GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > McnBox Team Products > McnPro Box

Reply
 
LinkBack Thread Tools Display Modes
Old 03-17-2011, 09:40   #61 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
problem sim card 1,2 show emergency call

this is alog
Welcome to use McnBox!
Selected COM20 COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN************
Firmware V1.09
Checksum 5BEA-72BE
Box Connected!
Ready working at COM20
-------------------------------
Start Scanning...
->
Results:
CPU: MT6223.
VCC:1,GND:4 12,RXD:10,TXD:6
[V:1 G:4 12 R:10 T:6] Apply to Box
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, SN1: 35921802508979-3
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, SN2: 35921802513979-6
now phone work ok
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-18-2011, 17:25   #62 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
success read flash file and nv backup

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN********
Firmware V1.09
Checksum 5BEA-72BE
Box Connected!
Ready working at COM21
-------------------------------
Start Scanning...
->
Results:
CPU: MT6253.
VCC:8,GND:9 10,RXD:1,TXD:3
[V:8 G:9 10 R:1 T:3] Apply to Box
Phone detected, wait..
CPU: 6253 Ver: 8A02 SW:8A00
CPU ID: 00000F00
Initialize Boot6 ...
Flash(Nor) Type [SPANSION] S29NS128P
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud،*
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
XKSSTEL53_09B_GEMINI_PCB01_GPRS_MT6253_S00.S003_XK L_SAM_V1_8_1013.BIN_FLNK5N2833ATB_AQ12000
Read Done !
Time used: 4 mins 18 s
File Saved: D:\China Flash Files.mcn\nokia_xkl-k2\XKSSTEL53_09B_GEMINI_PCB01_GPRS_MT6253_S00.S003 _XKL_SAM_V1_8_1013.BIN_FLNK5N2833ATB_AQ12000
**********************************
***************************************


Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN******
Firmware V1.09
Checksum 5BEA-72BE
Box Connected!
Ready working at COM21
-------------------------------
Start Scanning...
->
Results:
CPU: MT6253.
VCC:8,GND:9 10,RXD:1,TXD:3
[V:8 G:9 10 R:1 T:3] Apply to Box
Press and Holding Power button now !
Connecting, wait...
CPU: 6253 Ver: 8A02
CPUID: 00000F00
Release Power Button now
Phone detected
NV Data saved to: D:\China Flash Files.mcn\nokia_xkl-k2\nokia_xkl-k2.nv
Backup Done.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-19-2011, 08:12   #63 (permalink)
Product Supporter
 
hacell's Avatar
 
Join Date: Oct 2009
Location: love me if you can
Posts: 722
Member: 1150088
Status: Offline
Sonork: ============
Thanks Meter: 254
Cool with gpg dead with mcn alive

GG 53A dead flash with gpg dragon finish but stiil dead

Try using MCN pro handset is normally

Chek it log

Welcome to use McnBox!
Selected COM3 COM6
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNXXXXXXXXXXXX
Firmware V1.09
Checksum 79C1-59BE
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->.......
Results:
MTK Chipset CPU: MT6223.
GND:10,RXD:1,TXD:7
[G:10 R:1 T:7] Apply to Box
[G:10 R:1 T:7] Apply to Box
================================================== ==========================
The File Information:
MIKI23C_09A_GEMINI_PCB01_GPRS_MT6223P_S00.MAUI_09A _W09_36_MP_V9.BIN
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6223 Ver: 8A05 SW:8A00
CPU ID: A4AD0C00
Please select Boot5
Initialize Boot4 ...
Flash(Nor) Type [SPANSION] S29GL064AT/71GL064NB
Flash(Nor) Code 0001227E(22102201)
Flash(Nor) Size 0x00800000 Hex Bytes
Checking baudĄ*
Set Baud:921600 Done.
Start Writing(Nor)...
Write Done !


Thanks mcn team un still update for user MCN
  Reply With Quote
The Following User Says Thank You to hacell For This Useful Post:
Old 03-23-2011, 08:21   #64 (permalink)
Product Manager
 
Mcnbox's Avatar
 
Join Date: Mar 2008
Posts: 1,880
Member: 726283
Status: Offline
Sonork: 100.76027
Thanks Meter: 7,540
Box Connected!
...........
[G:7 8 11 12 16 D-:9 D+:10] Apply to Box
If Scan other phone, please click [Stop]
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM8
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Done.
Setting baudrate...
921600
Set baud Done
CPU Info 6600M/E
Flash Type NOR
Flash ID 00EC257E(25082501)
Flash Model K5L2931CAM
Flash Size 0x1000000(16.0M)
Start Reading...
Read Done!
File saved: D:\mcnpro files\SPD\6600M_E_K5L2931CAM.bin
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM8
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Done.
Setting baudrate...
921600
Set baud Done
CPU Info 6600M/E
Flash Type NOR
Flash ID 00EC257E(25082501)
Flash Model K5L2931CAM
Flash Size 0x1000000(16.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done.
  Reply With Quote
Old 03-23-2011, 09:11   #65 (permalink)
Freak Poster
 
79mobile's Avatar
 
Join Date: May 2006
Location: On The Way
Age: 39
Posts: 409
Member: 272091
Status: Offline
Sonork: 100:114011
Thanks Meter: 123
Welcome to use McnBox!
Selected COM63
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNXXXXXXXXXXXXXX
Firmware V1.09
Checksum XXXX-XXXX
Box Connected!
Ready working at COM63
-------------------------------
Start Scanning...
->......
Results:
MTK Chipset CPU: MT6235.
GND:10,RXD:3,TXD:1,BOOT:2
[G:10 R:3 T:1 Up:2] Apply to Box
[G:10 R:3 T:1 Up:2] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6235 Ver: 8A04 SW:8A01
CPU ID: 00000300
Initialize Boot4 ...
Flash(Nand) Type [HYNIX] H8BCS0PG0MBP
Flash(Nand) Code 00AD00A1(00800015)
Flash(Nand) Size 0x08400000 Hex Bytes
Press and Holding Power button now !
Connecting, wait...
CPU: 6235 Ver: 8A04
CPUID: 00000300
Release Power Button now
Phone detected
Infr: MT6235_IM640_A2_TH-T001[C2098_V3_2_1]_CELLONSZ35_09A_HW_Melody_V0.0
NV Data saved to: F:\SOFT WARE ALL-BOX\McnPro Box\IMOBILE640_NV_MT6235_IM640_A2_TH-T001[C2098_V3_2_1]_CELLONSZ35_09A_HW_Melody_V0.0
Backup Done.

THANKS FOR NEW UPDATE.
B.R.,
  Reply With Quote
The Following 2 Users Say Thank You to 79mobile For This Useful Post:
Old 03-23-2011, 09:25   #66 (permalink)
Freak Poster
 
79mobile's Avatar
 
Join Date: May 2006
Location: On The Way
Age: 39
Posts: 409
Member: 272091
Status: Offline
Sonork: 100:114011
Thanks Meter: 123
Start Scanning...
->.......
Results:
MTK Chipset CPU: MT6235.
VCC:21,GND:1 2 15 16,RXD:19,TXD:18,BOOT:3
[V:21 G:1 2 15 16 R:19 T:18 Up:3] Apply to Box
[V:21 G:1 2 15 16 R:19 T:18 Up:3] Apply to Box
Press and Holding Power button now !
Connecting, wait...
CPU: 6235 Ver: 8A04
CPUID: 00000300
Release Power Button now
Phone detected
Infr: MT6235_V_1.0.0_F25A_JBL_Melody_V0.0
NV Data saved to: F:\SOFT WARE ALL-BOX\McnPro Box\IPHONE-J8-BLACK_NV_MT6235_V_1.0.0_F25A_JBL_Melody_V0.0
Backup Done.

B.R.,
  Reply With Quote
The Following 2 Users Say Thank You to 79mobile For This Useful Post:
Old 03-23-2011, 09:34   #67 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
success read flash file spd

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN***********
Firmware V1.09
Checksum ****-****
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Not support,Please Try other boot.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810(FFFFFFFF)
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Reading...
Read Done!
File saved: D:\China Flash Files.mcn\6600L_WT6228_ST M58WR064ET.bin
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-23-2011, 09:54   #68 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
read user code spd

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN***********
Firmware V1.09
Checksum ****-****
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810(FFFFFFFF)
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Privacy Code: 1234
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-23-2011, 09:55   #69 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
set new imei direct spd success


Checksum 5BEA-72BE
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Detect Charge-pin...
Vcc-Pin6 Set to empty
Detect Charge-pin complete
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Enter test mode,wait...
Test mode,OK
ReImei,wait...
ReImei Completed.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-23-2011, 09:59   #70 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
factory set spd success

Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done
.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-23-2011, 10:19   #71 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
write flash file to spd ok

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN*******
Firmware V1.09
Checksum ****-****
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Not support,Please Try other boot.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810(FFFFFFFF)
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 03-23-2011, 10:36   #72 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
format spd ok

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN*********
Firmware V1.09
Checksum *********
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Not support,Please Try other boot.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810(FFFFFFFF)
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Boot Not support.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Reapply Pinouts to Box or Pwr on/off
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Reapply Pinouts to Box or Pwr on/off
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Done..
Start Formatting,Wait...
Start Addr:7A0000 Size:40000
Format Done.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 04-01-2011, 14:00   #73 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
Successfully WRITE FLASH FILE MTK6253

The File Information:
UNISCOPE53_09A_PCB01_GPRS_MT6253_S00.V52B99.BIN
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02 SW:8A00
CPU ID: 00000F00
Initialize Boot6 ...
Flash(Nor) Type [TOSHIBA] TC58FYM7T8C
Flash(Nor) Code 0098009E(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud،*
Set Baud:921600 Done.
Start Writing(Nor)...
Write Done !
Time used: 4 m 27 s
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 04-14-2011, 14:19   #74 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
success read flash file MTK 6253

Start Scanning...
->.
Results:
CPU: MT6253.
VCC:8,GND:10,RXD:3,TXD:1
[V:8 G:10 R:3 T:1] Apply to Box
Comm Error 001efinitions may be incorrect, to scan again
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A02 SW:8A00
CPU ID: 00000F00
Initialize Boot6 ...
Flash(Nor) Type [INTEL] PF38F30xxM0x1xx
Flash(Nor) Code 00898903(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud،*
Set Baud:921600 Done.
Start Reading(Nor)...
Read Done !
Time used: 4 mins 16 s
File Saved: D:\China Flash Files.mcn\al-namer\al-namer.bin
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Old 04-14-2011, 14:23   #75 (permalink)
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
Success read nv file mtk 6253

Press and Holding Power button now !
Connecting, wait...
CPU: 6253 Ver: 8A02CPUID: 00000F00
Release Power Button now
Phone detected
Infr: MT6253_V52B04_09A_HW_Melody_V0.0
NV Data saved to: D:\China Flash Files.mcn\al-namer\NV_MT6253_V52B04_09A_HW_Melody_V0.0
Backup Done.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 17 06-21-2013 06:06
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 07-03-2012 13:42
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 12-18-2011 11:00
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 06:43.



Powered by Searchlight © 2014 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2014 -
Page generated in 0.49259 seconds with 8 queries

SEO by vBSEO