor Format completed


McnPro Team
  Reply With Quote
The Following 2 Users Say Thank You to PhoneCareCenter For This Useful Post:
Old 07-13-2009, 16:53   #6 (permalink)
Product Manager
 
PhoneCareCenter's Avatar
 
Join Date: Aug 2007
Location: Inside Java
Posts: 1,187
Member: 574123
Status: Offline
Sonork: 100.1581804
Thanks Meter: 1,839
Spreadtrum 6600D

Pinout Detection:

Scanning (please waiting...)
->.........
Scanning results:
VCC:14,GND:4,RXD:8,TXD:6,BOOT:10
>>[V:14 G:4 10 R:8 T:6] Apply to Box


Formatting:

Formatting, Please Power Off & On
Connected
Boot Information:
downloading Boot
CPU Type: 6600D
Flash Type: SAMSUNG K5L2931CAM
Flash Type: SAMSUNG K5L2931CAM
Flsh Size£؛01000000(Hex Bytes)
Baudrate set to:921600
Formatting Nor Flash...
>>Nor Format completed


McnPro Team
  Reply With Quote
The Following 2 Users Say Thank You to PhoneCareCenter For This Useful Post:
Old 07-13-2009, 17:08   #7 (permalink)
Product Manager
 
PhoneCareCenter's Avatar
 
Join Date: Aug 2007
Location: Inside Java
Posts: 1,187
Member: 574123
Status: Offline
Sonork: 100.1581804
Thanks Meter: 1,839
MTK 6225 CPU

Pinout Detection:

Scanning (please waiting...)
->.
Scanning results:
CPU: 6225
VCC:1,GND:3 8,RXD:7,TXD:6
>>[V:1 G:3 8 R:7 T:6] Apply to Box


Reading Firmware:

Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: 6225 Ver: 8A05 SW:8A00
CPU ID: 03DD0800
Downloading Boot...
Nor Flash Code: 00980003(00000000)
Nor Flash Size: 0x01000000 Hex Bytes
INT/EXT RAM Size: 0x0000C000+0x00400000
Verifying Baud...
Set Baud:921600 OK.
Reading(Nor)...
Read OK.
>>total: 4 mins23 s


Formatting:

you can Set Formatting Addr manully
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: 6225 Ver: 8A05 SW:8A00
CPU ID: 03DD0800
Downloading Boot...
Nor Flash Code: 00980003(00000000)
Nor Flash Size: 0x01000000 Hex Bytes
INT/EXT RAM Size: 0x0000C000+0x00400000
Formatting Nor Flash...
Format Start Addr: 0xE00000, Size: 0x200000
>>Formatted OK.


McnPro Team
  Reply With Quote
The Following 2 Users Say Thank You to PhoneCareCenter For This Useful Post:
Old 07-18-2009, 16:25   #8 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
MTK 6223 :

Detail :

LC6223_07A_PCB01_GSM_MT6223_S00.MAUI_07A_W07_36_MP _V13.BIN

Scan RX TX:

Code:
  Scanning (please waiting...)
  ->......
  Scanning results:
  CPU: 6223
  GND:5,RXD:3,TXD:2
>>[G:5 R:3 T:2] Apply to Box


Reading :

Code:
 
Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: 6223 Ver: 8A05  SW:8A00
  CPU ID: 56100C00
  Downloading Boot...
  Nor Flash Code: 00EC257E(25062501)
  Nor Flash Size: 0x00800000 Hex Bytes
  INT/EXT RAM  Size: 0x0000A000+0x00400000
  Verifying Baud...
  Set Baud:921600 OK.
  Reading(Nor)...
  Read OK.
>>total:  2 mins8 s
Flash phone:

Code:
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: 6223 Ver: 8A05  SW:8A00
  CPU ID: 56100C00
  Downloading Boot...
  Nor Flash Code: 00EC257E(25062501)
  Nor Flash Size: 0x00800000 Hex Bytes
  INT/EXT RAM  Size: 0x0000A000+0x00400000
  Verifying Baud...
  Set Baud:921600 OK.
  Proceding MTK6223 CPU encryption...
  the file is no encrypt 1
  Writing(Nor)...
  Write OK.
  Total:  4 mins16 s
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 08-25-2009, 17:55   #9 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Reading phone General Information.

Reading phone General Info:

Scan RX TX:

Code:
  Welcome to use McnBox!
  serial port now: COM5
  S/N:MCN200xxxxxx - xxxx Firmware Ver:V1.04 CheckSum:xxxx-xxxx
  Box Connected !
  The Box High-speed Serial port: COM5
  -------------------------------
  Scanning (please waiting...)
  ->.
  Scanning results:
  CPU: MT6226BA.
  VCC:6,GND:1 10,RXD:12,TXD:7
>>[V:6 G:1 10 R:12 T:7] Apply to Box
Read General Info:
Code:
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: 6226 Ver: 8A02  SW:8A01
  CPU ID: 41DC7088
  Downloading Boot...
  Nor Flash Code: 00EC257E(25082501)
  Nor Flash Size: 0x01000000 Hex Bytes
  INT/EXT RAM  Size: 0x00047000+0x00400000
>>Keep the phone on, if you do other operation
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 08-25-2009, 17:58   #10 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Pickroof lock Code

Pickroof lock Code:


Code:
  Connected to Phone.
  CPU: 6226 Ver: 8A02
  CPUID: 41DC7088
  Read Information From the Phone...
>>Have not found Pickroof lock Code of this phone
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 08-26-2009, 17:04   #11 (permalink)
Product Manager
 
PhoneCareCenter's Avatar
 
Join Date: Aug 2007
Location: Inside Java
Posts: 1,187
Member: 574123
Status: Offline
Sonork: 100.1581804
Thanks Meter: 1,839
Pinout Scan

Scanning (please waiting...)
->..
Scanning results:
CPU: MT6226BA.
VCC:4 5,GND:6 17 18,RXD:12,TXD:10
>>[V:4 5 G:6 17 18 R:12 T:10] Apply to Box


Read Flash

Verifying Baud...
Set Baud:921600 OK.
Reading(Nor)...
Read OK.
total: 4 mins21 s


Format

you can Set Formatting Addr manully
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: 6226 Ver: 8A02 SW:8A01
CPU ID: 391B11D2
Downloading Boot...
Nor Flash Code: 00EC257E(25082501)
Nor Flash Size: 0x01000000 Hex Bytes
INT/EXT RAM Size: 0x00047000+0x00400000
Formatting Nor Flash...
Format Start Addr: 0xE00000, Size: 0x200000
Formatted OK.
>>Keep the phone on, if you do other operation


Fast & Easy

McnPro Team
  Reply With Quote
The Following 2 Users Say Thank You to PhoneCareCenter For This Useful Post:
Old 08-30-2009, 00:03   #12 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
6600m SPD with new beta version 2.7.1 reading /backup

6600m SPD with new beta version 2.7.1 reading /backup
Code:
Connecting...
Connected
Loading Boot...
CPU    Type: 6600M/E
Flash  Type: Nor
Flash    ID: 00EC257E(25082501)
Flash  Size: 1000000(16m)
Flash Model: K5l6331CAM
Reading...
Operation completed
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 08-30-2009, 00:08   #13 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
6600m SPD with new beta version 2.7.1 flashing

6600m SPD with new beta version 2.7.1 flashing

Code:
Connecting...
Connected
Loading Boot...
CPU    Type: 6600M/E
Flash  Type: Nor
Flash    ID: 00EC257E(25082501)
Flash  Size: 1000000(16m)
Flash Model: K5l6331CAM
Flashing...
Operation completed
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 10-28-2009, 20:33   #14 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Test MTK Chipset CPU: MT6229

Scan RX TX :

Code:
Welcome to use McnBox!
  Selected COM16
  Initialize in progress...
  Checking data, wait...
  Serial number: MCN200xxxxx - xxxxx
  Firmware version: V1.05
  Checksum value: 3883-xxxx
  Box Connected!
  Box Operating at high speed port: COM16
  -------------------------------
  Start Scanning...
  ->..
  Scan Results:
  MTK Chipset CPU: MT6229.
  VCC:1 2,GND:8 11 15,RXD:5,TXD:6
>>[V:1 2 G:8 11 15 R:5 T:6] Apply to Box
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Old 10-28-2009, 20:35   #15 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,891
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,616
Read General Info:

Code:
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: 6229 Ver: 8A02  SW:8A02
  CPU ID: 02200101
  Downloading Boot...
  Nand Flash Type: [TOSHIBA] TC58NVG0S3AFT
  Nand Flash Code: 009800F1(00800095)
  Nand Flash Size: 0x08400000 Hex Bytes
  INT/EXT RAM  Size: 0x00020000+0x00000000
>>Keep the phone on, if you do other operation
  Reply With Quote
The Following 2 Users Say Thank You to Mcnbox For This Useful Post:
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 02:17.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.32187 seconds with 9 queries

SEO by vBSEO